How to make a weapon out of paper? Making paper weapons using origami technique How to make ancient weapons out of paper

In order to make a gun out of paper, you will need two strips of different lengths.

1. Roll the strips along the wide side 6-7 times to obtain round tubes. One of the pipes will serve as the muzzle of our pistol, and the other will be its handle.

2. Bend the parts of the future pistol in half.

3. Take a short piece and fold its ends in the opposite direction from the holes.

4. Take the long piece and pull it through the short loop.

5. Our pistol is assembled.

How to make a revolver out of paper?

In order to make it from paper, you will need two A4 sheets.

1. Take an A4 sheet and fold it along the wide side 6-7 times to form a tube.

2. Bend the resulting tube in half.

3. Bend the ends of the workpiece with holes at an angle of 120 degrees.

4. The barrel of the gun and its handle are ready.

5. Fold a sheet of A4 paper in half and cut into equal parts. For the drum we only need one part. Take it and roll it along the wide side 6-7 times to get a tube.

6. This tube will serve as a drum for our revolver.

7. Wrap the resulting tube around the barrel blank with the handle several times.

8. Bend the ends sticking out in front inside the revolver and insert them into the slot of the revolver drum.

9. Fold the remaining part of the A4 sheet in half and cut it. Roll one part of the sheet along the long side into a tube. Roll the other part along the short side into a tube.

10. Insert the resulting tubes into the revolver blank.

11. The cowboys' weapons are ready.

How to make a gun out of paper?

In order to make a gun, you will need two rectangular sheets of different lengths.

1. Roll the strips along the wide side 6-7 times to obtain round tubes.

2. Bend the resulting tubes in half and iron the fold with your hand.

3. Take a long piece and bend part of it inward so that a protruding corner is formed. Bend the ends of the short workpiece at angles of 120 degrees.

4. Insert the ends of the long piece with the holes into the resulting loop of the short piece and pull them with a little force to secure.

5. The hunting rifle is done.

It's no secret that boys love to play war games; they always have soldiers, cars and, of course, weapons.

But the same gun can be easily made from paper. Here is an example of the simplest way to make a gun out of paper using the origami technique, without glue or scissors.

Fold a sheet of paper into stripes.

Bend it in the same way as shown in the figure.

The finished weapon looks like the photo below.

Materials needed to make a paper gun

To learn how to make a gun out of paper, follow the simple recommendations described below.

You will need:

• scotch;
• scissors;
• A4 paper.

Instructions for making a gun from paper

When everything is prepared, you can begin. How to make a hunting rifle out of paper? Let's look at this in more detail.

1. Roll the sheet into a tube and secure it with tape so that it does not fall apart. Make another tube of the same diameter.
2. Roll the sheet into a tube with a slightly larger diameter so that the previous tubes can fit into this one.
3. Insert sheets rolled into smaller tubes on both sides into the latter. Secure with tape.
4. Make another such long tube consisting of three sheets. Trim so that the length is the same and glue them together.
5. Now we need to make the butt. To do this, take two sheets of paper and cut out identical oblong trapezoids from them. Cover thoroughly with tape on all sides. Insert and glue the stock between the tubes.
6. Cover the stock with a new, flat sheet of paper to make it look nice.
7. Roll the two sheets into two separate thin strips. Form one into a circle. And fold the other in half and put it on the circle so that three centimeters are in the middle of the circle.
8. Insert this structure from below under the rifle. You guessed it, it will be the trigger.
9. You can also make a sight by twisting another strip into a circle and gluing it to the top.

That's all. Now you know how to make a gun out of paper. It's easy and fast. And boys will be interested to see the process of making weapons.

And here is another interesting scheme, thanks to which you can also make a gun.

Paper weapons that shoot

But many will rightly note that a gun that does not shoot is a very dubious and uninteresting toy.

Therefore, below are instructions on how to make a gun out of paper that shoots. This task will be a little more difficult, but playing with such a gun will be much more interesting.

You will need:

• colored paper of your choice;
• White paper;
• scotch;
• hot glue.

Let's make a shooting weapon out of paper together

See how to make a gun out of paper.

Load the bullets into the top hole and pull the trigger. Here's a toy. Well, so we figured out how to make a gun with our own hands from paper.

There are many different schemes and ways to build a weapon out of paper, and even one that shoots. Start with the simple ideas suggested by origami, moving on to more complex techniques. This way, you can collect a whole arsenal at home and play with a large group until you get bored.

And such activities are also useful for children, because they develop hand motor skills and accuracy.

I don’t want to deny the popularity of origami at all. Almost everyone can learn how to make paper crafts. And, probably, there is no person who has not folded a paper boat or airplane at least once. All these simple models can be considered the first steps in mastering the art of origami.

Those who are interested in such things have most likely asked themselves the question more than once: “How to make weapons and more complex fakes out of paper?” After all, such a souvenir can be made right in front of the child, and then together we can engage in the most interesting transformation of a completely flat sheet of paper into three-dimensional shapes.

The simplest pistol

It is believed that various fakes, or rather their production, are great for spending time with children. The child will develop motor skills and imagination. It also promotes attentiveness and perseverance.

For a boy, it is quite possible to do simple origami for the first time. A paper weapon, such as a pistol, is made of two parts.

To do this, you need to bend the rectangular sheet in half. Its right and left sides bend inward. The procedure for folding the sides is repeated two more times. Then the same actions are performed with a square-shaped sheet.

After this, the weapon handle is made from the first element. The form is folded in half, unfolded and divided into three parts. The right piece bends down 90°, and the same thing happens with the left piece. The components of the parts are put together and the result is a handle.

The trunk itself is a former square sheet of paper. It is connected to the handle, and the paper origami “Weapon” is ready.

A sophisticated paper gun that can shoot

Origami "Pistol" is great entertainment and relaxation at the same time. The activity itself is available to anyone, anywhere and is super economical. You can use it to keep yourself or your child busy, for example, while waiting in line to see a doctor.

For this you will need paper and nail scissors. As for the paper itself, it is better to use cardboard. It is more durable and will not deform so quickly. But, in principle, any paper is suitable for origami.

And yet, how to make a weapon out of paper? This problem can be solved by reading the step-by-step instructions.

The process of making origami "Weapons"

First, the A4 sheet is folded lengthwise several times. This is the barrel of the future product. Then the pistol grip is made in the same way. It should be a little wider.

Both pieces are smoothed out and the smaller piece is superimposed on the larger one. The lower workpiece is divided in half visually. Alternately, the right and left sides are bent towards the center of the product. After this, the part is folded towards the center again.

Use scissors to make a small hole at the base of the pieces. The new sheet of paper is turned towards itself with the short side and folded to its middle. The resulting part is the trigger. The part of the sheet that is not used is cut off. The element itself is folded in half and pushed into the gap, which is made at the handle.

The halves of the thin workpiece are threaded into the pockets that are formed at the wide part. The edges are folded carefully to ensure even corners. If necessary, excess is trimmed off the trigger.

Then another sheet of paper is taken. Its width is the width of the handle. The last edge of the paper weapon model is folded inward. It can be glued with tape to obtain a smoother and more beautiful pistol handle.

Finally, the last sheet is taken and the same actions are performed with it as with the trigger. The first edge of the manufactured part is bent to the left so that the corner remains outside. This corner is cut off. The blank is threaded into the back of the barrel - and the gun is ready.

In order for the weapon to be fired, a rubber band for money is put on the barrel and bullets are made from paper.

Weapons of real ninjas

The art of origami makes it possible to make not only flowers, boats and airplanes from paper. It can be used to make various types of weapons, such as the “ninja star”.

Shuriken is a type of throwing weapon. It was used by legendary ninjas. By the way, they were quite seriously interested in mysticism and therefore applied various mysterious signs and hieroglyphs to their weapons. All this helped them in battles. Ancient hieroglyphs can also be depicted on these paper weapons. Then the child will certainly not remain indifferent.

Scheme and assembly process

To work, you only need one sheet to make a paper weapon. Its diagram is needed for better and more understandable assembly.

The paper is folded in half. Along the line where it is folded, it is cut into two strips. Each piece is bent lengthwise. Then, following the origami pattern, corners are made on the elements.

The result is two mirror components. The left one is turned over to the other side and overlapped with the right one. The triangular shapes of the bottom piece are then tucked under the center edges of the top pieces.

The figure turns over. The same actions are performed with the remaining seven corners. After these steps, the question of how to make a weapon out of paper can be considered closed. After all, shuriken is also a weapon with a very interesting and long history.

Samurai knife

In addition to shooting weapons, you can make a samurai knife. Kunai is a tool originally from Japan. In its shape it is somewhat similar to a fish. Quite widely used on the farm. But if the need arose, it was used as a formidable throwing weapon.

This craft is created from ordinary paper, and if everything is done carefully and accurately, then the question of how to make weapons from paper will definitely not arise.

The process of creating an original knife

First, two elements are made of paper. Excess ends can be removed with scissors. Stationery supplies allow you to make a more accurate cut on a product such as a paper weapon. The diagram will help you avoid getting confused during the assembly process.

The square sheet is folded diagonally. The resulting triangle is folded in half. The figure turns to its original position. After this, each of the corners is folded so that the edge can coincide with the fold line at the center.

The part is folded in half along the central fold strip. The ends of the paper are tucked into a pocket on one side of the folded element. This is the edge of a knife.

After the part is completed, the handle is made. To do this, fold a sheet of paper diagonally, then make a flattened tube out of it. It is then connected to the “blade” itself. The corners are folded towards the center and secured with tape for a stronger connection.

Finally, the final touch is made: a round ring on the knife handle. It is attached, and the origami toy can be used.

Children can also be involved in the work, so that later, if they want to make such a product, they will not have the question of how to make a weapon out of paper. And if desired, the child can always do crafts on his own or with friends.

Origami as a small achievement in art

Each, even the simplest model, is a small achievement in mastering the art of paper origami. Schemes (weapons, for example) are used to more clearly implement various models.

To engage in this type of creativity, it is not at all necessary to spend a lot of money, because all you need is paper. At the very beginning, it may seem unrealistic and very difficult. But in fact, the activity is very exciting, and if you use certain patterns and rules, origami will perhaps turn into a favorite hobby for the whole family.

The Japanese ninja weapon “shuriken” is made using the classic origami technique, that is, the basis for creating the figure is a paper square. And when making crafts, no scissors or glue are used. If you follow the step-by-step instructions exactly, then even beginners will be able to please yourself and your loved ones with the original origami shuriken.

The article describes in detail how to make paper edged weapons yourself using a diagram, video and photo master classes.

The child will be interested in assembling simple origami weapons and feeling like a Japanese warrior. The shooter can throw shuriken as many times as he likes, but nothing will happen to this flying star if it is done step by step, according to the instructions described in the article.

Shooting shurikens while playing ninja is safe because they are made of paper. And not a single toy gun will cause as much childish delight as having fun with home-made shuriken. As a result, the child receives a double benefit: he develops through the creation of origami and gains the opportunity to play fun.

Step-by-step instruction:

1. Taking a square of paper, bend it in half, unfold it and, using a ruler, divide it into equal parts, as in Fig. 2, paragraph 1.
2. Connect the vertical sides of each part to each other, carefully press them in the center with a ruler (Fig. 2, point 2).
3. Fold the resulting 2 identical pieces as in Fig. 2, item 3: mirror (relative to the vertical center), bend it twice in opposite directions - the short edge of the part to the longer one.
4. You get 2 blanks (Fig. 2, item 4).
5. Then they are placed one on top of the other and connected so that the corners of one part are placed in the pockets of the second.

Rice. 2:

Video: Origami shuriken

Transformable throwing disc

The ability to combine templates allows you to make double and eight-pointed Japanese ninja stars. In the photo fig. Figures 1–2 show examples of complex compositions built from the required number of throwing and combat paper discs.

Rice. 1:

Rice. 2:

Step by step execution:

1. Prepare two identical large squares, each of which divide into four smaller ones. This way you will receive blanks for eight identical modules.
2. Fold each square and unfold it along two diagonals, as well as connecting the opposite sides. This way the center of each square will be clearly marked.
3. Take 1 prepared square, connect two corners of one of the sides in the center, along one of the planes of the sheet.
4. Align the corners of the remaining side by bending the center line inward. Get a diamond-shaped rectangle. This is done with the rest of the blanks - squares.
5. Each of the eight rectangles is connected to the previous one, in stages, by bending small corners inside the next one. For clarity, watch the video with a detailed master class.
6. As a result of alternately connecting the parts, a shuriken - transformer is obtained. For greater effect, do it in contrasting colors (photo in Fig. 3).

Rice. 3:
Another diagram:

Video master class on creating a transforming shuriken

Paper firearms

Let's look at the assembly diagrams for the main ones: a pistol, a revolver and a shotgun.

Use the templates and make a gun that shoots. For “cartridges” we recommend using paper balls.

Video: Origami firearms

Origami diagrams for assembling weapons

Paper crafts are ideal for spending time together with your child. He develops fine motor skills and imagination. Below we will tell you how to do some of them.

Making a gun

The picture shows a diagram of the gun and instructions to follow. Cardboard is best for a gun. Find a model of the future toy, try to find a well-drawn image. Make a preliminary template from plain paper, using double paper for the “left” and “right” sides of the gun. After making the template, transfer it to cardboard and cut it out. Now let's make the gun fire. To do this you will need a thin elastic band. Cut the rectangular side that is parallel to the end of the trunk. You need to bend this side inward and pull the elastic band onto the trunk, making cuts on the sides. The cartridges are made of paper in the shape of balls. In order for the gun to fire, you need to pull the rubber band with your thumb. The gun can be decorated, the child will like it.

Simple pistol

Take a rectangular sheet, bend it in half, and bend the right and left sides inward. Repeat this procedure 2 more times. Now take a square shaped sheet and repeat the previous steps. From the first sheet we will make a handle. Fold the form in half and unfold it, divide it into 3 parts. Bend the right side down 90 degrees, repeat the same with the left side. Place both pieces together. The handle is done!
The barrel came from a square sheet. Connect it to the handle. The pistol is ready.

Shuriken

Shuriken is a weapon of Japanese ninja. Boys will really like this toy. Take 2 sheets in the shape of a square. They need to be bent horizontally. Having straightened them, bend the two halves of the sheet towards the center so that they mirror each other. After which you need to bend the corners diagonally (they need to be bent on 2 sheets in different directions). You will receive a blank that looks like two triangles. Place the pieces one on top of the other. By threading the corners of the first into the pockets of the other part on both sides, you will receive a shuriken. Good luck!