DIY New Year's street decorations made from bottles. Creative Christmas trees made from plastic bottles - Irzeis. Video master class on making candlesticks. New Year's toys made from plastic bottles - a sea of ​​ideas! Winter craft from plastic bottles

A wonderful winter holiday is approaching - New Year 2020. It's time to decorate your house for its arrival so that Santa Claus does not pass by on his magic sleigh and leaves good gifts under our tree. It is very interesting to decorate the Christmas tree and rooms with homemade toys for the holiday. The process of making them is fascinating, as is any creativity. Such crafts can be made from the simplest materials, for example, from plastic bottles. From ordinary plastic bottles you can make a lot of interesting and beautiful things that can successfully replace store-bought analogues. Our story today is dedicated to the 7 best and original crafts made from plastic bottles for the New Year 2020, which will be held under the sign of the White Metal Rat. Let's look at them in detail in our article.

Christmas tree

An unusual Christmas tree can be made from simple plastic bottles. It is important to collect the necessary materials for this craft and follow the master class step by step.

To do this you will need:

• Plastic bottles;
• Scotch;
• Sandpaper (cardboard);
• Scissors.

Progress:

1. The bottom and neck of the bottle should be removed, and then you will get a straight pipe. Then you should prepare blanks from twigs. They must be of different sizes so that the Christmas tree turns out to be cone-shaped.
2. Then the plastic bottles need to be cut lengthwise into 3 parts so that subsequent tiers are smaller than the previous ones. You need to make needles on each workpiece, and to do this they are cut into thin strips, but not completely. To make the Christmas tree stand stable, it is advisable to use the bottom of one of the bottles as a stand.
3. A sheet of cardboard needs to be rolled into a tube and placed in the neck of the bottle. You can secure it with tape. Now each tier of branches needs to be secured to the tree. You can install a toy on the top or come up with something else. To make the Christmas tree fluffy, the needles should be cut thinner. Usually blue or transparent bottles are used for this. That's all, our craft is ready!

Christmas balls

You can decorate your Christmas tree with handmade toys. In your work, it is important to follow all the steps step by step, and then you will get wonderful products.

To do this you will need:

• Plastic bottle;
• Glue;
• Rain;
• Any shiny jewelry.

Progress:

1. The paper needs to be wrapped around the bottle: this will help mark the workpieces on it. It is necessary to cut 4 rings 1 cm wide. Then the rings must be fastened together using the “crosswise” principle and secured with glue. The result should be a ball of plastic strips. You need to choose beautiful threads or rain so that the toy can be used for the Christmas tree.
2. To decorate the resulting blanks, it is better to use foil, beads, seed beads, etc. You can place a small ball inside such a ball. You can use as much imagination as you like with this craft. This will be a very interesting activity for children.

Snowflakes from plastic bottles

To expand the range of crafts made from plastic bottles for the New Year 2020, you can also make snowflakes from the bottoms of bottles as a Christmas tree decoration. This process will also be possible for beginners in this creative endeavor.

To work you will need:

• Scissors;
• Acrylic paints of white, blue, gold, silver - to choose from;
• Plastic bottles, preferably blue;
• Paint brush;
• Wire;
• Pliers.

Progress:

1. We take plastic bottles and, using a utility knife or scissors, cut the bottom as low as possible to the base, leaving only the corrugated part.
2. After the bottoms are ready, we begin painting our future snowflakes. Depending on the desired design, select the thickness of the brush, and then start painting. As drawings, you can use various ornaments that come to your mind. This also applies to the choice of paint color with which you will decorate your New Year's product.
3. Once your snowflake has turned into a beautifully painted masterpiece, give it time to dry while you use wire and pliers to make a small eyelet for the thread. Attach it to the snowflake and thread the thread into this ring.

Well, our New Year's toy for Christmas tree decoration is ready, which you now have the right to be proud of. A snowflake made by yourself can serve as a worthy decoration not only for your home, but also for a kindergarten if you have a small child, and can also act as an exhibit at an exhibition of New Year’s products at a school.

Penguins made from plastic bottles

An original New Year's decoration for your home for the New Year 2020 can be penguins made from plastic bottles, which should be placed in the rooms and under the tree as decoration. This craft will delight all your family and guests, and especially children. Without spending a lot of time, you will create with your own hands a real masterpiece of art that will cause a lot of positive emotions and sincere smiles in your household.

To work you will need:

• Plastic bottles (one toy takes two bottles);
• Scissors;
• Acrylic paints - white, black, red and others;
• Brushes;
• Small colored scraps for a scarf;
• Buboes or bows for hats;
• Glue.

Progress:

1. We take the bottle and cut off the top part almost completely or half to get the body of a penguin. The head is made from another bottle and also from the lower part, but the workpiece should be slightly smaller.
2. We connect both blanks by inserting the upper part, which is smaller, into the lower part, which is larger.
3. After you have built the penguin's body, start painting it. Take acrylic paints and carefully apply them to a plastic product, imitating the color of a penguin, as shown in the photo. Use more bright colors, because the brighter your New Year's penguin turns out, the warmer and more cheerful the smiles of your family will be.
4. When your penguin takes on a realistic look, you can tie a small scarf around its neck and attach a bubo or bow to its cap using glue.

What a cartoonish miracle you have created!

Video tutorial on making penguins from plastic bottles

Golden bells

Golden bells will look original on the New Year tree. This work is done very quickly and is suitable for kindergarten.

To do this you will need:

• Plastic bottles;
• Acrylic paint; if desired, instead of acrylic paint, you can use fabrics, ribbons and accessories.

Progress:

1. For work, you should take 0.5 liter bottles, but more is possible if the tree is very large. The bottom of the bottle should be cut off. To make bell petals, you need to cut the edge of the bottle in a zigzag shape. Because the resulting edges will be sharp, care must be taken.
2. The petals of our craft need to be made pointed, and you can use a knife to give them shape. To make holes for the rope, you need to heat the knitting needle and make holes. You can do this work with scissors, but be very careful. At the end of the work, the bells should be painted, and they will dry within an hour. To give the products a New Year's look, they need to be decorated with tinsel, garlands or sparkles. The instructions are simple, and you can do the work in your own sequence.

Candlesticks made from plastic bottles

To do this you will need:

• Plastic bottles;
• Scissors;
• Glue gun;
• Universal glue.

Progress:

1. You can make a wonderful candlestick for the holiday with your own hands. You can use bottles of different colors. The containers need to be cut in half. The edges of the part that remains with the bottom should be cut into strips, not reaching 4 cm. The strips can be of different widths. The resulting container will be a candle stand.
2. Strips of plastic should be melted over a candle. Then use a glue gun to attach the candle to the foil. The space around the candle can be decorated with beads or stones. This way the candlestick will have little weight, and our craft is ready.

Video master class on making candlesticks

Cone

You can make original cones with your own hands; this craft from a plastic bottle will perfectly decorate your Christmas tree and home for the New Year 2020.

To do this you will need:

• Plastic bottles;
• Scissors;

Progress:

1. You need to create squares from a plastic bottle, after which their corners should be rounded. The result will be products like chamomile. After this, you need to treat the edges of the petals with a candle so that they fall down.
2. All parts must be strung on a thread in descending order. A bead must be inserted between them. Then you need to make a spruce branch and secure it to the pine cone. The product is ready to create a festive atmosphere.

Plastic bottles cause horror among all environmentalists on our planet. The problem is that repeated use of this (seemingly) convenient device is harmful to the body. How to be? The answer is simple - creativity. New Year's toys made from old bottles will create incredible comfort. Making them will be as easy and enjoyable as possible, and we will show and tell you how to make them yourself. Let's start with the video.

The simplest craft option

For this craft you will need:

• bottom of the bottle;
• paint/markers/markers;
• needle, thread, fishing line;
• paper;
• ribbon.

It is necessary to cut off the bottom of the bottle (you can take any volume). And then do some magic on it: paint it or leave the original color, decorate it with snowflakes, make a hole and thread a fishing line on which the toy will hang on the Christmas tree. You can make a single design using the same fishing line. All this can be seen in the photo below. We have selected several master classes.

Balls from a bottle

In this case, we just need to cut our bottle into strips. These strips must be the same length and width. They need to be glued at one end and then at the other so that the future Christmas ball is formed. This ball can be decorated as you please: – Metal Ox, so you can build on that, and also refer to traditional New Year’s symbols (sparkles, ribbons, red/green/gold paints, rain, pine cones, etc.).

Bells from a bottle

Bells in the form of a New Year's toy will decorate the Christmas tree with their presence. How to make them - the top part of the bottle is necessary, because it is similar in shape. You will need paper, foil, paints, tinsel, fishing line, ribbons, glue. Part of the bottle should be wrapped in foil, secured with glue (preferably instant fixation) and decorated with snowflakes, tinsel, etc.

One two Three! Shine Christmas tree!

For this Christmas tree decoration you will need several bottles. Again, we take several of the upper parts, cut them into small strips, and place them on top of each other. The lower part can serve as a base. They can be secured with glue, but this is optional. Decorate with balls, beads or tinsel.

A few more ideas...

Toys made from bottles are just your imagination, which you can literally make into reality with your own hands. You can use any paints. The shape depends on preference. It is not necessary to take small bottles; for example, you can make a Santa Claus from a five-liter bottle (you can make a beard from plastic spoons). Lids can also become a Christmas tree decoration. We have selected several ideas.

The Christmas tree is, of course, the main decoration of the New Year. On the eve of the upcoming holiday, the whole family dresses up the forest beauty. Standard Christmas tree decorations have already become boring. However, you can decorate the Christmas tree with something you made yourself; for example, a Christmas tree toy made with your own hands from plastic bottles will look great. In addition, the creation process will bring a lot of pleasure to your children.

Today, making your own Christmas tree decorations is not difficult. Even if you lack skills in this area, you can always use a helper such as the Internet. This article will look at the simplest ways to create toys for the Christmas tree with your own hands.

Volumetric toys

Before diving into the creative process, you need to decide on the type of material used. You can make a three-dimensional decoration from absolutely any available materials. Naturally, paper products are the most popular. They have earned their fame due to their ease of manufacture. In addition, such Christmas tree toys, created with your own hands, look quite impressive on the forest beauty.

A voluminous toy can also be made using thick thread or twine. It’s just important to take into account the fact that creating such a masterpiece will require a large amount of glue. Jewelry made from beads looks quite original. Of course, it will take a lot of time to make such a toy, but it is worth it.

Volumetric paper decoration

To make jewelry you will need the following:

1. Colored paper.
2. Ribbon.
3. Paper glue (preferably quick-drying).

Step-by-step instruction

Do-it-yourself voluminous Christmas tree toy is done as follows:

1. First of all, you need to cut out eight circles from paper. To make the decoration look impressive, it is recommended to use different colors. It is important that the circles are the same size.
2. Each piece is folded in half, with the front side on the inside.
3. After that, glue must be applied to the wrong side of each half, then the parts are connected to each other.
4. And finally, the first and last halves are glued together. Don’t forget to thread a ribbon through the toy, with which it will be attached to the Christmas tree.

A DIY Christmas tree toy created using the method described above can be made not only using colored paper. You can also use clippings from old magazines, old postcards, or even your children’s self-drawn pictures.

New Year's balls made of threads

As mentioned above, Christmas tree decorations can be made from more than just paper. Balls made of thread look quite attractive. And most importantly, their creation does not require special skills or large financial costs.

To make Christmas tree toys from threads with your children’s hands, you will need the following:

1. Yarn.
2. A bowl.
3. Balloons.
4. Scissors.
5. Fat cream (vaseline).
6. PVA glue.

How to make balls of thread - instructions

1. First you need to inflate the balloons. Their number depends on how many Christmas tree decorations you plan to make. Please note that you do not need to inflate the balloons to a gigantic size, because the decorations on the Christmas tree should be miniature.
2. Once the “template” is ready, you should move on to the main stage of the creative process. To do this, you need to dilute water and PVA glue in a bowl in a ratio of 1:3. Yarn is placed into the resulting mixture (for about 5 minutes).
3. While the “base” of the toy is soaking, it is necessary to cover the balls with greasy cream or Vaseline. This is done so that the thread does not slip off the workpiece.
4. The yarn should then be wound around the ball. The distance between the threads must first be large. When wrapping the ball with thread, this distance will be reduced.
5. At the end of this process, the thread must be cut and glued to the ball. Now the almost finished Christmas tree toy, made with your own hands, must dry.
6. After a day, the balloon is deflated and then removed from the toy. The Christmas tree decoration is ready. All that remains is to attach the rope.

When making this decoration, you can use multi-colored yarn. The finished craft is also decorated with sparkles, tinsel or beads.

Christmas tree decorations - heart and ball

For such decorations you will need the following tools and materials:

1. Scissors.
2. Tweezers.
3. Glue gun.
4. A reel of small plastic beads.
5. Small and large plastic garlands.
6. Decorated cord.
7. Heart and ball made of foam.

This method is perfect for decorating not very flashy Christmas tree balls made of plastic or updating old ones. In this case, you can use cords and beads of various diameters. For small balls, it is advisable to take a thread of small beads and a thin cord; on large ones you can stick both small and large beads. A Christmas tree toy decorated with your own hands using three threads and cords at the same time looks no less original.

Manufacturing instructions

1. Unravel the finished garland into separate threads. Take the cord and use tweezers or small scissors to plunge the end into the foam ball.
2. Apply a small amount of glue to the surface of the ball (in the place where the cord is attached) and secure the end of the bead thread.
3. Then the ball is gradually covered with glue and at the same time beads and cord are laid on it (row by row) until the entire surface is filled.
4. Then you need to cut off all the excess and immerse the end of the cord in foam. Thread the needle, then pass it through the cord to create a hanging loop.

The foam heart is decorated in the same way. Using a glue gun, a string of beads is attached to its edge. The beads are glued to one side, the turns are gradually laid in the direction from the edge to the center.

It is not at all necessary to use beads of the same color and size. When you get close to the center of the heart, cut the thread, then glue small pieces of it, cutting off the required number of beads using scissors. After completing one side of the craft, move on to the other. Finally, attach a ribbon or string for hanging.

DIY Christmas tree toy: big balls

To make Christmas balls from plastic bottles, you will need:

1. Plastic bottle (it is important that stiffening ribs run around the bottle in rings).
2. Old CDs.
3. Beads or small balls for decoration.
4. Sequins.
5. Rain - preferably dense, which does not stretch from tension.
6. Glue (it is better to use “Moment”).
7. Stationery knife.

How to make Christmas tree balls from plastic bottles

1. First you need to thoroughly wash the bottle. As a result, a layer of glue from the label will remain on its surface. It can be easily removed with tape; to do this, stick it to the place where the glue is and then tear it off. Such manipulations should be continued until the glue is completely removed from the plastic.
2. Let's proceed directly to making a masterpiece. So, 1 ball - 1 bottle. There are grooves on the side surface, along which you need to cut the bottle using a stationery knife.
3. The resulting rings need to be trimmed with scissors so that they are the same in width.
4. 4 rings are connected and secured to each other using rain. Do the same on both poles, making a loop on one of them.
5. For passionate fans of minimalism, this Christmas tree toy, made with your own hands from plastic bottles, is completely ready. Everyone else can move on to the next step.
6. Balls can be decorated in various ways and materials. For example, wrap it in rain, cover it with pieces of a CD or sequins. You can also use plastic beads, rain trimmings, shells, beads and much more as decoration.

DIY Christmas tree toy: large plastic decorations

Almost every home has used plastic bottles, but not everyone knows what beautiful crafts can be made from them. For example, a flower made from the bottom of a bottle. To make such a toy you will need:

1. Super glue.
2. Decorations.
3. Gouache or acrylic paints.
4. Colorless plastic bottle.
5. Scissors.
6. The cord for fastening is approximately 30-40 cm long.

Manufacturing

A DIY Christmas tree toy for kindergarten made from a plastic bottle is done as follows:

1. Using a stationery knife or scissors, carefully cut off the bottom of the plastic bottle.
2. The surface of the bottom is covered with acrylic paint. This paint is resistant to any weather conditions, so the toy can later be used to decorate a street Christmas tree. If you don’t have acrylic paints, use gouache to create a decoration for home use.
3. The bottom can be decorated with rhinestones, beads or painting. A satin ribbon is glued along the edge of the cut.
4. Using an awl, a hole is made for fastening. A ribbon or cord is pulled through it so that a loop appears on the outside, and the knotted ends remain inside the flower.
5. A DIY Christmas tree toy for kindergarten!

If you use two bottoms, you will get a more voluminous toy. The sequence of actions when making such a decoration will remain the same, only at the end the halves are connected by cuts. To do this, you will need superglue or double-sided tape, as well as satin ribbon to mask the connecting seam.

Soft fabric Christmas tree

It is not at all necessary for the Christmas tree to be green and prickly; it can be soft and pink. We will sew a decoration that is suitable not only for the Christmas tree, but also as New Year’s decor for your home.

For this you will need:

1. Fabric size 15 x 22 cm.
2. Pattern.
3. Embroidery threads.
4. Decorative tape.
5. Polyester filling.
6. Pins.
7. Embroidery needles.

Step-by-step instruction

So, the soft toy “Christmas tree” is made with your own hands according to the following scheme:

1. Download the pattern or make your own, print and cut out. It is advisable that it be on cardboard.
2. Fold the fabric in half. Place the pattern on it, circle it with chalk, then mark the hole through which your Christmas tree toy “Christmas tree” will be stuffed with your own hands.
3. Next, without touching the holes, sew the pattern. In order not to spoil the shape of the tree, you need to be especially careful when bending.
4. Now cut out the pattern as close to the seam as possible. You need to leave a little more space at the material hole.
5. Turn the Christmas tree inside out, shape it and iron it.
6. Make six marks on the fabric where the knots should be.
7. Fill the decoration with a small amount of polyester (about the size of a chicken egg).
8. Then you need to sew up the hole. At the top, fasten the thread and tie it with a knot.
9. In order to make knots, in the places marked with dots on the pattern, you need to sew stitches in front, back and back.
10. Then you should tie a bow from a decorative ribbon and sew it at the very top with a few stitches.
11. Now the educational toy “Christmas tree”, sewn with your own hands, is completely ready.

Funny toys for the Christmas tree

1. Once you select the shape you like, cut out a template from thick cardboard. Then select the threads - they should be voluminous and dense.
2. A thread is attached to the template, after which we wrap it around our Christmas tree toy with our own hands so as to cover all the cardboard.
3. Next you should sew on a rope for hanging.
4. The toy must be thoroughly soaked on both sides with glue.
5. Once the glue has dried, you can start decorating. If we plan to make a giraffe, then first we apply brown acrylic paint.
6. After the paint has dried, use masking tape to cover the areas not intended for painting.
7. Next, a second layer of acrylic paint is applied.
8. After drying, the toy can be decorated with beads or sequins, and details can be outlined (ears, eyes).
9. The Christmas tree decoration is ready.

New Year's Eve with toys in which a piece of your own heart has been invested will become the most unforgettable event!

1. Christmas tree made from plastic bottles

Prepare a Christmas tree like this green plastic bottle, scotch, scissors(such that they can easily cut a plastic bottle, Whatman tube. The only thing you can add to such a Christmas tree is to decorate it with beads, gluing them to the Christmas tree with glue. You can hang a rain ribbon. You can make this craft with your children. Next, we do everything as in the photo:

To make a decorative New Year's craft: a Christmas tree from plastic bottles, you will need the following:

1. Plastic bottles - 3 pcs;
2. Scotch;
3. A sheet of thick paper, ideally whatman paper (A4);
4. Scissors;

So, cut the bottle as shown in the photo below. That is, it is necessary to cut off the bottom and neck so that a straight pipe from the bottle remains.

Cut each plastic bottle lengthwise into 3 equal parts and then adjust their sizes so that each subsequent tier is slightly smaller than the previous one. Then each workpiece must be “dissolved into needles.” The neck of one of the bottles will serve as a stand for our future New Year's craft.

The next step is to roll the Whatman paper into a tube. We insert it into the neck of the bottle and secure it with tape in a circle.

You can decorate the top of our New Year's tree with a homemade Christmas tree toy or complete the tree the way we did.

If you want to make a fluffier Christmas tree from PET bottles, like the one in the photo below, when making the Christmas tree, you need to cut the needles as thinly as possible (more often).

2. For Christmas trees made from plastic bottles You will need green bottles of various sizes and a wooden stick with a diameter slightly smaller than the neck. The length of the stick will determine the height of the tree and the number of bottles.

I guess it's ready)

4. Another very interesting option

For production we will need:

• scissors
• green bottle
• cork plug
• round glass of cottage cheese dessert
• candle
• glue.

Also find foam rubber. We cut a piece of a kitchen sponge for washing dishes.

First, cut the green bottle into squares or circles of different sizes. For the bottom of the Christmas tree, the width of the square should be at least 6-7 cm, for the middle - about 5 cm, for the top of the head 2-3 cm is enough.

Now, using scissors, we densely break through the edges of the stars. You can call your household for help. In fact, the work is painstaking and requires a lot of patience. Edging the edges takes approximately 30 minutes. To make the spruce paws look more natural, we bring the plastic to the flame of a candle. The tips of our coniferous branches will gracefully curl down. Here is the finished result.

It's time to apply glue and foam rubber. Cut the sponge into small pieces (1x1 cm).

Now we lubricate the largest spruce paw with glue, and put a cube of foam rubber on top. Add glue again and cover it with green plastic.

We continue working until we run out of parts. Don’t forget that we are “building a pyramid”, and therefore with each subsequent gluing we focus on the size of the plastic star.

All that remains is to design the trunk of the coniferous tree. Of course, its role will be played by a cork plug. However, to make the craft resistant to tipping over, we will place a small yellow bucket in the tree. Let's cut it out of a round cup.

Lubricate the bottom of the bucket with glue and place a cork barrel in the center. Set aside the part for 2-3 minutes, let it dry completely.

We connect the crown with the trunk. The result was a slender emerald Christmas tree made from plastic bottles. A real forest beauty.

Bottom line

5. By the way, the Christmas tree also looks quite creative with larger “branches”
We cut the bottle into 3 parts. Only make cuts in a circle towards the center, straight.

A puncture is made in the center with an awl and the needles are bent up and down in order. A puncture is made in the lid of the cream or mineral water into which a skewer of the required length is inserted.

The parts are strung in descending order, with a large bead placed on top of the glue. The Christmas tree can be decorated with polystyrene foam, rain, etc.

Glue the Christmas tree onto the disk stand.
The Christmas tree is ready

Content

And we come to you, as always, with our interesting and original ideas for New Year’s crafts. This time we will create crafts from plastic bottles. Firstly, don’t forget that plastic takes more than 100 years to decompose, so we should use it as much as possible in order to do less harm to the environment.

Secondly, these crafts will not require too much money from you. Thirdly, you can make a lot of interesting things from this scrap material. In our article you will find figurines, a garland, a piggy bank, Christmas tree decorations and many other crafts made from plastic bottles.

New Year figures made from plastic bottles

These New Year crafts from bottles are very easy to create. Here is a set of necessary items:

• plastic containers;
• scissors and stationery knife;
• paints, brushes;
• textile;
• Knitting;
• felt;
• glue gun.

For example, you can make adorable penguins. To do this, you need to cut the workpiece in half, and cut off the bottom for the cap. Next, you need to paint them like penguins, glue the parts together using a glue gun and decorate the figures with textiles.

A little advice - instead of a glue gun, you can use tape, which you can simply paint over later.

Use acrylic paints, they adhere better to plastic.

From this simple and affordable material you can also make bright and beautiful apples, which can be placed under the Christmas tree or used to decorate the kitchen. By the way, the decor is suitable not only for the New Year, but also for other holidays.

You can make a toy for a child - a horse on a stick. If you improvise, you can also create a dog, because this is a symbol of the upcoming 2018. And the color, by the way, is yellow! So use more yellow when creating your wonderful crafts.

Christmas tree decorations made from plastic bottles

If you have collected a lot of material that we need in the house, and you no longer know where to put it, then our advice to you is to get creative! Use this container for creativity! You can make wonderful snowflakes from the bases. They just need to be slightly decorated and a string attached so they can be hung. Use a thin brush to apply the design. From such blanks you can create a whole garland or a wreath for the door.

Crafts for the New Year from bottles are both original and inexpensive.

But these bells are obtained from the tops:

A whole ball can be created from the bases of bottles. The parts can be decorated, or they can be used in their original form:

Crafts made from plastic bottles for the New Year are an opportunity to give old things a second chance, an opportunity to join the culture of recycling things and sorting garbage. Thus, we consciously approach the use of resources, and besides, you can always call yourself a trash art artist, and this, by the way, is a very fashionable movement today. In general, this handicraft is good on all fronts!

And the following Christmas tree balls are made of strips, which are decorated with various beads, paints, ribbons and other decor:

Snow globes

Another cool idea is to use plastic bottles to create Christmas snow globes. What we need:

• smooth plastic bottles;
• acrylic paints, brushes;
• glitter;
• decorative figures;
• glue;
• foam or artificial snow;
• sequins, beads.

First, you need to cut off the top and bottom parts of the bottle so that one tube remains. You need to cut a circle out of polystyrene foam along the diameter of the pipe; we will attach our decorative parts to it.

Then, having coated the sides of the foam with glue, it needs to be glued to the main part of the composition, placing the decorations inside.

The top and bottom of the pipe can be decorated with cut-off parts of the bottle, gluing them with a glue gun and decorating them with artificial snow and ribbons. Crafts from plastic bottles are ready! You can also sprinkle sparkles, sequins and beads inside.

You can, on the contrary, use only the top and bottom to create a kind of New Year's snow globe.

Cones made from plastic bottles

Another decorative option when plastic is used to create a cone. It is better to use brown blanks right away.

You need to cut out something like daisies from your material and string them on a string. Make blanks of different sizes so that you end up with a cone. You can cut fir branches from a green bottle.

Wreath made from plastic bottles

For this we will need the bottoms of plastic bottles, wire, a bow and other decorations.

The details can be painted gold to give the craft pomp and completeness, and also to disguise the material from which the wreath is made.

Candlestick for New Year

One of the New Year's attributes is a candle. Well, you and I can make some pretty good candlesticks.

The next candlestick is made of two components, decorated with coffee beans, but, most importantly, it is a beautiful decorative candle.

By the way, do not forget that you can use not only bottles of mineral water or sweet water, but also bottles of yoghurt, kefir and other products.

Souvenirs for the New Year

You can prepare something humorous and funny for guests or children. For example, make a pig piggy bank out of a plastic bottle. And what? Very original! If you manage to make a dog piggy bank, it will be even better!

Use acrylic or spray paint, felt parts, fabric, beads and various other decor for decoration. But children will definitely be delighted with such funny turtles. For the base, use thin kitchen sponges or foamiran. We have already described how to work with this material in our articles.

How do you like a whole flowerbed of tulips in the middle of winter? This composition can be used to decorate a summer cottage or the courtyard of a private house. Guests will definitely not understand at first that these beautiful flowers are made from ordinary plastic bottles. As they say, crafts made from plastic bottles for the New Year are a manifestation of imagination and ingenuity.

And a few more options for completely non-winter flowers made from the simplest and most accessible materials at hand:

Cup made from a plastic bottle

If you want to stand out from the crowd, have a special attribute, or you need to have a cup to match your costume, then it can very easily be made from the material we know. By the way, read our articles where we tell you how to make crafts for the New Year from a bottle of champagne - this may also come in handy. So here's the cup:

Luxurious, right? And, at first glance, you can’t tell at all what it’s made of, and at the second glance, too!

The design of a future cup for wine or as a reward may look something like this:

Or like this:

We really like to tell you about various unusual crafts, about materials from which you can make amazing things and which are found in almost every home. All this so that you can find a moment for creativity, for relaxation, for your hobby. Slow down time around you, let, as they say, the whole world wait while you create beautiful things. Well, in conclusion - crafts for the New Year from bottles video master class:

See how you can create a fun garland that you can hang in the kitchen or in the children's room, or wherever you want, at your discretion.

Post Views: 1,265