How to crochet a case for glasses: diagrams and description of the work are included. I would like to learn how to knit a case or eyeglass case. Valve to continue knitting a case.

Spectacular knitting with beads

How to knit with beads

Knitting sc with bead:

Picot with bead
Crochet as follows. Pull the loop on the hook slightly and remove it from the hook. Thread a small piece of wire (fishing line) into the loop and fold it in half. String a bead onto the ends and slide it along the wire onto the loop
(Fig. 11a).

Remove the wire and insert the hook into the loop above the bead
(Fig. 11b). Stretch the thread and knit the next loop - picot is ready
(Fig. 11c). A picot with three beads looks elegant
(Fig. 12). If you make a picot with 7 or more beads, you will get a loop of beads.

Rice. 12

Stringing individual beads during knitting allows you to get

front loop with bead
. Knit a loop that should have a bead on it. Remove the loop from the knitting needle and insert a small piece of wire (fishing line) into it. Pull the loop out slightly. Thread a bead onto the ends of the wire and slide it along the wire onto the loop.
(Fig. 13a).

Rice. 13a

Remove the wire and insert the knitting needle into the loop. Pull the working thread and knit the row further
(Fig. 13b). In the next row, knit a loop with a bead according to the pattern. The bead will lie on the side of the front loops and will rise slightly above the canvas.

Rice. 13b

The edge is decorated with beads, stringing a bead onto the newly knitted edge loop in the same way as on the front loop.

The last row is also decorated with beads. String the beads at the moment when one newly knitted loop remains on the right knitting needle.

Remove the loop from the right needle and thread a bead onto it. Insert the needle into the loop. Knit the next loop of the fabric according to the pattern and pull it through the loop on which the bead is strung. The beads will be located at the very edge of the fabric and will be equally visible from the front side and the back.

You can knit anything, from purses (which is what they did in the 19th century) to large paintings; patterns are used for cross stitch.

The beads are cast according to the pattern from the bottom up, the fabric is knitted in the same order as the beads are cast - from the bottom up.

Patterns with beads are also crocheted in single crochet stitches.

If you knit a flat fabric, then one side will be the front side and the other will be the wrong side. Then one row must be knitted with regular single crochets, and the next (wrong side, when the fabric is turned) with the same stitches, but in a “crawfish step” (the same single crochets, but they are knitted from left to right. Otherwise, the beaded rows will end up on opposite sides of the fabric!

Next, you tighten the bead and pull the thread through the loop. And at the end you knit a loop as usual.

When knitting with beads, it is necessary to leave a border of 3-4 loops, so that later you can insert the picture into a frame.

And one more important note. The beads do not stand one above the other, but are slightly shifted. Therefore, if at the end of a row three spare loops are knitted (without beads), then at the beginning of the next row four loops must be knitted with thread.

As a result, the vertical shape is not a column of beads, but a wave, which creates an interesting effect.

Example: the first miniature is crocheted according to the pattern for cross stitch, crochet, knitting with beads. The second miniature is also crocheted, but without adding beads.

You can also embroider ready-made knitted fabric with beads.

Beaded accessories.

Everyone wears glasses, some for vision, some for sun protection. But no matter what the glasses are used for, they need a cover or case so that they do not get scratched or deteriorate. A crocheted case for storing glasses can serve as an excellent gift, as it will be original. In addition, it can be knitted to match any outfit - this is a definite advantage!

Look at the video for another way to implement this idea.

Step-by-step master class on crocheting a case for glasses

In order to make a case for glasses with your own hands, you need: yarn of any color (you can combine colors), hook No. 5.5.

The finished product is of standard size 10*16 cm.

The main pattern for quick and high-quality creation of a product

1st r. Bases: starts with the 2nd air loop. You need to pull out a loop on each chain stitch and keep all the loops on the hook.

2nd r. Grounds. Yarn over and pull through 1 loop on the hook, then the combination: yarn over and pull through the 2nd loop. Repeat this combination until the end of the row.

2nd r. Yarn over, then pull through 1 loop and repeat this combination until the end of the row: yarn over and pull through 2 loops on the hook. Repeat rows 1-2.

Now let's move on to the glasses case. Cast on 17 chain stitches. Start with the 2nd chain loop from the hook. Pull out a loop on each chain stitch. Rotate the product.

1st r. Knit as the second row of the pattern.

2nd r. It is necessary to skip the 1st column, then repeat this combination until the end of the row: insert the hook into the next column from right to left, pull out the loop. Rotate the product.

3rd r. Knit as the first row.

4th r. Knit as the second row. Rotate the product.

Valve for continuing knitting the cover

Knitting occurs without separating the thread from the main “body” of the cover.

1st r. Skipping the first stitch, knit the following combination to the end of the row: the hook is inserted from right to left into the next stitch and the loop is pulled out. Rotate the product.

2nd r. Yarn over and pull through one loop, then repeat this combination until the end of the row: yarn over and pull through 2 loops. Do not turn.

3rd r. Knitted similarly to the first one. Rotate the product.

4th r. Knitted similarly to the second one. Do not turn.

This is followed by a decrease in valve loops.

1st r. You need to skip one vertical stitch, insert the hook through 2 stitches and pull out the loop, then insert the hook into the next vertical stitch and pull out the loop. Continue knitting in this way until 3 stitches remain. After this, insert the hook into the next two vertical stitches and pull out the loop. Knit the last stitch.

2nd r. Yarn over and pull through one loop. Then repeat this combination until the end of the row: yarn over and pull through 2 loops.

3rd r. Knitted similarly to the 1st row.

4th r. Knit similarly to row 2.

Repeat rows 1-4 until 5 stitches remain. Then you need to knit the three middle stitches together, and knit the last stitch. Pull the thread through the remaining stitches and secure the thread.

If the technique of knitting a case was easy for you, rest assured that it will not be difficult for you to figure it out! So all that remains is to connect all the accessories in the same style.

Assembly of the product is quick and easy with description

Now you need to sew the sides of the product together. Tie off all seams, including the flap, with single crochets. Sew a button. If desired, you can tie a rope around your neck or arm.

This way, you can knit additional accessories.

For example, as in the photo.

You can choose a wide variety of patterns. You need to give free rein to your imagination. You can make a case from individual parts, for example, multi-colored circles knitted together as in the photo.

Or, after looking at the patterns, you can knit a case for glasses in the shape of an animal. You can give it to a child, it will also decorate the style you choose. An example of such an accessory can be seen in the photo.

The case can be decorated with any accessories - beads, knitted flowers or butterflies. With your own hands, using simple patterns, you can create a very cute and delicate accessory, as in the photo.

As a result, after looking at the patterns and design examples, you can knit your own original case that will surprise and delight everyone.

Schemes for creating a wonderful home accessory

This wonderful accessory for your glasses can be made at home!

The time and labor costs are minimal! But the result will definitely pleasantly surprise you! The diagram is shown in the photo below. True, it is written in Chinese - which cannot but complicate the novice needlewoman. But for those who are well acquainted with the crochet technique, it will be understandable, because the main thing is depicted schematically.

And here is another version of a very beautiful women's case for glasses.

Right away, we present a diagram for it.

It is created in the same way, just increase the size to the size you need!

Now, as they say, everything is in your hands! Train, experiment and let inspiration never leave you!

Finally, an interesting training video, be sure to watch it:

Master class from Natalia Plekhanova.
You will need: 50 g of thick orange wool blend yarn, 15 g of black or brown yarn, a little white and red, black bobbin thread, button, hook number 3. The main stitch is single crochet.

Description of the glasses case

Head - body.

We start knitting from the top of the tiger cub's head. We collect 4 air loops (v.p) with an orange thread and connect them into a ring with a connecting post.

2nd row – from 8 st.b/n we knit 16 st.b/n;
Row 3 – 1 ch for lifting, 1 dc, 2 dc in the column of the previous row. That is (i.e.) we expand the circle by knitting 2 tbsp through 1 tbsp.
4th row - expand in the same way as 3rd row, but after 2 st.b/n.
It should be 32 st.b/n. Next we knit 32 single stitches without increases, alternating black and orange thread colors.

We start alternating colors from the 5th row with black, knit 1 row with it and change it to orange, and knit 5 rows with it. The latter should be 1 row - black, 1 row - orange. We get:

interesting selection for the site!!!
An introductory article to amigurumi knitting. Basic techniques and simple toys.

Lid.

We knit it in orange on the back side of the cover, where the back of the tiger cub will be. We cast on 15 st.b/n and knit 5 rows, then we begin to decrease from 2 sides by 1 loop in each row, i.e. we do not knit 1 tbsp until there are 3 loops left, close the knitting. Sew on the button.

We tie the lid with black thread.

Muzzle pad.

We collect 4 air loops (chain loops) with white thread and connect them into a ring with a connecting post. Next we knit:

1st row – 1 ch for lifting, from 4 ch of the previous row we knit 8 single crochets (dc), that is (i.e.) we knit 2 single crochets into each stitch of the previous row ;
2nd row – from 8 st.b/n we knit 16 st.b/n. We knit 2 parts.
We embroider dots on the overlay using black bobbin thread.

Language.

We type 6 ch in red, knit 1 row of dc. We finish knitting, fold the strip and sew it in the middle.

Eyes.
We cast on 4 ch with white threads and knit in a semicircle according to the pattern of 2 - 3 rows. We knit 2 parts.

We sew all the details to the cover.

How to knit a glasses case with knitting needles.

An eyeglass case is a useful thing; it protects glasses from scratches and breakages. Good functional, suitable for any occasion.

The stylish case for GLASSES or other accessories is decorated with a twisted umr and fastens with a button.

DIMENSIONS: 19 cm long x 12.5 cm wide.
MATERIALS:

1 skein of 50 g yarn (wool) white
- knitting needles number 3 (3.25mm) or diameter that will allow you to knit the sample
- two double needles, size 3 (3.25 mm)
- auxiliary needle for knitting braids
- one button with a diameter of 25 mm

AVERAGE KNITTING DENSITY: 37 sts and 40 r. = 10 cm in pattern according to the pattern on needles number 3 (3.25 mm).
BE SURE TO LINK A SAMPLE.

LEGEND

4-st RC (cross 4 stitches to the right) Slip 2 stitches onto the auxiliary needle for work, 2 stitches, knit 2 stitches from the auxiliary needle.
4-st LC (cross 4 stitches in fawn) Slip 2 stitches onto the auxiliary needle before work, 2 stitches, knit 2 stitches from the auxiliary needle.
4-st RPC (cross 4 sts to the right) Slip 2 sts onto the auxiliary needle for work, 2 sts, purl 2 sts from the auxiliary needle.
4-st LPC (cross 4 sts to the left) Slip 2 sts onto a auxiliary needle before working, i.p. knit 2 stitches from an auxiliary needle.

On needles number 3 (3.25 mm) cast on 40 sts.

1st row (RS) *1 l.p., 1 i.p.; repeat from * to the end of the row.

2nd row Purl all knit stitches, and knit all purl stitches. Knit 2 more rows with a pearl pattern, as described, in the last row evenly add 4 sts - 44 sts.

STARTING WORK WITH A PATTERN ACCORDING TO THE DIAGRAM

Knit 1st - 4th r. according to the pattern, repeat 5 times (20 rows). Knit from the 5th to the 42nd row one more time. Knit rows 3 and 4 once, then repeat rows 1-4. 5 more times. Close all loops.

REAR DETAIL

Knit as before, but do not bind off the stitches.

Continue knitting the 1st – 4th row of the pattern as described. Execute valve sl. in this way: 1st row of decreases (RS) 1 l.p., 1 i.p., 1 l.p., 2 p. knit together purlwise, knit according to the pattern BEFORE the last 5 p., knit 2 p. together knit , 1 i.p., 1 l.p., 1 i.p.
Sl. row Knit according to the pattern. Repeat the last 2 r. twice – 38 p.
Sl. row (decrements) (RS) Repeat the 1st row of decreases.
Sl. row (decreases) (IS) 1 i.p., 1 l.p., 11 i.p., 2 sts knit together with the front one, knit according to the pattern until the last 5 sts, knit 2 sts together with the purl, 1 l .p., 1 i.p., 1 l.p. Repeat the last 2 rows 4 more times - 18 sts.
Sl. row (RS) 1 l.p., 1 i.p., 1 l.p., 2 p. knit together purlwise, (1 l.p., 1 i.p.) 4 times, knit 2 p. together facial, 1 i.p., 1 l.p., 1 i.p. - 16 p.
Sl. row *1 i.p., 1 l.p.; repeat from * to the end of the row.
Sl. row* 1 l.p., 1 i.p.; repeat from * to the end of the row. Close 16 p.

FINISHING THE JOB

Stretch the parts to size. Connect 3 seams, leave the flap free.

LACE FINISH

Cast on 3 sts on stocking needles. 7* 1st row (RS) – 3 sts.
Move the loops to the beginning of the knitting needle and knit sl.r. with LS, repeat from * until the length of the lace is approx. 81 cm. Close off the loops. Sew a lace along the edge of the seam, around the perimeter of the flap, making a buttonhole in the center. Sew a button.