Cutting applique from corrugated paper for children. Trimming from corrugated paper: master class, diagrams. Trimming: what is it?

Job title: "Poppy Fantasy"

The master class is intended for children from 5 years old and adults.

Work can be a wonderful gift for any holiday. In addition, this master class is an excellent guide for beginners.

Purpose of the master class: creating compositions using the planar trimming technique.

Tasks: introduce planar facing technique, teach basic working techniques, teach how to create compositions using this technique; develop motor skills, sense of taste, imagination, creative thinking; cultivate an interest in working with corrugated paper, a desire to please loved ones with the composition.

Trimming- this is one of the types of paper design, the art of paper rolling, when using a stick and a small square of paper, end tubes are created by winding a square onto a stick. Trimming can be done on plasticine and on paper. There are several types of trimming on paper: volumetric, contour, multilayer and planar. Today I offer you planar trimming, when the trimming tubes are located throughout the entire pattern tightly to each other at right angles.

Poppies using planar trimming technique. Step-by-step manufacturing process

The following equipment is required for operation:

Corrugated paper of different colors: black, two shades of red - light and dark, two shades of green and marsh color.

PVA glue, scissors, match or toothpick.

Black and white drawing "Poppies". The drawing was taken from the Internet.

First, we need to prepare paper squares for trimming. Take a roll of corrugated paper, without unfolding it, cut off a small piece.

We take scissors in our right hand, our small roll in our left hand, outline the required width for the squares (0.5 cm) and begin to cut the strips vertically.

These are the stripes we got.

Without unwinding the strips, we begin to cut them into squares 0.5 cm in size. The smaller the squares you have, the more beautiful the end pieces will be.

The result is these squares.

Let's start working with the drawing.

Apply a small amount of PVA glue to part of the flower.

Place the end of the toothpick in the middle of the square and twist it tightly onto the toothpick.

Without removing the resulting tube from the toothpick, place it at a right angle on the contour coated with glue.

Now we take the toothpick out of the paper tube, we get a tube-end.

We place the next ends next to the previous ones. The denser the tubes are, the richer the composition will be.

In this way we lay out the entire flower along the contour.

We begin to fill the entire flower.

Where it was necessary to highlight the petals and give a more natural look, I used different shades of red and here and there orange so that the composition did not merge and the petals were visible.

Here you can see a dark red tint around the edges.

And here are stripes of orange.

And here you can see the play of colors and shades.

This is how the poppy turned out. We don't fill the middle yet.

Some of us, when we first heard the name of this type of creativity, ask the question: what is trimming? There is nothing complicated hidden behind this name. This is a technique for working with paper that combines both applique and quilling. This method is so easy to master that even kids in kindergarten can easily learn this type of creativity the first time.

Before you start working in the trimming technique, you need to decide on the pattern according to which you will later create work from trimmings. For those just starting out, these diagrams are perfect:

Such pictures can also be used for activities with the baby.

In general, almost any drawing is suitable as a pattern for trimming. The main point you need to know is that the simpler the pattern, the larger the dimensions of the blanks for trimming can be. And vice versa, the more complex the diagram and the more small details it contains, the smaller the squares of paper or napkins should be. Another important point is that when working with napkins, the thickness of one square should be 2-3 layers, since in one layer the paper will tear and nothing will come out.

Thanks to a technique such as trimming, very unusual things are obtained: topiary, three-dimensional crafts, and, of course, paintings.

Cutting from napkins: making a Valentine card

This original gift cannot but please the one who receives it. A simple technique will give anyone the opportunity to create such a valentine on their own.

Materials for work

• A ready-made card in the form of a Valentine's card.
• Three-layer napkins, which will be used to make trims.
• Cardboard for the template.
• Scissors.
• Pen rod.
• Plasticine

First, let's start drawing the template. To do this, take a ready-made postcard, attach it to the cardboard and circle it.

Now cut out the resulting shape and bend it.

In the middle, write your wish or confession.

Take white plasticine and apply a thin layer to the front of the card.

Now we proceed directly to the trimming. Take a napkin and divide it into three layers.

Since the Valentine is small, the size of the cut squares should be 1x1.

If you don't want to make a single-color card, then the heart can be divided into color zones using a pen.

We begin to make trims, as shown in the photo.

Without removing a piece of napkin from the rod, press it in the place where the given color is indicated on the plasticine.

The trim pieces should be very close to each other, so that there are no gaps, then the work will look much better.

Well, the valentine is ready, and now you know how to do such things easily and simply. The technique of cutting from paper napkins is practically no different from the technique of working with corrugated paper, so the source material can be easily changed to your taste. Good luck and new achievements!

Video lessons for beginners

Contrary to its name, trimming has nothing to do with processing the ends of any object. This design technique, often used to decorate postcards and paintings, is related to appliqués, but unlike the latter, it is aimed at creating volume. The intricacies of trimming are very easy to master, so this activity is ideal for leisure activities with young children.

Trimming: what is it?

The main attractiveness of paintings created using the cutting technique lies in their certain airiness and lightness, which is achieved through the use of corrugated paper - thinner and more transparent than ordinary colored paper. And also due to the technology of cutting and fixing it. Unlike other methods of working with paper, in trimming the accuracy of cutting out parts does not play a role: on the contrary, the more uneven the edges are, the more attractive the finished picture will be, since it will have an individual relief. True, some rules still need to be followed so as not to step over the line between deliberate negligence, which adds liveliness, and unattractive, carelessly performed work.

To realize the idea conceived using the cutting technique, in addition to the picture, you need to stock up on colored corrugated paper, which is cut into small elements of square, triangular or round shape, 1.5-2 cm in width and length. In this case, as already mentioned, the edges can be made not only smooth, but also zigzag, wavy, etc. The main thing is not to unnecessarily increase the size of the parts. If the picture is large, you can make 3*3 cm squares, but no more than that. The smaller they are, the more of them there will be in a certain area, as a result of which the filled form will look more holistic.

The paper is fixed to the glue using a thin long object: it can be a pencil or a match: the area of ​​its end should be small, and at the same time it will be inconvenient to use a thin needle. The match is placed exactly in the center of the paper element, after which its edges rise, clasping the match, and curl slightly along it. Then the paper is pressed against the side edges of the match with your fingers to strengthen the resulting paper shape, and the element is seated in the chosen place using glue.

Finally, it is pressed down in the same center where the match stood for 5-7 seconds. According to this algorithm, each paper blank is glued, and the larger the area that needs to be filled, the longer it takes to work with the product, since the elements are placed end-to-end to each other, with maximum density. When examining the finished section, the joints of the parts should not be noticeable: visually, a craft made with high quality using the cutting technique always resembles an expensive fluffy carpet.

Those who are just trying their hand at this method of decorating products with paper are recommended to start with simple “paintings”, practicing not only the step of twisting and fixing parts, but also transitions and color combinations. For example, lay out a rainbow, trying to make the stretch as soft as possible, which is achieved by selecting a large number of shades of paper and smoothly blending elements into each other.

If you want to try experimenting with shape, building flexible lines, start with simple geometric shapes and their connections: first fill the circle, making it as even as possible, then connect it with an oval - you get the head and torso of a person. Then you can begin to deform the usual details: concave several lines of the triangle so that you get a butterfly wing, or stretch out its base in places and round the top, getting a barely open tulip bud.

Corrugated paper cutting technique: description

• The basic principles of trimming as a technique were discussed above, but it is worth understanding that trimming does not always involve filling a certain area. For example, there is a contour trimming technique, the name of which speaks for itself: fluffy paper twists frame the selected shape around the perimeter, and the center can either remain empty or be decorated using other techniques - quilling, scrapbooking, etc. Contour trimming also looks interesting on crafts made in monochrome or when using only 1 color different from the background color. The drawn outline of the design is simply duplicated with rolled paper to match, and not always completely - perhaps only in areas where you want to add volume.
• Planar trimming is a classic for paintings and postcards, which was already discussed above. This is a traditional filling of any shape on a plane, and with the combination of all the shapes of the pattern, an even terry carpet of rolled paper is obtained. Due to the small size of the paper elements, all lines, contours and boundaries of the drawing are preserved, and the picture does not lose clarity and ideas.
• There is also a technique for volumetric trimming: the operating algorithm is similar to the algorithm for planar trimming, but paper twists are used to tightly cover a volumetric figure - a box, a figurine, etc. In addition to the fact that in this way you can give new life to an old thing, such a design idea allows you to create figures on a simple base from cardboard, plaster, clay, etc., “revitalizing” them not with a brush and paints, but through paper decoration. Here, the degree of twisting, the angle of inclination when fixing and the size of the paper parts often vary depending on what kind of shape needs to be put into paper. Moreover, the elements are not always attached with glue: for example, the plasticine base will independently hold the paper pieces, without additional means.
• The last option, which should be considered a subtype of any of the previous techniques rather than a separate method, is layer trimming. It involves gluing rolled paper blanks into each other, while simultaneously varying their size and density, which allows you to achieve very soft color transitions or realistic volume on a plane. All this affects the overall perception of the craft: the same green grass in the picture will look livelier and more natural if in shading areas it is made in a dark green shade, and in areas where the sun’s rays fall - in light green. You can use layered trimming for both contour and other techniques.

Trimming corrugated paper: pictures and ideas

On the Internet and magazines dedicated to needlework, you can find a lot of different pictures that will serve as the basis for planar or contour trimming, but sometimes you want something special, your own. If you have basic skills in working with graphic editors, you can draw the desired sketch on a graphics tablet, print it in a certain size and design it using the trimming technique.

Or you can do the same thing in Photoshop using brushes that represent a variety of elements - from basic geometric shapes to full-fledged details of nature, clothing, silhouettes, etc. You can also outline the contours of the future painting by hand, using a pencil - it will not rub and mark as much as a pen, especially at the moment of contact with glue. It is not necessary to make complex drawings: it is enough to simply indicate the shapes that will be filled in, or the contours that need to be duplicated.

If in other techniques - quilling, etc. - even simple elements looked quite impressive, then in trimming, paintings that have at least 4-5 details look much more interesting. Even if it is a simple sun, clouds, a house, an apple tree nearby and a wooden fence, then this is already a finished product, which, after filling it with paper rolls, becomes voluminous and alive, and also carries a holistic idea.

A single flower, decorated using trimming technology, will look no worse only if a volumetric technique is used on the originally constructed frame of this flower. But even here, bonsai and topiary are much more attractive: artificial flower trees. By the way, using the volumetric trimming technique you can even create a bridal bouquet from “artificial flowers” ​​or decorate a wedding table.

Creating corrugated paper is a great idea for an evening at home with the kids or even alone. Crafts made using this technology are distinguished by their special tactile softness and visual grace, and by combining several techniques at once you can get unusual, but very attractive paintings and sculptures.

The imagination of the masters knows no bounds. And what can you find on the World Wide Web! These include beautiful crafts made from ribbons and beads, topiaries of extraordinary beauty, and flower arrangements. However, the art of cutting from corrugated paper deserves special attention. What kind of technology is this? And how can you use it to create unusual crafts for your home?

What is trimming?

Crosscutting is an art that involves working with corrugated or any other paper. With its help you can make not just topiary and flower arrangements, but also real paintings. And the main thing is that thanks to this method you will get beautiful, voluminous, sometimes even “curly” images and products.

What types of trimming are there?

When working in the cutting style, you can find crafts made on both paper and plasticine. On paper, trimming can be of the following types:

• volumetric;
• contour;
• planar;
• multilayer.

What do you need to work with corrugated paper?

The technique of cutting corrugated paper is quite simple and does not require any special training. All you need is attention, diligence in work and imagination. With a skillful approach, even children can easily create unique works of art from paper.

So, to work with corrugated paper you will need the following tools and materials:

• several multi-colored rolls of paper;
• sharp scissors;
• glue (preferably PVA or food paste);
• a ballpoint pen refill or a wooden stick with a blunt end;
• a sketch or sample picture for further transformation.

How to make a beautiful topiary from corrugated paper?

If you want to make a three-dimensional figure, for example a topiary, then in addition to the above tools and auxiliary materials you will also need plasticine. We will describe below how the corrugated paper cutting method works.

How to make blanks for paper crafts?

Before you begin the creative process of creating crafts, you need to learn how to twist the so-called end tubes, or, more simply, blanks for future products. What is needed for this? To begin, take one roll of corrugated paper and start cutting small thin strips from it, up to 1 cm wide. Next, each strip should be roughly divided into small squares up to 1 cm wide and also cut.

After this, take a stick with a blunt end or a rod, lean it against the center of each of the squares and begin to gently squeeze the corrugated paper around the stick or rod. Thus, you will get end tubes, which will later play the role of a mosaic. This is exactly how cutting from corrugated paper occurs.

How does the principle of facing on a sketch work?

When you have a sufficient number of colored mini-tubes with somewhat fluffy ends ready, you can proceed to the next stage of work. To do this, select or draw a simple picture with a pencil, for example, it could be an image of a butterfly, flower, sun, chicken.

Next, the drawing should be treated with glue. Moreover, the technique of cutting from corrugated paper (you will find a master class in our article) involves pasting a blank pattern in two ways. The first is to apply glue to the center of the image one by one. That is, they put a dot of glue in one area of ​​the drawing, applied a ready-made corrugated tube, made a second dot, glued a second one, etc. Thus, the drawing is created using the dot method and goes from the center.

The second option involves gluing the external design of the sketch. First, a layer of glue is applied along the contour, and then several end tubes are immediately applied to it. After the base is created, the middle of the drawing is drawn up.

Trimming corrugated paper: master class

If you have already mastered working with small blank tubes, you can move on to a more difficult option - creating a three-dimensional craft in the form of a topiary. How to make it?

First, you need to decide what color the leaves on your mini-tree will be. Let's say you prefer the standard green color. What's next?

Next, it’s worth preparing a round base, which can be an ordinary Christmas tree toy. Also, the base ball for the crown can be made from plasticine. You can use a pencil as a tree trunk. Instead of a pot, use a plastic cup or coffee container. The main thing is now to fill it with plaster, paraffin or plasticine to securely secure the pencil barrel.

At the next stage, it is recommended to paint the trunk brown and the foliage green. And only after the paint has completely dried, corrugated paper is glued over the blanks. It is better to start pasting over crafts (trimming) of this type from the bottom.

And here, don’t forget to make a kind of carpet from small tubes that can decorate your plasticine, gypsum or paraffin base. After the bottom, start gluing the top of the tree with end-piece tubes. Let the product dry and, for greater attractiveness, decorate the topiary with satin ribbons and beads.

How to cover a toy with corrugated paper?

If you don’t want to paste over flat pictures and images, you can do something more, for example, create a unique three-dimensional figure. And cutting from corrugated paper will, of course, help with this. To do this, you will need an ordinary plastic or rubber children's toy, for example, it could be a duck or a bunny.

Next, prepare glue and a sufficient number of end tubes of a suitable color. For example, to create a voluminous and fluffy chicken, yellow or orange will suit you. Then glue the blanks one by one so tightly to create the illusion of fluff. And also start pasting over the figure from below. When finished, let the glue dry. The product is ready.

How to make a three-dimensional cactus from corrugated paper?

Corrugated paper cutting helps create unique decorative items for your home. For example, using plasticine and corrugated paper you can make a beautiful blooming cactus. To do this you need to prepare the following materials:

• multi-colored paper (yellow, red, blue and green);
• stick or rod for trimming;
• plasticine of any color;
• ruler and simple pencil;
• scissors;
• decorative cord.

At the first stage, make a small plasticine blank for the cactus base. To do this, take green and gray or black plasticine. Make a pot from black or gray plasticine, from green - the cactus itself, and from red - a model of the future flower. The approximate length of the product is about 7-8 cm.

Next, take blue corrugated paper and cut out a thin strip about 5 mm wide. Then wrap it around the makeshift pot. Cut green corrugated paper squares with sides of 15 mm. Then cut these squares in half so that you get small triangles. The next step is to wrap the triangles around a stick or rod and create end tubes.

Next, take the first tube and use a stick to attach it to the cactus base (do this near the beginning of the improvised flower pot). We attach the second and subsequent tubes side by side. In this case, you should end up with a dense row of trimmings that does not contain gaps. Next, repeat the entire process on the second, third and subsequent rows, moving up the cactus trunk. At the same time, we have already covered the base itself with blue paper, therefore, there is no need to trim it. So, you will get a dense “carpet” covering with dense weaving for the body of the cactus and an open area of ​​red plasticine.

Take yellow paper and cut out petals with a width of about 10 and a length of about 30 mm. Lightly gather them at the base and attach them to a red plasticine circle. You will get a yellow flower with a red center. Next, take red paper and make small 15 mm squares from it.

We crush them with a stick and cut them around the red center. Then we carefully move to the base of the middle and cover the red plasticine circle completely. As a spectacular addition to our flower craft, we take a decorative cord and tie it in two layers around an improvised flower pot. The craft is ready. This is exactly how cutting from corrugated paper occurs. Schemes for this type of creativity are not needed at all, the main thing is imagination!

In conclusion, we will say that trimming is a unique art that allows you to create unusual crafts from corrugated paper. At the end of the work, you get fluffy and voluminous products that can easily decorate your home or act as a spectacular birthday gift.

Trimming is an unusual way to make beautiful crafts from colored paper. It's hard to believe that even a preschooler can make these amazing paintings using the cutting technique. All you need for this is a ballpoint pen (or pencil), glue, corrugated colored paper and a little patience.

Download:

Preview:

To use presentation previews, create a Google account and log in to it: https://accounts.google.com

Slide captions:

Prepared by Elena Anatolyevna Nesterenko, Educator, MBDOU “Kindergarten” No. 17, Smolensk Master class “Cutting as one of the types of non-traditional activities in paper design”

What is trimming? This is a technique for working with paper that combines both applique and quilling. This method is very easy for children to master; they easily learn this type of creativity the first time. Using this technique, you can create beautiful three-dimensional works. The cutting technique can be used in joint and independent activities with children, in group work, as well as for parents who want to organize joint activities with children.

There are two types of trimming: - on paper (trimmings are glued to the base paper); - on plasticine (the plasticine base is laid out in trim pieces; they can be either three-dimensional or planar).

There are several types of work performed in this technique: contour (trimmings are laid out along the contour of the image, without filling the internal space);

Planar (the trims are located close to each other over the entire surface of the design).

three-dimensional (trimmings are glued at different angles to the surface of the sheet, which allows you to create a three-dimensional image

Multilayer (trimmings are glued into each other in layers, one inside the other).

Trimming on plasticine can be: Contour (trimming is laid out along the contour of the image, without filling the internal space).

Flat (the facings are located close to each other over the entire surface of the workpiece);

About three-dimensional (trimmings are glued at different angles of inclination to the surface of the product, which allows you to create a three-dimensional image)

The basis for trimming on plasticine is an image covered with plasticine or a three-dimensional figure made of plasticine.

To make crafts using the cutting technique, you need the following equipment: ❖ Crepe (corrugated paper) or napkins ❖ Plasticine or PVA glue (you can use a glue stick) ❖ Scissors ❖ A container for storing paper blanks ❖ “cross-cutting” tool – a long thin stick with a cylindrical blunt the end. ❖ Good mood. ❖ Base: thick paper or colored cardboard, velvet paper, three-dimensional forms, polystyrene foam, plasticine form, etc.

Composition Using the “cutting” technique, you can make collective compositions and panels, consisting of both individual works united by one plot: “White Birch”, and from individual fragments of one application, when everyone makes a part of the composition, and then all the parts are assembled into a whole panel.

Stages of work: If the entire process of trimming is described in stages, it will look like this: We make a blank for a three-dimensional product or draw a pattern on a flat surface.

Cut squares (1 by 1 cm) from corrugated paper.

We place the trimming tool on a paper square. Take a square in your left hand and a cotton swab in your right hand. Place a cotton swab in the middle of the square and twist the square tightly around the stick;

We crumple the paper and roll the rod between our fingers. We place each next trim next to the previous trim. We try to ensure that the ends fit tightly to each other so that there are no gaps.

Glue the end piece to the workpiece. We take out the rod.

You should cut squares of corrugated paper of the desired color, ranging in size from 5 mm to 2 cm, depending on the desired “fluffiness” and the volume of the cutting tool. The height of the created image depends on the size of the square. The larger the squares, the rougher the panel will look.

One secret If you want your drawing to be even, you need to fold the square exactly in half and wrap it around the shelf, you will get an even “edge”. If you need to make a fluffier “edge”, then close the paper corner to corner, you get a fluffy “edge”. This is a slightly different effect.

The work done using the trimming technique is very beautiful. They can be given as a gift or to decorate the interior. Handmade gifts are the most valuable. Create with your own hands. I wish you success in your work. All the best!