A scarf is an indispensable fashion accessory, especially in the autumn-winter season. Modern scarves can not only become a stylish addition to your look, keep you warm in the cold, but also transform into other wardrobe items - a jacket, hood or vest. Knitting a transformable scarf with your own hands is quite simple; even novice knitters can master knitting. And as a result, your wardrobe will be supplemented with an original and multifunctional item.

Transformable scarf knitting diagrams and description

You can knit this transformable scarf in widths of 37, 42, 53 and 66 centimeters, in length - one hundred and fifty cm, for chest girths of 80-94, 99-104, 109-114 and 119-127 cm.

For knitting, you will need yarn, for example, “Zaol Canon” made of merino wool 87 meters by 50 grams, as well as circular knitting needles number 5.5 (sixty and eighty centimeters), a pair of buttons with a diameter of two and a half centimeters.

In terms of density, the knitting of the proposed model of a transformable scarf is sixteen loops and twenty-two rows with a pearl pattern = ten by ten centimeters; 36 (36, 52, 52) stitches in relief - according to the diagram = 14 (14, 20, 20) centimeters wide.

A two-by-two rib (multiple of four stitches) is knitted as follows: first row (RS): knit three, *purl two, knit two; repeat from * to final five chains, purl two, knit three. Next row - (IS): p3, * k2, p2, repeat from * to final five links, k2, p3. Next comes a repeat of the first and second rows.

Knitting pattern for a pearl pattern (the number of stitches should be odd). Next comes knitting the installation row (IS): * k1, p1, repeat from * to the final loop, k1. First r. (IS) and second r. (IS):* P1, k1, repeat from * to final stitch, P1. Third and fourth rows: *K1, purl, repeat from * to final stitch, k1. To form an ornament, knit from the first to the fourth rows without repeating the installation row.

The knitting pattern for a relief pattern with symbols is presented in the article.

So, after all the preparatory work, you can start knitting a transformable scarf with your own hands.

At the first stage, you need to make a set of the following number of loops, according to the sizes: 72, 80, 104 or 124. After this, knit an elastic band two by two by thirty r. The knitting ends with a purl p. – thirteen cm from the inlaid edge (NK). Then, knit one p. persons loops. Next r. (IS): K5, place a marker and knit the setting p. pearl pattern on 27, 35, 43, 63 p., place a marker, knitting the installation p. with a convex pattern (relief) on 36, 36, 52, 52 p.: knit twelve links before rapport, according to the diagram once, then repeat the repeat of eight buttonholes 2 (2, 4, 4) times. Now knit eight stitches after the repeat once, place a marker, k4.

Scheme of work with the following row: 4 persons. (the edge is made on the basis of garter stitch), skipping the marker, knitting the first p. with a convex pattern according to the pattern for 36, (36.52, 52) p., skipping the marker, knitting the first row. pearl ornament on 27 (35, 43, 63) sts, omit marker, purl 1. for purl smooth, 4 persons. (the edge is made using garter stitch). Please note that you will need to knit one stitch at the edge of the placket stitch at the end of the knit and beginning of the purl rows. satin stitch

Further work on the transformable scarf continues by knitting patterns. You need to knit 2 p. according to the scheme once, then repeat from the third to the eighteenth pp. sixteen times, knit again 19-27 = 268 r according to the diagram, taking into account the installation r. Next, purl 1 is knitted. p IP, length one hundred and thirty-seven centimeters from NK. Now there are two r. 2X2 elastic bands with purl ending. near.

At the next stage, a row with button holes (BH) is created for the transformable scarf. Knit to the final five stitches, yarn over 2 stitches, purl together, k3. Knit an elastic band for fifteen centimeters (the beginning and end are purl rows). Repeat p. with a hole for a button in the next front p. Loan knitting elastic for eleven rubles. with the beginning and end of the purl. R. – the length of the transformer scarf is approximately one hundred and fifty centimeters with NK. The last step is to close all the buttonholes in the same way as for faces. knitting.

In order to finish a transformable scarf, you must first steam it. To do this, straighten it relative to size and secure the ends of the threads. Fold the product in half. Here you need to fold the cast-on and the edge with closed loops. Now you should put the edge with the holes for the buttons on the other edge of the elastic, mark the areas where they will be fixed and sew.

This completes the work on the transformable scarf.

Scarf - transformable with sleeves

How to wear a convertible scarf with sleeves

Exactly the same scarf in a beautiful gray shade is a delicate, knitted fabric. The transformable scarf, thanks to its plasticity and softness, creates the perfect silhouette. This wonderful item will be a beautiful addition to your evening dress during formal receptions or visits.

How to knit such a transformable scarf with knitting needles, diagrams and descriptions

Winter accessories not only help to diversify our wardrobe, but are also a stylish and practical item of clothing. A transformable knitted scarf is perfect for this purpose! It is beautiful, stylish, and at the same time practical, because such a product can be worn in different ways. Such a stylish knitted accessory can easily be turned into a snood, a dress, a vest, a bonnet... there are a lot of options! It goes harmoniously not only with coats and jackets, but also with dresses, sweaters, and tunics. Our master class will tell you about some of the features of these products, and diagrams and descriptions will help you knit an original item with your own hands in just a couple of days!

Japanese popular transformable scarf knitted

This wonderful transformable scarf, knitted from “grass”, is quite multifunctional: it can serve you as a dress, snood, cape or even a hooded hat! Of course, you can always order it from China or Japan, purchasing the product at exorbitant prices, but why? Knitting it with knitting needles will not be difficult, even if you have recently taken up needlework.

We will need:

• yarn (the original transformable scarf is made of “grass”, 100% polyamide, 100 m per 50 g) – 6 skeins;
• circular sp. No. 7;
• hook No. 2.

Description

We cast on 100 sts on circular knitting needles, then knit stitches in the round. The product will be of any length, it all depends on your parameters and preferences. We finish it by crocheting the edges of the work - 2 rows with a single crochet. This DIY knitted snood has excellent stretch, so it can be used as a bonnet, dress, cape, snood or vest.

How to wear a transformable scarf: video master class

Knitted transformable scarf with knitting needles

In purl rows, sts should be knitted according to a given pattern, yarnovers should be purled. We start with the edge stitch and loops before the repeat, repeat the repeat, finish the stitch after the repeat and the edge stitch, repeat the designated rows.

Description

We cast on 40 stitches for the sleeve, now we need to knit 3 rows for the placket using garter stitch, then continue with a pattern of leaves and zigzags. After 15 centimes. = 30 rows from the bar we add 1 p. for sleeve bevels on both sides, in every eighth row 3 x 1 p., in every fourth - 10 x 1 p. and in every second row. 8 x 1. When the transformable scarf is ready, do not forget to close the loops, moisten the finished product and let it dry in a horizontal position.

Transformable scarf with voluminous braids

Description

Before starting knitting, be sure to calculate the loops; in our case, their number will be 105 stitches. We distribute the stitches cast on the narrow side of the future scarf as follows: 1 edge. p., 5 p. garter stitch, 2 p. purl. satin stitch, braid of 24 stitches, then 2 stitches. purl satin stitch, 37 stitches. garter stitch (middle part), 2 stitches. knit purl satin stitch, now again a braid of 24 stitches, 2 stitches. purl satin stitch, now 5 stitches in garter stitch and 1 edge. P..

The number of stitches in the middle part of the panel depends on the total number of stitches cast on in accordance with our preliminary calculations, and therefore it can vary: if we need to cast on not 105 stitches, but by 100 stitches, then in the middle part there will be not 37 stitches ., and 32 p. (37 – 5 = 32). Consequently, if we have cast more than 105 loops, then the excess ones are again added to the average 37 loops.
It is also worth remembering that the edge pet. It is better to knit with knit stitches, this will make the edge of the scarf neater, more ribbed and protect it from rapid stretching and deformation.
The main decoration of this snood is the original embossed aran braids, to create which you need to move 3 stitches at a time. left or right according to the diagram using an auxiliary knitting needle.

We will be glad if our master class today will help you knit an original transformer with your own hands. We wish you smooth loops!

The attributes of the winter season are not only diverse and multifaceted clothing, but also fashionable, comfortable and at the same time an integral part of a wardrobe item. A hand-knitted transformable scarf will come in very handy in winter. This fashionable knitted attribute can be used as a cape or vest

The simplest model

The transformable scarf is crocheted. In its own way, this unique item, the so-called herbal, is infinitely functional: it can be used as a dress, snood, cape or even as a hooded hat. You can take the easy route and order it online, but it will cost several times more. But both a beginner and an experienced needlewoman can create this mini-masterpiece with her own hands.

Necessary materials:

1. Six skeins of yarn.
2. Circular knitting needles No. 7.
3. Hook No. 2.

Operating procedure:

Knitting is finished, you can try it on. This unique knitted snood, made with your own hands, stretches well, is therefore easy to use and can become any item of clothing - from a cape to a dress.

Option to use sewing knitting needles

It perfectly combines several types of clothing: a vest, a snood and a hood. Such transformable scarves are suitable for the autumn period, but they are usually worn in cool winters. Anyone can knit such a practical and interesting thing, because it is very simple - you just need to choose the yarn and follow the pattern.

Necessary materials:

1. Ten skeins of yarn (composition: 70% wool, 25% acrylic, 5% polyamide).
2. Knitting needles No. 3.5 (for braids) and No. 4.
3. Markers.
4. Markers or pointers.
5. Hook No. 3.5.

Once all the materials are prepared, you can proceed to manufacturing. To do this, follow the instructions.

The sample must be knitted with braid patterns (so-called arans). This kind of intersection transforms a thing, filling it with dimensions, thereby giving it massiveness. You need to cast on 100 loops to knit a scarf of the required size according to the given formula.

A transformable scarf, knitted with your own hands, in the finished version will be approximately the following dimensions: 40 centimeters wide and 140-150 centimeters long. Loop markers are needed to mark the outermost loops in braids. You need to thread them when tying the arans.

Next, you need to continue according to the formula until the sample reaches the required length. When finished, the transformable scarf will need to be slightly moistened, then laid out on a flat surface and allowed to dry completely. Then crochet the sample along the front side with single crochets in each subsequent loop.

Now you need to sew the edges. After this, everything is connected into a common circle. We fold the transformable scarf into a figure eight and try it on, lowering one loop to the waist area, and the second one needs to be smoothed out on the shoulders. By adding a little of your ideas and imagination, you can create a vest. To do this, sew the back lower part of the upper loops located on the shoulders with the upper part of the lower loops located on the back.

.

Knitting a scarf-blouse

Unusual, chic, and also quite insulated - these are just a small part of the advantages of such a necessary and convenient attribute. Following the scheme, any novice master can create such a masterpiece.

Necessary materials:

1. Ten skeins of yarn (35% wool, 20% mohair, 23% merino, 10% angora, 12% polyamide.
2. Knitting needles number 6.

We knit in garter stitch: knit and purl rows must be knitted with knit stitches.

Ornaments of leaves and zigzags according to the given pattern.

In the purl rows, the loops will need to be knitted according to the pattern, and the capes will need to be made purl. You should start with the edge loop and the loops located before the repeat, duplicate the repeat, finish the loop after the repeat and the edge loop, repeat the indicated rows.

Procedure:

1. Cast on 40 stitches for the sleeve part, then knit three rows for the placket in garter stitch, then continue with a pattern of leaves and zigzags.
2. After 25 centimeters (this is thirty rows) from the bar, add sleeves for bevels on both sides of one loop, in the next eighth row - three of one loop, in every fourth - ten of one loop, and in every second row eight of one loop.

When the transformable scarf is ready, do not forget to lightly moisten the finished sample. Then you can spread it on a flat surface and wait until it dries completely.

Option with ornaments

Fluffy, cuddly and versatile. This attribute of the most delicate blue shade (or another of your choice), made with your own hands, fits elegantly into your wardrobe. It is suitable for wearing during cool and rainy months.

Materials:

1. Six skeins of yarn (50% angora and 50% acrylic).
2. Knitting needles 34.

The completed sample will approximately be 190 centimeters long and 45 centimeters wide.

Knitting sequence:

The main inlay of the snood is a kind of massive braid-arana; to create them you will need to move three loops to the left, or to the right, according to the diagram. Additional knitting needles are used.

There are several ways to create a transformable scarf with knitting needles. Schemes and descriptions can be chosen according to your skills. The abundance of schemes and methods allows even a beginner to create a product. Having mastered the technique, they move on to more complex homemade things. For example, they are trying to make a transformable sweater or a scarf-vest with knitting needles.

Attention, TODAY only!

Scarves that transform into other items of clothing are still at the peak of popularity. Now, in addition to bulky warm products, you can find scarves made from thin summer yarn, angora, mohair and wool. In addition, the range of possible ways to decorate such wardrobe items has expanded: fur, pockets, sleeves, buttons and many other elements.

Considering the ease of execution, knitting a transformable scarf with knitting needles can be done by knitters with any experience. The production of almost all such products is based on a smooth canvas with a simple pattern.

Scarf knitted with a pipe

How to knit? Schemes and descriptions are given below. This is the simplest product made from voluminous scarves; it is extremely easy to create. The photo below shows a tube scarf, for the manufacture of which we used very (3-50 m/100 grams) and knitting needles number 7 (you can use thicker ones). An elementary stockinette stitch was chosen as a pattern.

To knit such a transformable scarf with knitting needles, diagrams and descriptions are practically not needed. The knitting process begins with a set of loops (their number is determined when calculating the loops using a pre-knitted pattern), then they are closed into a ring and the fabric is knitted on circular knitting needles to the required height (about 35-40 cm). If the craftswoman prefers to use straight classic knitting needles, then the pipe is knitted in the form of a rectangle and then sewn on the side. The principle of stitching knitted fabrics is shown in the figure below.

This technique is called a knitted seam connection.

The edges of the product do not have to be equipped with an elastic band or other binding; it is allowed to preserve their natural curled state. It is very comfortable to wear such a product - it is warm, and the hanging edges of the scarf do not interfere. This model also allows you to put it on your head like a hat.

Scarf-kerchief

The triangular shape of this scarf allows it to be worn as a classic head scarf, bolero, pareo or cape. The number of variations is limited only by the imagination of the owner of such a product.

From the photographs below, it’s easy to guess how to knit a transformable scarf with knitting needles.

There are several ways:

• Knitting from the corner. Such a fabric begins with one or three loops and is expanded by uniformly adding loops as the work progresses. This should be done on every front row. Thus, the expansion occurs at an angle of 45 degrees, resulting in a triangle with a right angle.
• Knitting from a wide edge. This method is not as convenient as the previous one, but it also deserves attention. When choosing this path, you should cast on the maximum number of loops, knit 3-5 rows, and then successively reduce the fabric by one loop on each side in each front row. The result is also a triangle with a right angle.

Specifics of a triangular scarf

To form armholes, there is no need to knit ovals of complex shapes. It is enough to simply leave slits at least 15 cm long. In this case, the fabric is divided into three parts, which are knitted separately, then they are combined in a common row and knitted further, continuing to increase.

There is a special condition regarding yarn. You need to choose thin, soft yarn and a flat pattern to knit a transformable scarf with beautiful folds. Schemes and descriptions of patterns should be simple. You can use openwork or solid patterns, but they should be knitted loosely and freely.

Scarf with sleeves

And finally, the leader in the race for popularity among transformers is a scarf with sleeves. The unique model confidently occupies top positions in the ratings of fashion accessories.

The cut is based on an elementary rectangle. A variety of patterns are used for knitting it. Experienced knitters do not recommend using too intricate or voluminous patterns. You can experiment with colors and combinations of shades. A scarf is an accessory that should attract attention and enhance the accent of the main elements of the wardrobe.

The photographs below show an example of a single-color product.

Such a transforming scarf with knitting needles (patterns and descriptions are not required here, since a simple one was chosen as the pattern) can be called the easiest for knitters.

To get such a product, you need to knit a rectangle about 30 cm wide and about 2.5 m long. At the end of knitting, you should sew the ends of the scarf 60 cm from each edge (for the sleeves).

Transformable scarf with cuffs

The following figure shows an example of a product knitted with an English elastic band.

This is a more difficult to make transformable scarf with knitting needles. Diagrams and description of the elastic band:

High cuffs are made with 1:1 elastic. Otherwise, this transformable scarf should be knitted in the same way as the previous one. The thickness of the yarn should be medium, optimally 400 m/100 grams, knitting needles number 5.

Transformable scarf: description and diagram

The gray scarf model in the photos below is very special. It is knitted in a rectangle, and there are turns at both ends of the fabric. They are sewn and look like a simple hem, but you can thread your arms through them to create a convertible knitted scarf.

Schemes and descriptions of the knitting rope that decorates the model are given below:

These braids are the simplest of all. The diagram shows an example of interlacing strands consisting of one loop; in the photograph, the braid is formed by strands of two loops. All braids are woven in one direction.

Having mastered the described techniques and knowing the basic principles of knitting transformable scarves, you can get to work!

But just recently I saw a wonderful idea on the pages of Melange magazine. At first I even found it difficult to name this product - transformable knitted scarf or knitted * webu*m*niza.com snood transformer. To tie this one is unique transformable scarf Even the most novice knitter can do it. But the result will certainly please you - you will get 6 options from one simple scarf: here you have a hood, a headband, a skirt, a cape and even a dress.

Ready?? Begin.

We will need 300 g of Tecno Yarn Art yarn (100% * webumn^iz*a.com polyamide, microfiber, 100 m / 50 g), circular knitting needles No. 7 and hook No. 2.

We cast on 100 stitches on circular knitting needles and knit with knit stitches in the round. We knit a product of arbitrary length, finish by crocheting the edges with 2 p stitches without crochet.

The resulting product has the property of stretching, so it can easily be transformed into a bonnet, cape, ^ webu^mn*iza.com dress, skirt. You can see how to wear this wonderful work of our knitting art in the video.

The transformable scarf is a unique development of Western designers. One thing can replace an entire wardrobe.

Stylish, versatile and silky to the touch. A great detail for your outfit. The scarf can change in shape; it is this feature that makes it truly unique and multifunctional.

A warm scarf or a stylish jacket, an elegant skirt or dress - all this is one single thing - a transformable scarf. Every day you choose which image is closer to you.

The transformable magic scarf is simply mega-universal. The scarf is made in the form of a “pipe”, without seams. More than 20 options for transforming a scarf: shawl, blouse, hood, bolero, poncho, dress, etc. And this is not a complete list of possible options.

Fantasize and you will get a new detail of your outfit! Make your life even brighter and more diverse with a transformable scarf!

The secret of the versatility of the transformable scarf is in the special weaving of the thread. This scarf will never stretch or lose its shape. It can be washed - it will not fade or lose elasticity.

The scarf is so pleasant to the touch that you want to wear it again and again. This item is suitable for absolutely everyone, regardless of your size and age.

In any situation at any time of the year, this unique transformable scarf will make you look exceptional.

When in contact with the skin, it gives a very pleasant feeling of comfort.

Has stretchability in different directions.

Retains the shape of the product during repeated use and washing.

Will present a great variety of outfits.

Composition: synthetic fiber - 100% nylon microfiber Taiwan

Length: 180 cm

Max stretch 210cm

Stretchability: 80-85 cm.

Size range: universal.

Suitable for both adults and children, women and even men (one option is a scarf)

Somewhere on the Internet I once came across such a concept as Japanese transformable scarf. And what? Very comfortably! Here you have a scarf, a blouse, a bolero, a hood, a skirt, and even a dress! This is every girl's dream! I've been dreaming about something like this for a long time.

I took this issue seriously. I started looking for information on the Internet. And I found it) It turns out that it is knitted very simply!

Japanese transformable scarf - a whole wardrobe!

After watching this video, there were no other options left. "I'm knitting, I'm knitting!" - I was happy in search of yarn. By the way, the girl in the video handles the knitted item so deftly, it’s simply amazing! (I’m not that successful at this yet. Even men are surprised at how versatile a scarf can be!)

Yarn selection

It is recommended to take Tecno Yarn Art yarn - 100% polyamide, microfiber 100m/50g . You will need 300g of yarn, but 200g was enough for me. Don't forget to purchase size 7 circular needles and size 2 crochet hook if you don't have them.

Before starting work, cast on several dozen loops, knit a little and measure how wide the product is. Decide what width Japanese transformable scarf will suit you and, depending on this, dial the number of loops required for your scarf. It is likely that the option proposed here will suit many.

How to knit a transformable scarf

Knitting is primitive. Cast on 100 stitches on circular knitting needles and knit in the round with knit stitches. The main thing is that the knitting should be loose, do not tighten the loops too much, otherwise the product will not stretch well. The length of the scarf depends on your desire and perseverance))). Then we crochet the edges with single crochets for 2 rows.

How to knit single crochets

For those who have forgotten how to knit single crochets, I can remind you. We knit one air loop for height, insert the hook into the third loop of the chain, counting the loop that is on the hook. We hook the thread and pull it through the loop of the chain. Two loops have formed on the hook. Once again we pick up the thread and pull it through these two loops. We received the first column. In this way we knit the entire product, inserting the hook alternately into each loop in a circle. See the figure for a visual diagram.

Now you know how to tie Japanese transformable scarf. It stretches very well, so you can make an entire wardrobe out of it!

And finally, one more video, now in Russian)