A beret is an elegant and feminine headdress that is designed to prevent hypothermia of the head in autumn and spring. It adds tenderness, romanticism, and Parisian chic to the image, and has remained relevant and fashionable for several decades in a row. How to knit a beret for yourself? Even a novice needlewoman can cope with this task. There are many techniques and patterns using plaits, braids, enterlac, stars, honeycombs. Both warm knitted berets and hats made of fine cotton yarn, which are translucent and airy, are popular.

Step-by-step instructions with diagrams and job descriptions

When you have chosen a beret model for knitting, you should select yarn that matches the color and thickness, and knitting needles. Synthetic or natural thread can be used. Half-wool or wool is used for winter hats because it retains heat well. A thin cotton thread is ideal for summer as it allows air to pass through and does not overheat the skin.

Knitting pattern for a beret made of thick yarn using an English rib

How to knit a lady's beret using an English elastic band? A model with such a pattern looks beautiful, and there is nothing tricky or complicated in its creation. For knitting you will need 100-150 g of yarn. Step by step instructions:

• Start knitting from the edge (height 3 cm) with a simple rib or a garter pattern with thinner needles.
• Continue knitting with the main pattern. English rib needs to be knitted with thicker knitting needles: the first row is 1 knit, purl 1, the second row is 1 knit, straight yarn over, the purl one is removed, the loop that remains on the right knitting needle is not knitted.
• The head of the beret is 10-13 cm, excluding the height of the side. Then switch to a 1x1 elastic band, knitting 4 rows like this. Then the loops are decreased according to the scheme described below: 1 row – 2 p.l., 1 l., 1 p.; 2 – knit according to the pattern; 3 – 2 p.l., 1 p.; 4 – according to the drawing; 5 – we knit completely 2 sts. l. below; 6 – from.; 7 – repeat 5; 8 – repeat 6.
• Next, tear off a thread of such size that it is enough to sew the beret together. We remove the remaining loops onto the thread and tighten them tightly. We sew the beret, grabbing 2 threads along the edge.

Master class on knitting a warm beret with large braids

One of the interesting, voluminous and beautiful patterns is braids. It is ideal for creating a lush, warm headdress. To work you will need 150 g of yarn, double-ended and circular knitting needles. Step by step instructions:

• Cast on loops according to the girth size, knit 10 circular rows with a 3x3 elastic band. After this there is a transition row: 3 p., 1 l., 1 yarn over, 1 l., 1 yarn over, 2 l., 1 p., 2 l., 1 yarn over, 1 l., 1 yarn over, 1 l. Continue this pattern to the end of the row.
• Switch to larger diameter knitting needles and knit 7-8 repeats with a braid pattern.
• Next row in the round: purl three together. Next we knit 2 liters each. behind the front wall to the end of the row. Cut the working thread and fasten.

French voluminous mohair beret for the winter

Voluminous berets always remain in fashion. They retain heat well and look interesting. For knitting you will need 150 g of mohair, knitting needles No. 7. Step by step instructions:

• First, knit the upper part of the beret: cast on 91 loops, knit with an elastic band of 1 k, purl 2. Make the fabric 23 cm, then decrease 30 stitches in the first row. Make a three-centimeter elastic band.
• Decrease 30 stitches again. Knit with an elastic band until the height of the upper part reaches 28 cm. Tighten the open loops.
• The binding is knitted separately according to the pattern: 1 r. – 1 p., 9 p., 1 p.; 2 r. – 1 p., 9 p., 1 p.; 3 – 1 purl, 3 knitting needles, remove three on an additional knitting needle, 3 l., knit the removed knitting needles, finish with a purl; 4 – 1 purl, 3 liters, remove three for an additional 3 liters, knit the removed ones with knit stitches, finish with a purl; 5 – purl 1, knit 9, purl 1; 6 – purl 1, knit 9, purl 1; 7 - 1 purl, remove three again for an additional one, knit 3, knit the removed knits, 3 knits, 1 purl; 8 - 1 purl, again we remove three for an additional one, 3 liters, knit the removed ones with knit stitches, 3 liters, 1 purl.
• We repeat the rows until the length of the binding reaches 56 cm. We close all the loops. To assemble the beret, we make a seam along the smaller edge of the binding and on the top part. Sew to the bottom edge of the top, making small gathers.

Beautiful openwork beret made of fine yarn

Knitted berets can be openwork, with shaped gaps, which makes the product a decorative accessory. The version of the headdress proposed in the master class is knitted quickly and easily. To work you will need sock knitting needles No. 3.5, 60 g of thin yarn, a crochet hook, circular knitting needles No. 3, No. 3.5. Step-by-step master class:

• For the strap, cast on 11 sts on size 3 circular needles. We knit with an elastic band 1x1 52 cm.
• Close the loops and crochet the edges.
• From the edge loops we raise the front strips: one loop from the edge, yarn over.
• We knit 4 rows in a circle: first – knit; 2 – facial; 3 – 2 loops alternately knit together, yarn over; 4 – facial.
• We knit a couple of rows with a scarf pattern.
• We alternate openwork and scarf patterns.
• We knit 11 cm, form the bottom with a garter pattern, decreasing the required number of loops in every fourth row, knitting together 3 and 4 of one knit stitch. We make reductions 5 times, knitting 20 rows.
• We knit the remaining two knit stitches.
• We assemble the last row with a crochet hook.
• Cast on 5 loops, knit a five-centimeter elastic band, and close.
• Fold the piece in half and crochet the ends. Place the resulting loop in the hole between the remaining beret loops and tighten the loops.

Fashionable youth hat in the shape of an angora beret

In this master class you will learn how to knit a deep youth headdress. It looks voluminous and beautiful due to the cone pattern. For it you need to select 150 g of angora wool yarn, knitting needles No. 5, No. 7. Step-by-step instruction:

• We cast on No. 7 82 loops. We start with the cone pattern: 1 r. - purl; 2 – 1 chrome, *3 in. purl, from 1 p. knit 3 (1 p., 1 p., 1 p.)*, repeat the area marked with asterisks, 1 edge; 3 – purl, 4 – 1 edge, *knit 3 from 1 loop 3, 3 inm. purl*, repeat the area marked with asterisks.
• At a height of 14 cm between the edges, cut by 16 loops. Do this three times on every other row.
• Next, cut by 8 stitches on the purl row. Tighten the loops with thread.
• On smaller knitting needles, pick up stitches along the cast-on row, knit 6 cm with a pearl pattern: alternating 1 stitch, purl 1. Sew a seam at the back of the head.

Description of a pretty beret for a girl

This master class describes the process of knitting a beautiful beret for a child. It is very simple to make, so even a novice needlewoman can master this product. For knitting, you need 100 g of yarn of the selected color, circular knitting needles No. 3. Step-by-step instructions:

• Cast on 88 loops, make a four-centimeter 1x1 elastic band.
• Knit 1 p. knit stitches, the next one – purl stitches.
• Again make 4 cm with an elastic band.
• Add 2 knits, yarn over. Knit only with knit stitches, increasing throughout the entire row.
• Next, knit with knit stitches without making any increases.
• After 40 rows we make decreases: 10 l., 2 l together. After one row without decreases.
• Next decrease: 9 l., 2 l together. Next row without cuts.
• Third decrease: 8 l., 2 l together. The next one is without abbreviations.
• Continue decreasing until 12 stitches remain. Pull it together with thread and sew a seam at the back.

How to knit a beret from melange yarn in a simple way

Melange yarn is most often used for simple patterns, since the thread itself looks original. In this master class you will learn how to knit a beret in an easy way. To create a headdress, you need to select 100 g of yarn of the color you like, knitting needles No. 3, No. 5. Step by step instructions:

• For a C grade, cast on 9 loops, making an elastic band 52 cm long.
• Raise the loops on a five, working on the long edge of the rim: one loop from the side braid, one yarn over.
• Knit all knit stitches in the purl row.
• We make 10 cm in garter stitch.
• We make decreases by knitting together through a couple of loops.
• We repeat the cuts three times every three rows.
• We knit 2 loops together and tighten the remaining ones with thread. We sew the beret with a knitted seam.

Stylish autumn beret made of grass on knitting needles

Grass is a long-pile thread used in knitting. The products come out original and beautiful. This yarn is good for beginners because it hides all the flaws. For a beret you will need 100 g of grass, 100 g of wool, knitting needles No. 4.5, No. 6. Step by step instructions:

• Cast on 60 stitches with wool on knitting needles No. 4.5. Make 4 cm with a 1x1 elastic band.
• Join the grass and wool together and continue knitting using size 6 needles.
• Every 5 we add a loop to get an extension.
• Knit 5 cm straight.
• We shorten each knit stitch by decreasing a stitch every 5.
• Gather the remaining loops and pull off. Using a knit stitch, join the edges of the beret together.

Method of knitting a beret using short rows of melange yarn

The pattern presented in this master class is knitted in short rows using wedges. The product looks very interesting, especially together with a similar scarf. It is better to use melange yarn in purple, brown or another color. Step by step instructions:

• Cast on 65 stitches, knit one row.
• Next you need to shorten the row by 3 loops on the right.
• We under-knit 2 loops in rows 4 to 32 in each even row.
• On the left, we simultaneously under-knit 4 sts in the 25th row, 3 sts in 27, 29, 31, 33.
• Turn the knitting and knit all the stitches on the right needle.
• We make another row, knitting all the loops of the shortened rows.
• It turns out a wedge, of which 12 pieces are needed.
• Sew the vertical seam of the beret. Measure the elastic band according to the circumference of your head and connect it into a circle.
• Fold up the bottom of the beret and hem it with invisible stitches, inserting an elastic band.

How to knit a beret from bouclé yarn

Hats knitted with boucle yarn look very interesting and original. This thread does not require the use of tricky patterns, since it is self-sufficient on its own. To work you will need 200 g of bouclé yarn, knitting needles No. 3, No. 3.5. Step-by-step instructions:

• We cast on 88 loops on smaller knitting needles, making a three-centimeter 1x1 elastic band.
• We continue with large knitting needles. We knit in purl stitch or stockinette stitch.
• In the first row we add a loop from the broach every 11 stitches.
• We knit the next 4 rows evenly.
• We make additions several times in a checkerboard pattern.
• We knit 3 cm evenly.
• We cut each knit stitch by 12 stitches.
• When there are 10 stitches left, we collect them in a bunch with thread and fasten them from the inside out.

Description of knitting patterns for berets

The beret is considered not just an ordinary headdress, but also an adornment of a woman’s image. Thanks to the abundance of all kinds of patterns, a hand-knitted hat can become a real work of art. Expressive, delicate woolen intricacies of threads emphasize the oval of a woman’s face in a way that no other headdress can, while reliably retaining heat and shading the created image.

The zigzag pattern is a variant of openwork knitting. It perfectly combines even contrasting colors, creating a wavy pattern with breaking lines. Zigzag gives knitted items a modern, dynamic look. Even a beginner can master it.

Hedgehog – This pattern is created by adding yarn overs. The pattern is knitted very simply, but it looks interesting and original. The pattern looks beautiful in snoods, hats, and children's clothes, which are voluminous and fluffy.

Peacock tail - combines wavy lines. It looks very impressive, as you can see from the photo. The peacock tail looks especially interesting when using fancy yarn, including melange.

Leaves - the pattern looks very elegant and charming. A beret with this pattern is ideal for autumn. Leaves are created by alternating decreases and yarn overs. Suitable for knitting hats, tunics, blouses, easy to make.

Video tutorials on knitting hats and berets for beginners

A beret is a fashionable women's headdress that can create a stylish look with both a feminine outfit and casual jeans. You can choose a model for different face types. The advantage of the form lies in the fact that it suits almost everyone. The YouTube videos below clearly describe the process of knitting hats with different patterns: with wedges, corn, braids. A knitting demonstration will allow any novice craftswoman to master creating a beret with her own hands. The main thing is to be patient and carefully follow the actions of the needlewomen in the video.

How to knit a classic beret with wedges with your own hands

A detailed lesson on knitting a beret hat for a woman

Beret with knitting needles with a “Corn” pattern

The knitted beret is again at the peak of popularity today. There are many options for implementation: from openwork to voluminous, from classic, laconic to flirty. Knitting a beret is a rather exciting activity that does not require much experience. In this article we will tell you how to knit a beret with knitting needles; the diagram and description represent different models.

“Gerda”, patterns and descriptions of different sizes of hats

Sizes: S/M (M/L). The height of the finished hat is 24cm.

We need:

• yarn (65% wool, 35% alpaca) 50g per 75m;
• set of hosiery sp. No5;
• circular sp. No5, length 40cm;
• circular sp. No3.5.

Patterns:

Knitting density: 17p. for 26 rub. in the relief drawing they correspond to a square of 10 cm by 10 cm.

Description - how to knit a beret

The knitting pattern for the “Gerda” model is from bottom to top.

We dial 84 (96) p. on the sp. No. 3.5 and knit with your own hands in the round 10 rubles. rubber bands. And we start it with 3 purls. P.

Track. r.: *3i., 1l., 1n., 1l., 1n., 2l., 1i., 2l., 1n., 1l, 1n., 1l.* – repeat from * to * until the end of the row. We have 112(128)p. Let's go to sp. No5.

Track. r.: *3i., relief - see the diagram (yarn overs before knitting knit stitches for the lower segments)* - repeat from * to * on all stitches of the row (this is 7 (8) repeats). When the number of loops in the work decreases, we switch to stocking stitches. Having knitted a rapport in height - 42 (48) p., in the next. R. we make reductions. The scheme is as follows: every 3 p. We knit elastic bands in 1 purl. We have 28(32)p left. Next R. every 2 persons we knit stitches in 1 person. p. We have 14 (16) p. left. We break the thread, hook it through the remaining loops, tighten it, bring it to the wrong side and fasten it.

Fashionable beret-hat with a large braid: video MK

Takes with knitting needles from bouclé yarn, description

Women's bouclé hats are spectacular and warm at the same time. These types of hats are suitable for winter weather and early spring. Easy to knit - knitting or crocheting. This model is size 56.

We need:

• boucle yarn – 90g;
• set of hosiery sp. No5;
• markers (M).

Patterns: stockinette stitch - when knitting in the round, knit all stitches.

Description and diagrams - how to tie a beret

First, you need to knit a sample with your own hands from the selected yarn for the face hats. satin stitch Determine the knitting density. Using the pattern, calculate the required number of loops.

We cast on the required number of loops. It should be divisible by 6, but if according to your calculations it doesn’t work out, round it down to the nearest multiple of six, or better yet, round it up. We switch to circular knitting, distributing the loops into 4 sp. Knit one row, placing an M at the edge of the six wedges.

We continue knitting hats for women with our own hands, making increases in every 4th row: in each of the wedges, 1 stitch. Having received 6 cm in height, we stop increasing. Next, take the knitting needles and knit exactly another 2 cm. Now we will make decreases, mirror increases: in every 4th r. at a height of up to 8 cm. Then we make the same decreases in every 2nd r. Having knitted to the desired height, we break the thread, thread it through the remaining loops, tighten it, hook it to the wrong side and fasten it.

When working, it is advisable to compare women's hats with the pattern and, if necessary, adjust decreases/increases.

At the bottom of the hat for women, we crochet the headband using single crochets. Its height is about 5cm.

Beretik with braids “Starr”: video master class for beginners

Volumetric beret with knitting needles, description

Model of hats for women with a head circumference of 54/56cm.

To knit a hat we need:

• yarn, 55% wool (50g per 70m) – 150g;
• sets of hosiery sp. No5 and No6;
• auxiliary sleep;
• markers.

Patterns:

• garter stitch: when knitting in the round, alternate 1 p. facial from 1 rub. inside out P.;
• persons satin stitch: when knitting in the round - only knit stitches;
• main pattern:
  from 1st to 4th row: persons. gl.;
  5 p.: * 8 p., 1 open bump from 6 sts (on 6 p., using an auxiliary knitting needle, we knit 8 p. knit. Ch., Return p. to the right sp.) * - repeat from * to * for all items;
  from 6th to 9th day: persons. gl.;
  10 rubles: *1 l., 1 open cone, 7 faces. (the bumps move)* – repeat from * to * for all sts.
  Repeat from 1st to 10th row.

Knitting density: using needles No. 6 in the main pattern, 14.5 stitches by 21 stitches. correspond to a 10cm by 10cm square.

We knit a voluminous beret with knitting needles

We start knitting a hat with a set of sp. No5 78p. Having knitted a 4cm handkerchief with your own hands. drawing, go to sp. No6. Let's move on to the main drawing, in the first row. make a uniform increase of 34p. We get 112p. Having completed 30r. – see patterns with cones, move on to faces. Ch.

Now we will make reductions. The scheme is as follows: we mark every 14th stitch with a marker and the next. R. knit each marked and previous stitch in 1 stitch. Next, we make decreases in each row. When 8 stitches remain, break the thread, thread it through the loops, tighten it, hook it to the wrong side, and fasten it.

We tie the bottom of the hat and the 1st p. basic single crochet pattern.

Volumetric beret: video master class

DIY summer openwork beret for women, description

This type of hat is for a woman with a head volume of 53.5 cm.

For this openwork beret we need:

• yarn (100g per 274m) – 100g;
• circular sp. 40cm long No.3.75 and No.4;
• hook No.4.

Patterns and description of technology:

elastic band 2 knits x 2 purls;

2PL – 2p. together to the left: knit two sts. in the usual way;

2PP – 2p. together to the right: swap the second and first sp. on the left back and knit them in 1 knit.

We knit a summer openwork beret

We dial sp. No3.75 96p. and switch to circular knitting. Having tied 5 rubles. faces., go to the elastic band.

Having knitted 12 rubles with our own hands, we change the patterns:

• track. row: *2l., from 1p. -K2* -repeat from * to * for the entire row. We have 144p;
• track. r.: persons.

Repeat from 1st to 10th row. diagrams 5 times. Next we make decreases:

1st: *4i., 2pp, 4l., 2pl, 4i.* – repeat from * to *;

2p.: *3i., 2PP, 4l., 2PL, 3i.* – repeat from * to *;

3r.: *3i., 6l., 3i.* – repeat from * to *;

4p.: *2i., 2PP, 4l., 2PL, 2i.* – repeat from * to *;

5p.: *2i., 2PP, 2l., 2PL, 2i.* – repeat from * to *;

6r.: *1i., 2pp, 2l., 2pl, 1i.* – repeat from * to *;

7p.: *1i., 4l., 1i.* – duplicate from * to *;

8p.: *2PP, 2l., 2PL* – duplicate from * to *

9p.: *1l., 2pp, 1l.* – duplicate from * to *;

10 rubles: *2 PP, 1 l.* – duplicate from * to *;

11 rubles: *2 PP* – duplicate from * to *. We have 9p.

Break the thread, thread it through the remaining loops, tighten, hook it to the wrong side, and fasten.

An openwork beret for women, knitted with your own hands, is ready!

Selection of schemes

An English-style beret with a pompom is what you need for those who want to look elegant. And also a beautiful pattern and shape of the beret. Isn't this a reason to please yourself with a new thing? How to tie a beret in English...

Another autumn one adds knitting needles to your personal collection of interesting models of hats. Pleasant yarn in autumn shades and a mix of various patterns delight the eye and beckon you to pick up your knitting needles as soon as possible. Shall we knit? ...

Are there many hats? Probably not, after all. Cold weather in some regions lasts more than six months, but you want to wear something new. And if changing outerwear often may not be possible on your budget...

Have you already knitted a new headdress for the coming cold season? Today we invite you to pay attention to an excellent option for a voluminous beret. This model can also be called a cap, as it looks very unique...

This DIY beret is a great craft project for the upcoming spring. Berets are knitted and crocheted, and also sewn from various materials. There are so many patterns for knitted berets that it can sometimes be difficult to make...

The knitted beret has long become a classic. Do you know that the shape of the classic beret has not changed since the Middle Ages? This headdress has a circle at the base, while the crown has the shape of a “donut”. In practice, knitting is classical...

What do you think about berets? This is a headdress that usually leaves no one indifferent: you either like it or absolutely don’t, however, it’s impossible to say weakly that you don’t know what you think about it. Counts...

A bright beret with knitting needles and matching mitts can change not only your mood, but also the world around you! Don't believe me? Well, think for yourself, if you are wearing a bright yellow sunny beret, will it be a bad day? However, if...

The beret was sent to our “Hats and Sets” competition. Linked by Tatyana Brin.

Yarn Nako "Angora Soft" in 2 plies plus Pekhorka "Children's whim" in 1 thread.
The total weight of the beret is about 90 g, 56 cm.

interesting selection for the site 20 adult models, no children's models

Knitting needles for elastic - No. 2.5, for the main part - No. 3

Headband:
Several rows of hollow elastic: cast on half the required number of stitches with a contrasting thread on smaller needles (I cast on 72 stitches) and then go to the main stitch. a thread.
1st row - chrome, * front, yarn over, * to the end of the row, chrome; i.e., we restore the required number of loops (144)
2nd row – knit yarn overs, remove purl loop without knitting, thread BEFORE the loop.
3rd row – we knit the front loops with the front ones, remove the purl ones, thread BEFORE work.
4th row - like the third.
At this stage we have a “hollow” (double) elastic band, with a 1x1 loop arrangement.
Then compacted elastic band 1×1: knit. rows – *knit, purl* repeat, purl. rows – remove 1 stitch, thread before work, knit* repeat.
Knit to the desired height (mine is about 4 cm).

Main part:
Knit the pattern according to the diagram, at the same time evenly increase 39 stitches. That is, 10 pattern repeats, 2 edge repeats. At the same time, at the very beginning of 1 repeat, 2 stitches are knitted together (and not 3, as in the diagram) and at the very end of the row, after the loops of the last repeat, the first loops of the first repeat are repeated for symmetry (2 stitches together). You should get 183 stitches.
Then knit the desired height (in a white beret this is 1.5 leaves).

Beret knitting pattern:

Scheme for reducing the crown:

The diagrams show only odd rows. Designations:
vertical line - front loop;
horizontal line - purl loop;
circle - yarn over;
isosceles triangle - three loops together.

I tied the remaining loops together with thread and sewed the beret along the seam (mattress stitch).

The popularity of the beret is difficult to convey. This item of clothing is liked by everyone - children, men and women. Among women's accessories and fashionable items, the openwork beret is perhaps the most sought after.

Berets are knitted warm for autumn and winter, light for spring and summer. There is a worthy use for this item in any season. Every knitter has knitted an openwork beret at least once. Therefore, finding a description and diagrams will not be difficult.

Craftswomen are happy to share their achievements. After all, it is impossible to repeat a thing exactly and no two are alike. Fashionistas move on. They perform berets with knitting needles in one pattern complete with:

Very fashionable openwork beret models with a visor. They are worn with pleasure by older girls and children.

Let's look at the main points of knitting an openwork headdress.

Be sure to first select the knitting patterns for your beret. This is important because the composition of the yarn you should use depends on the beret model.

To knit a warm beret from openwork, mohair or wool (clean, with the addition of another thread) is suitable. For the summer version of the beret, it is better to choose a cotton thread. It holds the pattern clearly and does not smudge it like, for example, mohair.

Decide on your knitting technique. An openwork beret can be knitted:

• from the elastic band or from below;
• from the crown or above;
• cross knitting;
• from motives.

Practice techniques with different sets of knitting stitches. It is better to start taking berets using the Italian dialing method.

Carefully read the description of the beret model. You may have questions that are best resolved in advance.

Be sure to run a test sample. With its help, you can easily see the correspondence between the pattern and the yarn, calculate the number of loops, and determine the degree of thread tension for smooth execution of the pattern.

Technology for performing openwork new clothes

Option 1

In the first option, take it from below and start working with an elastic band.

Option 2

Option two is knitting an openwork beret on top.

A few words about elastic bands. It can be a classic - 1x1, 2x2 or a strip with braids. It all depends on your skill and imagination. The last step is to sew and remove all the ends of the threads.

Visual video tutorials and ideas for designing berets

Many craftswomen like to decorate their openwork berets. They use different decorative options - embroidery, rhinestones, beads, sequins, even leather or fabric inserts. Every idea can be found on the Internet in blogs and forums. Knitters lay out patterns for their openwork berets and discuss them.

Several patterns for knitting a beret