Knitted and crocheted slippers. How to knit slippers with knitting needles. Diagram and description on two knitting needles, photo and video tutorials. Step-by-step instructions for knitting baby slippers

Knitting for younger schoolchildren

Audience: The master class is intended for classes with third grade students.

Knitting "Slippers". Master Class

Target: knit slippers.

Tasks: instill aesthetic taste; develop motor skills, eye; cultivate neatness.

Progress of the lesson

Mystery:

Cheerful brothers live in the hallway

Welcome guests are eagerly awaited.

Such fluffy little paws -

Cozy, soft... Slippers.

Neither old nor young can do without these shoes. Comfortable, soft, warm house slippers give us comfort and relaxation after a busy day. You can knit slippers with your own hands. They are knitted on two needles in one piece and then sewn together. This work will not take much time.

Step-by-step work process

1. For work, prepare: yarn, knitting needles, threads, scissors, buttons.

2. Sole: cast on 26 stitches.

3. Row 1 - knit all stitches behind the back walls.

4. Row 2 and all even rows - knit all stitches behind the front walls.

5. Row 3 - knit stitches, add one loop at the beginning and end. Figure 5a: pick up a horizontal loop with a knitting needle, pull it out and knit it. Figure 5b: the next loop is knitted as desired: it can be done behind the back walls or behind the front ones. There are 28 loops on the knitting needle.

6. 5 - 14 rows - repeat rows 3 and 2. There are 38 loops on the needle

7. 15th and 16th rows - knit with facial loops.

8. Row 17 - knit with knit stitches, at the beginning and at the end of the row, knit 2 loops together with knit stitches. There are 36 loops on the knitting needle.

9. Rows 19 - 28 - repeat rows 17 and 18. There are 26 loops on the needle.

10. Up: continue knitting row 28: cast on 8 loops - these are the heel loops. There are 34 loops on the knitting needle.

11. 29 row and all odd rows - knit with facial loops.

At the beginning of the row, add 1 loop. There are 35 loops on the knitting needle.

Row 30 and all even rows - knit with knit stitches.

12. 31 - 39 rows - repeat rows 29 and 30. There are 40 loops on the knitting needle.

13. Row 40 - cast off 18 stitches and knit with knit stitches.

14. 41 row - knit with purl loops.

Row 42 - knit with knit stitches.

15. Row 43 - purl and cast on 18 stitches.

Row 44 - knit with knit stitches. There are 40 loops on the knitting needle.

16. 45 row - knit with facial loops, at the beginning of the row, knit 2 loops together with facial loops. There are 39 loops on the knitting needle.

Row 46 and all even rows - knit.

17. 47 - 55 rows - repeat rows 45 and 46. There are 34 loops on the needle.

18. Row 56 - bind off the loops.

19. The first canvas is ready.

20. Take a button and sew it on.

Slippers knitted using a wide variety of patterns (including two knitting needles) are an excellent alternative to indoor shoes for children and adults, as well as a touching, sincere, warm hand-made gift for loved ones.

Even the most inexperienced craftswomen, familiar only with the basics of knitting, can make this useful element of their home wardrobe; to do this, they just need to choose a suitable model with a description of the work and strictly follow the recommendations.

Knitted slippers must be not only beautiful and warm, but also comfortable to wear, otherwise they will not be able to fully please their owner.

The comfort of a knitted product largely depends on the yarn, so when choosing it you need to take into account some important nuances:

To make the product as warm as possible, it is important to pay attention to yarn composition. Experienced knitters recommend choosing natural wool and wool blend threads for socks and slippers. Products made from them are very warm, breathable, and also the most durable.
The second important parameter is yarn thickness. If you choose a thin thread, the slippers will not be warm; if the yarn is too thick, the product may not be very comfortable to wear. The best option is threads of medium thickness: 200-300 m / 100 g. You can also take thinner yarn, but in this case knit the product in 2-3 folds of thread.
If slippers are going to be knitted for a child, you should give preference to a special one. children's yarn, because it is hypoallergenic, has a safe composition and is very pleasant to the touch.
Choice product colors always remains up to the craftswoman, but if the slippers will be knitted from various leftover yarns, it is very important that they not only match in color, but also be approximately the same thickness and texture. If this simple rule is not followed, the knitted fabric may turn out uneven and sloppy.

What sole to choose (make) for slippers

The soles of slippers can be made of various materials. The simplest and most common option is a sole knitted from the same or denser yarn as the slippers.

For strength, many needlewomen add another thread to the main thread when knitting it.

If a more wear-resistant option is required, the sole can be made of felt or thick leather. Its shape is easiest to cut out using a suitable insole. The sole can be made separately and then tied or sewn to the finished product.

Knitting needles

To knit socks and slippers, craftswomen use special stocking needles, which are sold in the form of a set of 5 pieces. They differ in the material of manufacture (metal, wood, plastic) and diameter (marked with numbers).

The material from which the knitting needles are made is not fundamentally important, it is a matter of personal preference.

The number of knitting needles is selected depending on the nature of the product and the thickness of the selected threads. For knitting slippers and socks, it is recommended that the diameter of the knitting needles approximately coincides with the thickness of the thread; in this case, knitting will be as comfortable as possible, and the fabric will be dense, even and beautiful. For example, for yarn 250-300 m/100 g, knitting needles No. 2.5-3 are optimal.

Additional accessories for knitting slippers

In addition to yarn and knitting needles, when creating knitted shoes you may need:

knitting markers (special plastic hooks used to highlight stitches during calculations);
hook (with its help it is convenient to hide the “tails” of cut threads, as well as to tie the edges of finished products);
thick needle with a wide eye (for sewing products).

All of these knitting supplies can be purchased at craft stores along with yarn and knitting needles. Women's and children's slippers, knitted by hand, can be complemented with accessories that will make the item more interesting, beautiful and unique in its own way.

For this purpose use:

decorative buttons;
beads;
crocheted flowers;
bows and ribbons;
pompoms, etc.

Common abbreviations

Knitting (slippers on two needles): patterns, descriptions of work presented below contain generally accepted abbreviations:

Loops - p.;
front loop - l. P.;
purl loop - i. P.;
edge loops - edge;
row - r.

Simple slippers on two knitting needles

This simple model of slippers can be knitted on two knitting needles in literally a couple of hours; the proposed pattern is an ideal option for beginning needlewomen: it will help you “teach” your hand and will delight you with its original appearance. Calculations are given for foot size 38-39.

Necessary materials

Scroll:

Yarn (300m/100g) – 1 skein.
Knitting needles No. 3.
Knitting markers.
Needle for stitching.
Additional accessories.

Sequence of work

Performance:

Slippers with two knitting needles made of rectangle

This original model of slippers is reminiscent of oriental shoes in appearance, and it is very easy to knit it on two knitting needles, because while working you don’t even need to make any increases or decreases according to the pattern. The base is a rectangle knitted in garter stitch (all rows are performed only with knit stitches).

Such tracks made from sectionally dyed yarn look most impressive., but you can knit them from plain threads and from multi-colored leftovers.

To work you will need:

Yarn (250 m/100g) – 1 skein.
Knitting needles No. 3.
Needle.
Hook.

Sequence of work

Performance:

First of all, they perform calculations so as not to make a mistake with the size of the slippers. Measure the length of the foot, multiply by 2 - this is the required width of the rectangle. From the yarn you like, knit a test sample of 10 stitches, measure it and calculate the required number of loops for the resulting width.
Based on the resulting calculations, cast on the loops on the knitting needles, make a rectangle 12 cm high with garter stitch. Close the loops, use a hook to process the top in any convenient way - columns, picots or “shells”.
Fold the rectangle in half, form a toe by folding the edges of the product into a cone shape. Sew along the sole line.

Men's knitted moccasin slippers

Men's slippers, reminiscent of moccasins, are knitted on two needles according to the given pattern quite easily and quickly, but at the same time they look very original. The calculations given correspond to sizes 40-41. The entire product is made in simple garter stitch, that is, in all rows the loops are always knitted only with knit stitches.

To make them you will need:

Medium thickness yarn – 80 g.
Knitting needles No. 3.
Hook for decorative processing.

Sequence of work

Performance:

Slippers with two knitting needles without seam

The most comfortable for adults and children are socks and slippers knitted on two knitting needles using a seamless pattern: they fit snugly to the foot without causing discomfort when worn. Seamless slippers are also beneficial because they can be worn not only at home, but also worn under shoes in cold weather.

The master class presents calculations for foot sizes 36-38.

Prepare materials:

Yarn (250 m/100g) – 1 skein of main color, 50 g of finishing yarn in contrasting color;
Knitting needles No. 3.

Sequence of work

Performance:

The main yarn is cast on 47 sts on knitting needles. Rows 1-6 are performed with a standard elastic band (chrome, 1 sp, 1 st).
Find and mark the center (24th stitch) with a knitting marker. Continue working with the finishing thread: chrome, *1 sp, 1 lp, 1 sp, 1 st transferred to a knitting needle (do not knit, thread at work) * - then repeat from * to * to the center. A yarn over is made in front of the marked loop, the central one is removed, another yarn over is made, and the row is completed by analogy with the first half. The wrong side must be knitted the way the pattern looks, the removed loops are also transferred (not knitted), the thread is left before work. Yarn overs are also made before and after the central loop, while the yarn overs from the previous knit row are knitted with a crossed knit stitch.
Switch to the main yarn again: chrome, * 1 i.p., 1 l.p. move (thread at work), 1 and. p., 1 l. p. * - repeat from * to * to the center. The central loop is knitted, and yarn overs are also made before and after it. Knit to the end of the row according to the same pattern. The purl row is performed in the same way as the previous one.
According to the described principle, 14 subsequent rows are repeated, alternating the main and finishing threads.
Proceed to knitting the sole: count off the middle 15 stitches and mark with markers. Knit the main yarn with an elastic band according to the pattern up to the central 15 sts. They are also knitted with an elastic band, the outermost loop and the first of the side row are knitted at the same time. The work is unfolding. Knit 14 stitches according to the pattern, the outermost loop is knitted simultaneously with the first from the side row, then the work needs to be unfolded again. Continue knitting according to this principle, in the end only 15 stitches should remain on the knitting needles.
Heel. On both sides of the central 15 sts, 16 sts are picked up from the edge stitches. The heel is formed according to the same principle as the sole, i.e. you need to knit two loops at the same time from each edge until only 15 stitches remain on the knitting needles again. Close the loops. Using a hook, hide the tails of the cut threads, decorate as desired.

Children's slippers with two spokes

In winter and autumn, it is especially important to ensure that children’s feet are always warm – both at home and outside. Foot slippers will ideally cope with this task, and besides, they can be knitted according to the given pattern on two knitting needles literally in one evening. Calculations are given for slippers for a child up to one year.

For knitting you will need:

Children's wool or acrylic yarn - 60 g of the main color, 30 g of another color for finishing.
Knitting needles No. 3.
Hook.

Sequence of work

Performance:

You can take any of the above patterns for knitting slippers on two knitting needles as the basis for your work, and vary the size depending on your needs, adding or subtracting the number of loops and rows.

The same can be said about the design of knitted slippers: color solutions, variations on patterns and decor have no restrictions. Knitting is a creative process that brings not only practical benefits, but also pleasure.

Video: knitting, slippers on two needles patterns

How to knit slippers without seams, video tutorial:

Traces on two knitting needles, see in the video clip:

Knitted slippers are universal footwear for the home that are pleasant to wear on your feet. These slippers are warm, comfortable and very cozy. New models of knitted slippers delight with their simplicity and accessibility. You can knit this cute accessory yourself by choosing high-quality yarn and an original design.

There are knitted slippers with and without soles, seamless slippers, sock slippers, boots, moccasins and even sandals. Next, we will tell you how to knit cozy slippers and demonstrate several patterns and master classes.

Handmade slippers are a real gift for your feet, especially if you walk a lot during the day. Knitted items always remain in fashion: they are exclusive, beautiful, and most importantly - right for you, in size and style. Let's take a closer look at knitted slippers: diagrams and descriptions, simple and beautiful patterns are knitted by craftswomen all over the world, and you can do it too.

This pattern is knitted easily and quickly using regular garter stitch. Unlike slippers, these slippers are raised up to the ankles, so they warm the feet better.

You can make your own homemade slippers to tieseamless on 5 knitting needles. This method is very similar to the process of knitting socks; pictures and step-by-step instructions will help you cope with the main stages of the work.

Prepare 5 knitting needles, thickness 4 mm.
Medium thickness yarn.
The knitting density will be 10x10.

Instructions for knitting seamless slippers

Cast on 32 stitches on the needles.
We knit the first row with knit stitches.
We knit the second row like this: 10 knit stitches, one purl stitch, 10 knit stitches, one purl stitch, 10 knit stitches.
We knit the third row as the knitting looks like.
The fourth row is similar to the second.
From the 16th row we begin to form the heel: Knit 10, purl one, knit 10, then purl 2 together (for the central part of the heel).
In the 16th row we knit one side loop and turn the work.
In the 17th row we remove the first loop, we knit 10 loops with the front ones, remove the twelfth loop of the central part of the heel, and knit the first side part with the front ones. We transfer the removed loop to the knitted one.
We repeat knitting rows 16 and 17, adding two side parts of the heel. In the purl rows, the last loop of the central part of the heel and the first side one - knit together purlwise.
In front rows, remove the last loop of the central part without knitting, and knit the first loop of the side part. Transfer the removed loop to the knitted one.
On the knitting needle - 12 loops of the central part of the heel. Next, we cast on 10 loops along the edge of the side part.
Turning the work over to the other side, we knit the loops of the side and central parts. We need to cast on 10 more stitches along the edge on the other side of the heel. Thus, on three knitting needles we get 32 loops.
We knit with facial stitches. We knit purl rows like this: 10 knit, 1 purl, 10 knit, 1 purl, 10 knit.
We knit the front rows with the front rows.
We continue knitting to the bone on the leg, at the end of the front row we cast on 8 loops, closing the knitting in a circle.
Distributing the stitches onto 4 needles, knit in the round using garter stitch until the little finger is covered.
To knit the sock of the slippers, we switch to knit stitches.

On the first spoke– knit one, then remove one knit stitch, knit the knit stitch again and transfer the removed loop to it. Next we knit with facial stitches.
On the second spoke– all knit stitches until 3 loops remain (we knit 2 of them together with knit stitches, one with knit stitches).
Loops on the third needle we knit as in the first one.
On the fourth- like the second one.

We knit a sock; to do this, you must first cut the loops through the row, and then in each row until there are 2 loops left on each knitting needle. All loops must be connected. And then - fold the knitting needles parallel to each other and remove two knitting needles together. The last loop is pulled inward and secured with a knot.
If desired, make a pompom for the slippers.

Slippers of this model fit tightly on the foot, reminiscent of footprints or thick socks.

Knitted slippers with clasps They look very stylish on your feet – you can even dance in such cute ballet shoes!

Beautiful and neat slippers-boots will decorate and warm your feet.

Knitted boot– another type of cozy slippers.

Knitted house slippers are made both with and without soles.

Knitted slippers for children are often called booties. They are worn by children on walks and at home.

Men's slippers are also in trend, it’s just that not all men admit that they like this accessory.

A short master class on knitting slippers with knitting needles will help you understand all the nuances of creating this warm accessory with your own hands.

If you want to learn how to knit slippers for beginners step by step, a video on two knitting needles will explain the process to you in every detail.

Before you start working on slippers, select the material and tools.

Yarn. What do you need to know?

Varieties of yarn

Natural

cotton

Pros: yarn, easy to work with; wide range of colors
Cons: long drying time after washing; If the washing temperature is incorrect, the product may “shrink”

Pros: yarn, easy to work with; quick drying after washing
Cons: the color range is limited to natural shades; If the washing temperature is incorrect, the product may “shrink”

wool

Pros: the yarn is warm; large selection of colors and types
Disadvantages: the yarn is very finicky in subsequent care; if the washing temperature is incorrect, the product may “shrink”; if dried/ironed incorrectly, it may stretch; often irritates the skin and can cause allergic reactions (especially in children); wears out quickly with active wear

Mixed

Combines the best properties of natural and artificial materials

Artificial

polyester
acrylic

Pros: good selection of colors; the yarn is easy to work with; good heat capacity (especially acrylic)
Cons: yarn can become electrified; characterized by poor hygroscopicity; during wear, so-called “coils” may appear on the product; some note the characteristic “creaking” of the yarn

Knitting needles and crochet hook. How to choose the tool number?

For threads less than 4 mm thick, the needle thickness should be 1 mm larger. For example, the thickness of the yarn in the figure is 1 mm, the knitting needles are 2 mm
For threads with a thickness of more than 4 mm, the thickness of the knitting needles should be 1.5-2 mm larger. For 3mm thick yarn, the best working needles are 6mm needles.

If you are going to knit a voluminous pattern with braids (plaits), the size of the knitting needles should be another 0.5 mm larger
An openwork pattern or a pattern with dropped loops requires knitting needles 0.5 mm smaller than expected based on the thickness of the yarn

A small reminder on choosing the thickness of yarn and knitting needles is presented in the infographic below

The hook is selected by analogy with knitting needles

Important: the tool number corresponds to its thickness. For example, No. 2.5 means that the thickness of the knitting needles/hook is 2.5 mm

Basic knitting techniques for knitting needles

The simplest set of knitting stitches

Advice. If you are working with thin yarn, it is better to make a cast on 2 knitting needles, so the edge will be more elastic

To calculate the length of the free end of the thread for a set of loops in centimeters, multiply the number of loops in the description by 2
Make a loop in any way convenient for you and put it on knitting needles folded together. Tighten the loop a little
Thread the threads around the thumb and index fingers of your left hand. The free end of the thread should be on the thumb, the thread from the ball should be on the index finger. Secure the threads by pressing them against your palm with your free fingers.
Hold the loop on the knitting needles with the index finger of your right hand

Hook the thread lying around your thumb with a knitting needle (movement 1 with the red dotted line in the diagram)
Guide the knitting needle with the thread hooked on the left side of the index finger (movement 2 by the dotted line in the diagram)
Make a knitting movement from top to bottom → from right to left → under the thread on the left of your thumb. Then slip the yarn off your thumb, forming a loop on the needle (movement 3 with the dotted line in the diagram). Cast on the required number of stitches

How to knit a knit stitch

How to knit a purl loop

How to knit a yarn over

How to knit two stitches together with a knit stitch slanted to the right

How to knit two stitches together with a knit stitch slanting to the left

How to close loops

Basic crochet techniques

The first loop of the air chain

First loop and air chain

Single crochet, half double crochet, double crochet

Elastic band made of posts, ring, connecting post

The basics are covered, let's start knitting

Beautiful knitted slippers, description

Trendy patchwork style slippers will definitely please and warm the people you love. The knitting technique is very simple and even beginner knitters can do it.

In addition, the pattern “Squares knitted diagonally” is suitable not only for knitting slippers, but also for making blankets or decorative pillows

A short introduction before work

Determine your foot length. The photo below will tell you how to do this correctly.

The diagonal of the base square should be equal to ½ the length of the foot. For example, for a foot with shoe size 37 and a foot length of 22.6-23.3 cm, you will need a square with a diagonal of 11.3-11.7 cm and a side of 8-8.5 cm

Advice. Before you start working directly on the slippers, knit a test square from the selected yarn and calculate the loops taking into account the performance characteristics of the yarn, the knitting needles you have chosen, and your knitting style

The description below assumes the finished product will fit a women's average size (37-38 or M)

Required materials and tools:

yarn of your choice (for women's and men's slippers - 300-400 g, for children's slippers - 150-200 g)
knitting needles 2.25 (correspond to yarn characteristics)

Basic knitting - garter

Knit and purl rows are knitted with knit stitches

Knitting density: 46 loops = 10 cm

How to knit square 1 and square 2. Design of the toe/toe of the product

Cast on 37 stitches on the knitting needles
1st row and all odd numbers: knit stitches
2nd row: 1 edge loop, 16 knit stitches, 3 knit stitches together (slip 1 of the three loops without knitting, knit the 2nd and 3rd stitches together, put the removed loop on the knitted one), 16 knit stitches, 1 edge loop . After knitting a row, there are 35 stitches left on the knitting needle.
3rd row: 1 edge, 15 knit, 3 stitches together, knit, 15, 1 edge. After knitting a row on a knitting needle - 33 loops
5th row: 1 edge stitch, 14 knit stitches, 3 knit stitches together, 14 knit stitches, 1 edge stitch. After knitting a row on a knitting needle - 31 loops
Knit, decreasing three loops in each even row until there are 9 loops left on the knitting needles

Take a control measurement of the connected element and make sure that the diagonal of the square is equal to ½ the length of the foot of the future owner of the slippers

You have 9 loops of square 1 left on your knitting needle. They will become the basis for square 2
1st row: 9 square stitches 1, knit, add 14 stitches along the edge row of the left side of the square. On the knitting needle: 23 loops
Row 2: Knit 14 stitches and extend the row with 14 stitches along the other edge of the square. You have 37 loops on your knitting needle

Knit by analogy with square 1
All odd rows: knit

When the last loop is closed, you will have a kind of “boat” that will form the toe of the future sneaker

How to knit square 3 and square 4. Design of the side parts of the product

Cast on 37 knit stitches along the edge row of one side of the sock
Continue knitting according to the pattern
All odd rows: knit
All even: knit 3 center stitches together

When square 3 is completed, knit symmetrical square 4

How to knit square 5 and square 6. Heel design

Continue working according to the established scheme
Cast on 37 knit stitches along edge sides of squares (3 and 4)
All odd rows: knit stitches
All even: knit 3 center stitches together
Continue knitting until there are 9 stitches left on the needle.
By analogy with the design of the toe of the product, design the last square of the heel

All that remains is to create an armhole for the ankle and the slippers are ready. The knitting algorithm for the second slipper is similar to the first
The armhole is designed in any way convenient for you

using stocking needles
hook

Knitted slippers for beginners

If the previous slippers seemed too complicated due to the elements that are tied to each other, try knitting the model below

All you need to do is knit 8 squares with a side of 9 cm and a diagonal of 12.7 (foot length 25 cm, size 39-40)
Basic knitting - garter
Once all the squares are ready, arrange them according to the diagram and sew them together

Wonderful and cozy house shoes are ready

Men's knitted slippers, diagram

This model is distinguished by its ease of execution, since there is no “toe” decrease in stitches typical for slippers, which scares off inexperienced knitters.
These slippers will warm both men's feet and little children's feet.

Materials and tools:

Thick yarn with density (110 m/50 g) - 200 g
Knitting needles (according to yarn) - #4.5

Knitting density: 16 loops = 10 cm
Algorithm for knitting slippers, size 43 (27 cm along the length of the foot)

Upper cuff

Cast on 55 stitches on the knitting needles
Work the first nine rows in garter stitch.
10th row: purl all stitches

middle part

Select the central knitting loop (28th in a row). The loop can be highlighted with a pin, a special marker ring, or bright thread
11th row: edge loop, 26 knit stitches, yarn over, center loop knitted over, yarn over, 26 knit stitches, edge loop. There are 57 loops on the knitting needle
Row 12 and all subsequent even rows up to row 38: purl stitches
13th and all subsequent odd rows up to the 37th row: edge loop, knit stitch section, yarn over, central loop is knitted, yarn over, knit stitch section, edge loop
37th row: edge loop, 40 knit stitches, yarn over, center knit loop, yarn over, 40 knit stitches, edge loop. On knitting needles - 85 loops

Bottom edge

39th row: all front (edge, 83 loops, edge)
Row 40: knit all
Row 41: knit all
Row 42: knit all

Sole

43rd row: edge loop, 2 knit loops together with a slant to the left, 37 knit loops, 2 loops together with a slant to the right, central knit, 2 loops together with a slant to the right, 37 knit loops, 2 loops together with a slant to the left, edge loop. On knitting needles - 81 loops
Row 44 and all even rows: purl stitches
45th row: edge loop, 2 knit loops together with a slant to the left, 35 knit loops, 2 loops together with a slant to the right, central knit, 2 loops together with a slant to the right, 35 knit loops, 2 loops together with a slant to the left, edge loop. On the knitting needles - 77 loops
47th row: edge loop, 2 knit loops together with a slant to the left, 33 knit loops, 2 loops together with a slant to the right, central knit, 2 loops together with a slant to the right, 33 knit loops, 2 loops together with a slant to the left, edge loop. On knitting needles - 73 loops
Close the loops.

The second half pair is knitted similarly. Sew along the edge and sole.

Video: How to crochet men's slippers?

Women's knitted slippers, diagram

Delicate and very elegant slippers, similar to elegant ballet shoes

Materials and tools:

Yarn - 100-150 g
Knitting needles (according to yarn) - #2.5

Basic knitting: knit (odd rows are knitted with knit stitches, even rows are knitted with purl stitches)
Additional knitting: garter stitch (all rows are knitted with knit stitches)

Knitting density: 20 loops = 10 cm

Algorithm for knitting slippers, size 37 (23 cm along the length of the foot)

Cast on 35 stitches on the knitting needles, continue working, focusing on the diagram

1st row: edge loop, 33 knit stitches, edge loop
2nd row: edge loop, 32 knit stitches, add one loop from the broach, 1 knit stitch, edge loop
3rd and all subsequent rows up to 17th: knit stitches
4th row: edge loop, 33 knit stitches, add one loop from the broach, 1 knit stitch, edge loop. There are 37 loops on the knitting needle
6th row: knit by analogy with the 4th.

Repeat adding stitches until there are 44 stitches on the needles.

Cast off 20 stitches on straight side B (see diagram), knit the remaining stitches in stockinette stitch (1 row)

On side B, cast on 20 stitches again. Knit 18 rows in garter stitch, removing 1 stitch from side A at the beginning of each knit stitch (knit 2 stitches 1 knit). Repeat decrease 9 times

From side B, cast off 8 loops. Proceed to design the sole of the half-pair (you can use a thread of a darker color)

The sole is knitted in garter stitch. In each even row, increase 1 knit stitch on both sides of the row. Repeat the addition 8 times. The number of loops will increase by 16.

Then decrease each even row by 1 stitch on each side of the row. Repeat decreasing 8 times until you return to the original number of stitches.

Close the loops. Sew the seams.

How to knit a rose:

Cast on 50 stitches on knitting needles
Knit 6 rows in stockinette stitch
Close the loops
Twist the knitted ribbon in the shape of a flower, secure with threads
Sew a rosette to a slipper

You can decorate your slippers with decorative bows, buttons, sequins, etc.

The second half pair is knitted in mirror symmetry

Children's knitted slippers, diagram

By analogy with the previous pattern, you can knit wonderful children's slippers

And another great idea for simple children's slippers, knitted with your own hands

To make these slippers you will need two rectangles:

one for the sole. Accordingly, the width of this element is equal to the width of the foot, and the length is equal to the length of the foot. Don't forget the seam allowances!
the second is the top of the sneaker. The width should match the width of the rectangle-sole, the length should be 2 times the length of the first part

Sew the blank rectangles according to the pattern and decorate as you wish

Important: slippers are sewn in a mirror image!

Knitted slippers with felt soles, diagram

The proposed option will not require much time and effort, but will provide warmth and comfort.

All you need:

felt sole
yarn
knitting needles and needle and threads for stitching

Knit a long piece of fabric into a scarf. The length and width of the fabric depend on the size of the insole

When the fabric is ready, sew it to the insole, following the diagram for children's slippers presented above and the photo below

Knitted slippers-socks, diagram

Sock slippers, known as Japanese knitted slippers, are very comfortable and, like everything Japanese, extremely easy to make.

Video: Knitting Japanese slippers and socks with knitting needles

Crocheted slippers-boots, pattern

A detailed master class on crocheting slippers-boots is presented in the video below

Video: Master class on crocheting slippers-boots

Video “Knitted slippers without seams. Knitted slippers" will reveal the secrets of mastery

Video: Knitted slippers without seams. Knitted slippers

You can knit soft and warm house slippers yourself. Both crocheting slippers and knitting are easy. It will take a little time: you can sit on the sofa with handicrafts while watching your favorite TV series, and by the end of it you will already have a ready-made new thing.

Options for knitted slippers

The simplest option is to knit slippers with two knitting needles, and you will need to know how to knit a garter stitch fabric and a 1 x 1 elastic band. If you want to complicate the work, you can choose other options:

patterned slippers;
square slippers;
"footprints";
"flip flops" and other options.

You will choose the color and knitting pattern yourself; we will only give the most detailed instructions for knitting slippers for beginners.

To work you will need yarn and knitting needles. Their diameter will depend on the thickness of the yarn. If you take medium thickness yarn, size 4 knitting needles are better.

You shouldn’t take yarn that is too thin, but thick slippers are unlikely to make your feet comfortable, except in severe winter.

How to knit slippers with your own hands

Cast on 34 stitches and knit the first row. In the second row after the edge knit 10 stitches, knit 1, knit 10, purl 1, at the end knit 10 and the edge.

From the 3rd to the 34th rows, knit according to the pattern: all odd rows are knitted, even rows are like the 2nd row.

In the 35th row, make an increase, knit 11 loops, then knit 2, 8 from 1 loop, 2, 11 from 1 loop and an edge stitch. 36th row: knit 10, purl 1, knit 12, purl 1, knit 10, edge. The next row is all knits.

We knit the 38th row and all even rows up to the 63rd row like the 36th row, the odd ones - with facial loops.

Then we knit 9 rows with a 1 x 1 elastic band (knit 1, purl 1), and do not close the loops.

All that remains is to knit the second slipper and assemble both. First you need to pull the remaining tail through the open loops of the last row, pull it off, and secure the thread. Sew the part knitted with an elastic band and another 8 rows (this will be the toe).

To form the heel, you need to find the middle of the first row from which knitting began. Starting from here, you need to sew the middle part of the heel with a neat seam. Fasten the thread and decorate the slippers: you can do embroidery with bright threads or decorate with a pom-pom, or crochet a voluminous flower.

Knitting slippers with felt soles is done in exactly the same way: after finishing the work, sew the sole to the finished slipper, and the place where it is sewn can be hidden under a decorative seam.

Slippers with 5 spokes without seams

Such slippers can also be knitted by an inexperienced needlewoman. Prepare 5 size 4 needles and medium weight yarn.

Pattern and description for knitting slippers:

Cast on 32 stitches on the knitting needles and knit the first row with knit stitches as in the previous case.
We knit the second row like this: after the edges, knit 10, purl 1, knit 10, purl 1, knit 10.
3rd and 4th rows - according to the drawing and so on until the 15th row.

Now let's form the heel. To do this, we knit the 15th row like this: knit 10. (side side), purl 1, knit 10, purl 2 together, turn work. In the 16th row you need to knit according to the pattern, then attach 1 side loop and turn the work.

In the 17th row, only the central part is knitted (12 loops) with the side loops attached to it: k10, remove 1 and throw it over the side loop, which is knitted with the front one, in the next rows repeat the 16th and 17th rows until there are 12 knit stitches left on the needle.

Cast on 10 loops along the side edge, unfold the knitting, knit the cast-on and center loops, and again cast on 10 loops along the side. Check yourself: there should be 32 loops on the knitting needles, as at the beginning of knitting.

We knit until the toe is formed according to the pattern:

Facial rows - facial loops;
Purl – knit 10, purl 1, knit 10, purl 1, knit 10.

So you need to continue knitting, trying it on your leg: when the knitting covers the bone of the big toe, transfer the work to 4 knitting needles, distributing the loops evenly.

Before the little toe disappears, knit in garter stitch, then close the toe in stocking stitch:

On the first knitting needle we knit: knit 1, slip 1, knit 1, slip the slipped loop onto the knitted one. We knit the remaining loops with facial stitches.
On the second knitting needle there are 2 persons. together, 1 persons., 2 persons. together, 1 persons. etc.
We knit the loops of the third knitting needle as on the first.
The fourth is all facial.

You need to continue decreasing until there are two loops left on the knitting needles. We connect them, knit 2 together. We pull the thread through the last loop and hide it inside.

As you can see, the work is not difficult, and rather than admiring photos of knitted slippers on the Internet, it is better to try knitting them yourself, and then warm your feet in beautiful house shoes.