Fashionable DIY hair clips. How to make a hair clip? For DIY hair clips we will need New Year's clips: choose the right ones

Materials and tools

- light synthetic fabric: acetate silk, organza, tulle, voile, crepe-satin in two colors - for flower petals and for leaves;
- metal base for the flower - automatic hairpin;
- a small piece of felt to match the color of the leaves;
- a glue gun or other universal glue (preferably one that glues metal);
- a needle and thread in two colors to match the color of the petals and leaves;
- a strip of corrugated paper to match the color of the leaves;
- soft wire, about 30 cm long (you can use beading wire);
- a small piece of double-sided adhesive pad (available at fabric or craft stores);
- satin ribbon matching the color of the leaves, 5 mm wide and about 1 m long.
- scissors, candle.

From the fabric for the petals we cut into squares with sides 3x3 cm, 4x4 cm, 5x5 cm, 6x6 cm - 5-7 pieces for each given size. The result will be approximately 20-30 squares. The more blanks, the more magnificent the flower will be.

From each square for the petals we cut out figures in the form of truncated droplets or hearts - without a sharp tip. Look at the photo:

In the flame of a candle, carefully melt each petal.

As the fabric melts, it becomes deformed, and we get petals that look like real ones!

We start sewing the flower from the middle, from the smallest petal. To do this, we twist the petal into a tube and stitch it at the base with matching threads.

Gradually add and sew new petals in a circle - from the smallest blanks - to larger ones, forming a flower.

Making leaves. We cut out rectangles measuring 9x4 cm from green fabric. We plan to make 3 leaves, so we will prepare 6 rectangles from the green main fabric and 6 rectangles from the adhesive double-sided interfacing. We also need wire - three pieces of approximately 10 cm each, corrugated paper in the form of a long ribbon 1 cm wide.

We wrap each of the three pieces of wire with corrugated paper - we form the basis for the leaf. Glue the ends of the paper.

We form a sheet by folding the blanks together (like a sandwich): green flap + gasket + curved wrapped wire + gasket + green flap.

We glue this “sandwich” together by ironing it with a heated iron through dry gauze or a thin white sheet of paper. The double-sided adhesive pad melts under the iron and holds the fabric and wire frame together. We cut out the leaves from the rectangle, melt their edges over the candle in the same way as we did the petals earlier.

We make “bows” from a satin ribbon, stitching the centers with threads to match the color.

We put the leaves together and sew them together, attaching bows. Glue the flower to the leaves. After the glue has dried, you can additionally sew the leaves and flower together for a strong connection.

Glue a piece of felt onto the base of the hairpin. It is better to do this in advance so that the glue has time to dry. Glue the flower to the hairpin. We follow all gluing instructions written on the tube! - so that our flower stays firmly on the hairpin and does not deteriorate when worn. Leave for a day for the glue to dry.

The hairpin with a voluminous flower is ready. Our rose turned out beautiful, spectacular - just like a real one!

- for: nylon or satin ribbon in two colors - 10 pieces of one color and 5 of another. The length of the segment depends on the width of the tape. With a width of 2.5 cm - length 7 cm, with 3.5 (3.8) cm - 8 or 9 cm, with 5 cm - 10 cm. The wider the ribbon, the larger the flower;
- for the bandage: satin ribbon 2.5 cm, approximately 50 cm long;
— elastic band 2 cm - cm 10;
- scissors;
- needle with thread;
- bead or rhinestone for decoration;
— burner/lighter/candle.

So let's get started. If you have a burner, then use it to cut the tape into pieces of the required length (depending on the width of the tape), at the same time singe the edges so that they do not fray (photo 1). If you don’t have a burner, then cut it with scissors and burn the edges with a lighter or over a candle flame. These are the petal blanks we got (photo 2).

We fold the ribbons at an angle of 90 degrees so that there is an equal distance from the edge of the ribbon to the corner (photo 3). Fold it again, connecting points A and B marked in the photo. It should look like photo 4 (view of the wrong side). Photo 5 - side view. We string the petal onto a thread and a needle. We start from the front side, make 2 stitches (photo 6).

In this way, we collect five petals in a circle and tighten them (photo 7). View from the front side - photo 8, view from the back - 9. We make two more of these flowers, collect all the tiers of our flower using thread and needle or glue (photo 10, 11). We decorate the center of the flower with a bead, rhinestone or a beautiful button (photo 12).

Take a satin ribbon for a bandage. Having stepped back 2-3 cm from the edge, we make an incision and singe the edges (photo 13). We insert an elastic band into the cut, sew across the length of the tape and along the edges, without catching the elastic along the dotted lines marked in photo 14. We do the same on the second side, turning it right side out (photos 15, 16).

We bend the edge of the satin ribbon under the elastic and stitch it without catching the outer layer of the ribbon (photo 17). This is what should happen on the front side - photo 18. We do the same on the second side of the elastic, this is how the bandage turns out - photo 19. Determine the place where the flower is attached and sew it on.

The American bow is a voluminous bow with many intricate curls. Such a bow is usually made from grosgrain ribbons of different colors and different widths. When looking at the American bow, it seems that making it with your own hands very difficult. In fact, this is not so, because this design consists of several different bows assembled together. So, let's try to figure out how to make an American bow with your own hands.
, ribbon bow. American bow
This complex hair clip is made from a large number of ribbons of different widths. To create the bow itself, take a ribbon that contains some kind of pattern or just polka dots. The background ribbons can be plain or contain a motif that emphasizes the design of the main bow ribbon. The ribbons themselves must be made of rep.

To create an American bow we will need:

Rep ribbons.

For the main bow you will need three ribbons of different widths (it is better that the width of the widest one is no more than 3-3.5 cm). For the background, 3-4 types of ribbon on which the bow itself will be located can be from 1 cm to 2.5 cm wide. This is not fundamentally important. The only important thing is that you arrange them harmoniously, but more on that later;

Scissors;
Cardboard;
Needle and thread;
Glue;
Pin, clips;
Lighter.

To create an American bow, we need to learn how to make its famous curls. We will use a special template that we will create ourselves. Take a regular piece of cardboard 15x7.5 cm.

Cut a line exactly in the middle, 0.6 cm wide and about 3.8 cm long (a little more than half).

We will need three such templates of different lengths. Each is 2.5 cm smaller than the other, but the width remains the same. I got templates with lengths of 17.5 cm, 15 cm and 13.5, respectively.

Prepare a 2.5 cm wide ribbon, a pin, a clip, a needle and thread and a template. We begin to form a bow.

Using a clamp, secure the tape at the edge of the template, on the side where the slot is located.

Wrap it around the template twice. Insert a pin through the template, into the center of the tape, to secure it (as shown in the picture above).

Carefully remove the tape from the template without removing the pin.

The next step is a very important part in creating the American bow. Hold the ribbon with the tail up and fixing the center of the ribbon, where the pin is located, with your fingers we begin to separate the turns to the sides so that we get something X-shaped.

Pull the stitches until a uniform "X" is formed. When you look at the back of the bow, the ribbons should be aligned horizontally.

Using a thread and a needle, make several stitches exactly in the middle of the bow. Make sure it doesn't lose its X shape.

Pull the thread tightly, wrap it several times and secure with a strong knot.

Using the same technique, make 2 more bows, but with templates of different sizes.

The next part of creating an American bow is creating the background, such “spikes”. To form it, you can take ribbons of any width, for example 3.8 cm, 2.5 cm and 1.5 cm wide. Cut each 12.5 cm and make a V-shaped cut at the ends, which is immediately sealed using a lighter.

Take 2 ribbons of the same color, place them crosswise and pierce the middle with a needle.

Do the same with the rest of the ribbons, placing all the layers on top of each other. Thus, organize a beautiful background for the bow and give it an X-shape, as shown in the photo. When all the ribbons are in place, sew tightly right in the middle and tie them with thread.

These are the parts we should end up with. Now they are all ready to come together and create an American bow.

The American bow hairpin is ready! All that remains is to attach the middle in the center. But I leave this decision up to you.

Attach the base on the back side. It could be either an iron “crocodile”, or a small automatic hairpin, or an elastic band, or... Your option.

Beautiful hair clips can transform any hairstyle - the more original the hairpin, the more interesting the hairstyle looks. The most original, unusual and unique hairpins are those that made by hand. Let's try to make an interesting hairpin from ribbons in a retro style.

Materials:
metal hairpins,
4 mm wide tape of any color
hot glue gun.

Instructions:

You need to take a hairpin and 60 cm of ribbon. The middle of the ribbon cut is placed at the base of the open clip. Then you should pass one edge of the tape through the middle, but through the outside. Repeat with the second ponytail too.

This weaving continues along the length of the entire decoration. After this, a tight knot is tied at the end.

This is what the hairpins looked like before.

But we won’t stop there and will make them more modern and sophisticated. The remaining tails of the ribbon are twisted and the flagellum is folded in half, forming a spiral cord.

And now we have in our hands excellent hairpins, made by ourselves in retro style!

You will need the following materials:

- two sushi chopsticks (sold in any large supermarket);
— brown acrylic paint;
- a small piece of fabric with a beautiful ornament;
- decorative thin cord approximately 10-15 cm;
- PVA glue and brush.

How to make a hairpin. Master Class.

1. Cut the wooden sticks so that their length is approximately 18 cm. Cover them with brown (or black) acrylic paint and leave to dry.

2. Lubricate the upper part of the stick with PVA glue. Now wrap each stick with cloth (see photo). Fold the raw edges of the fabric, glue along the fold and attach to the stick.

3. Apply glue to a small area of the stick below the fabric (about 1 cm), and wrap it several times with decorative cord. Secure the ends of the cord well with glue.

That's all, our oriental style hairpin is ready.

How cute little girls look in beautiful dresses and with delicate flowers on their heads! It turns out that such a cute decoration as an openwork flower can be easily made with your own hands.

To create such a cute headband for a girl, you will need a minimum of effort and free time, but despite this, it will look great and will be a wonderful addition to any little fashionista’s outfit.

Headband with a flower for children, handicraft masterclass:
For work you will need: lace, a piece of felt, a beautiful button or bead, elastic lace or a wide elastic band, and for older girls you can take a regular plastic headband, scissors and a glue gun.

Using hot glue, glue the gathered lace onto the felt circle: start from the edge and move inward in a spiral.

Glue a bead or button into the middle and glue the finished flower onto the base.

That's all: the wonderful headband for the little princess is ready! Isn't it easy and simple?

More ideas

You need to choose New Year's decorations for your hair now, so that in the pre-New Year's troubles you don't miss such an interesting part of your image. Women are interesting people; they always want to decorate, decorate, change something. Hairstyle is a considerable field for fashionable experiments, especially on the eve of such a magical holiday as the New Year. The Fire Rooster is a symbol of the coming year according to the eastern calendar; it loves everything bright and shiny. We offer decor options for hairstyles in the style of a fiery bird.

New Year's headbands

Perhaps the headband is the most unpretentious of all the variety of items for decorating styling. It doesn’t matter at all what color and length your curls are. A variety of feathers, beads, stones and flowers transform a prosaic headband into a real work of art. Modern fashionistas can not only buy a headband in a store, but also design it with their own hands. Ideas for every taste:

Headband with felt. Based on an old hoop, you can make all sorts of hair accessories for the New Year. To do this, buy white and blue felt, cut out snowflakes, circles for a snowman, and hearts from it according to a pre-prepared template. Attach neutral-colored blanks to the rim, and then place everything on glue.

Feathers. When choosing feathers to decorate your hoop, remember that this material cannot be overdone. You can easily turn into a New Year's peacock. Therefore, use glue to place 2-3 feathers on the base. You can complement them with beads and rhinestones.

Tourniquet. The master class for making this New Year's decoration is quite simple. Tie several flagella into a knot, measure the length of the hoop on the rope and cut off the excess. Glue the tied rope to the rim and hide the edges with pieces of tape.

Decor with stones. Suitable for hair of any length. Place the stones on the felt base the way you want. Sew them on, alternating with beads and seed beads. Attach to the hoop and glue the blank. Finish the reverse side with a piece of leather or any thick fabric.

Tiaras for the New Year

The tiara was a symbol of majesty in the past; now it characterizes the owner as a special lady. Choosing a hair decoration for the New Year in the form of a tiara requires taking into account a number of features of its wearing and styling.

Scallop tiara. Attached to a high hairstyle using special teeth. Often there are not enough teeth to firmly fix it in the drip tray. The invisible ones come to the rescue. You need to choose them to match the color of the strands.

Tiara-hoop. No additional means for fastening are required. The main thing is that the volume of the headband should correspond to the size of the head. On short hair, the tiara should be placed in the center of the hairstyle, so all attention will be drawn to the beautiful accessory.

Tiara in Greek style. New Year's hair accessories in the Greek style act as decoration and fixation of curls. Openwork curls, beads, flowers are located along the edges, and when put on they appear on both sides of the head at the temples. By securing several strands around the tiara, you will add antique chic and romance to the image.

Diadem on the forehead. This hair decoration for the New Year will be suitable for a girl to create a gentle princess look. The tiara is attached to a ready-made hairstyle without disturbing its integrity. Beautiful decor, descending from the hairline to the forehead, favorably emphasizes the solemnity of the image. The main thing is that the size of the tiara must clearly correspond to the volume of the head, so as not to slip with every movement.

Stylized kokoshnik. An interesting hairstyle decor option was created based on Russian folk costume. The kokoshnik is made from brass, but despite the metal base, it does not put pressure behind the ears. This accessory has a variety of uses. From creating a modern Russian look to everyday wear with elegant dresses and pantsuits.

New Year's hairpins: choosing the right one

There are so many options for hairpins for the New Year that it is very easy to get confused in their diversity and choose the wrong option. Remember the basic rules for choosing fashionable hair decoration.

The color of the hairpin should match the color scheme of the outfit. You can choose a hairpin to match the dress, or you can choose a contrasting color to correctly place color accents. If you have an interesting hair color, for example, then choose a bright red color for your decorative item.

With different face shapes, the same accessory looks completely different, and not always attractive. Any variation is suitable for an oval face, but for chubby beauties it is better to choose several small stilettos. You can complement the image using.

There are plenty of materials for making hairpins: wood, plastic, metal, kanzashi-style fabric. The choice is purely based on personal preference. Any hairpin will look beautiful on thick hair. If you use it before decorating your hair, the result will exceed your expectations.

The cost of a hairpin is determined by the type of material from which it is made and its exclusivity. Handmade products are much more expensive, but you will be sure that there is no other similar decoration in the world. Some accessories are decorated with precious stones, and instead of a hairpin, you can easily buy a small apartment. But any lady, even with an initial level of training, can design hair decor with her own hands. Fortunately, you can find many master classes (mk) on the Internet. In this case, the price of an exclusive item will decrease significantly.

New Year's hair decorations will help every woman add some zest to her look. with the use of fashion accessories it will acquire a magical uniqueness. With the help of the right decor, the magnetism that beautiful women's hair possesses will only increase.

Video: Master class on making simple and beautiful hair accessories for the New Year

Jewelry made from beads looks very delicate and feminine on your hair. You can wear them with a festive outfit or wear them every day to add romance and sophistication to your look. Jewelry made from beads can be quite modest and delicate or truly luxurious - a lot depends on which beads and model you choose. By the way, you can buy beads for decoration specifically or use one or more of your beads that you no longer intend to wear.

You can make DIY hair bead jewelry in several ways. Here is a selection of master classes of varying complexity.

Method 1: Beads + glue

By “planting” beads, rhinestones, crystals on glue, you can decorate a headband, a large or small hairpin, a “crab”, a comb, and so on. Using strong glue, you can glue the decor directly onto the hairpin/headband, or first decorate it/him with fabric, suede, or leather.

Advantages of the method: speed of production, the ability to use beads without holes, unlimited possibilities for creating patterns and designs.

Note: You need to act carefully with glue so as not to stain the base of the decoration with it and maintain a neat appearance of the work.

Hairpin decorated with crystals: master class

You will need:

Metal hairpin without decoration;

A piece of artificial or natural suede or leather;

Durable glue and a stick for applying it;

Possibly tweezers.

Sequence of work:

1. Glue a strip of suede to the hairpin, tucking the edges inward.

2. Glue the beads to the suede pin one at a time (small beads may require tweezers). Let the glue dry and you're done.

Photo and source: psimadethis.com

Hair comb decorated with beads and rhinestones: master class

You will need:

Plastic or metal comb without decoration;

Beads and rhinestones for decoration;

A piece of felt;

Strong glue or glue gun;

Scissors;

Thread and needle.

Sequence of work:

1. Cut out an oval, rectangle or other shape from felt that matches the size of the base of your comb (or a little larger).

2. Glue beads and rhinestones to the felt one at a time, creating an abstract composition or an orderly pattern.

3. When the pattern is ready, trim off the excess material around the edges.

4. Sew the decor to the scallop and secure with glue to be sure. Let the glue dry and you're done.

Method 2: Beads + fishing line or thread

By stringing beads of different sizes onto a thin fishing line, you can create beautiful compositions for decorating hairpins, combs, headbands, and so on.

Advantages of the method: Great opportunities for creating patterns and designs, the ability to use a variety of braids, metal elements for jewelry, embroidery elements, the opportunity to use your beading skills.

Note: Only beads with holes are suitable for such jewelry.

Comb decorated with braid and beads: master class

You will need:

Plastic or metal comb without decoration with a narrow base;

Decorative figured braid in the form of a stem with leaves;

Metal leaves for jewelry;

Suitable beads of one or more types;

Thin fishing line and needle.

Sequence of work:

1. Sew a piece of decorative braid to the base of the scallop with fishing line.

2. Add metal leaves and beads on top. Try to secure each decorative element quite firmly.

3. At the end, secure the line well from the inside out. Ready!

Photo and source: lovemaegan.com

Hair ribbon with beads: master class

You will need:

Three types of pearl beads;

Thin line;

Scissors;

Satin ribbon.

Sequence of work:

1. Cut the fishing line about 1 m long. String 6 beads onto the middle of the fishing line, as shown in photo 1. Pass the fishing line twice through one of the small beads.

2. String 2 beads on both ends of the fishing line and secure them by passing the fishing line through a small bead (see photo 2).

3. Continue weaving as shown in photos 3, 4, 5. Having made the decoration of the desired length, securely fasten the fishing line and trim the ends.

4. Tie a satin ribbon to the ends (it is better to treat its edges with fire or hot scissors so as not to fray).

P.S. By the way, this jewelry can be worn as a choker or bracelet.

Photo and source: lc.pandahall.com

Hair decoration made from strings of pearl beads: master class

You will need:

Small metal comb;

Invisible;

Four types of pearl beads;

Thread or fishing line and a thin needle;

Strong glue or glue gun.

Sequence of work:

1. Tie a thread to a comb, string several beads of the same type onto the thread.

2. Tie another thread to the comb and string other beads onto it. Do the same with the third thread and the third type of beads, and with the fourth, respectively.

3. Gather the ends of three threads and tie them to the “crown” of the bobby pin.

4. Glue several beads to the base of the comb, masking the threads. Ready!

Photo and source: clonesnclowns.wordpress.com

Method 3: Beads + chains

Hair jewelry with beads can be assembled from a variety of jewelry blanks in the same way as is done when making bracelets, necklaces, beads and other jewelry. You can buy chains and other decorative elements specifically, or you can use unnecessary beads and jewelry.

Advantages of the method: quick results, excellent appearance of jewelry.

Note: you need special materials and tools (at least thin-nose pliers, also possibly wire cutters and pliers).

Hair decoration made from pendants and chains: master class

4. Add a pendant to the side chains, placing them in the middle. The decoration is ready.

From today's master class you will learn how to very quickly and easily make a beautiful hair clip that will become a worthy decoration on New Year's Eve or Christmas.

To make it you will need:

metal hair clip;
silver decorative leaf;
brown tape;
red stamens;
silver beads on a string;
red, white artificial berries;
fishing line;
glue gun

Select a leaf of such a size that it extends beyond the hairpin. Leaf color may vary. But in accordance with it, you will need to select the rest of the decor. The main thing is that you can attach the leaf by its spine to the hairpin.

We apply glue to the upper part of the hairpin, not reaching the rise, which we take with our fingers to open the clip. We immediately attach the leaf along the ridge to the metal surface. Additionally, we tie the leaf to the hairpin with fishing line exactly in the middle. The line should pass between the teeth of the hairpin and the feathers of the leaf. We tie a knot on the outer surface, as it will be possible to hide it with decor.

Take the red stamens and cut them in half. We cut the wire into two lengths of 10 cm and 7 cm. We begin to wrap it with brown tape, weaving in the stamens. The threads on which the stamens are located should not be visible. There should be one piece at the end of the wire.

We will give these branches a spiral shape. Each one needs to be wound onto some thin object. This could be a long toothpick or a brush handle. Adjust the curls yourself. One branch can be completely twisted, and the second is simply wavy.

Now let's create a composition on our silver sheet. We attach a sprig of red berries, then cover it with prepared brown sprigs on top. To make the composition three-dimensional, we straighten them in different directions at an angle of 45 degrees.

Using silver beads on a thread, we form a knot several times. We cut it, leaving short ends, and attach it to the composition. Thus, we cover the inner part where the fishing line and the ends of the branches are located.

We form a small bouquet of berries on a wire. We connect all the others with one wire. The other tails must be twisted in the same way as the branches with stamens were formed.

We straighten the spirals and attach the bouquet in the same direction as the entire decor. Finally, we cover it with the same silver knot, which will complete the entire composition.

How nice it is to appear at a party with your hair decorated with a fashionable hand-made accessory, namely, a hairpin made with your own hands, and in such a way that everyone around you is literally “dying” with envy! It's just a matter of small things - how to make a hair clip?

The New Year is literally knocking on the door, which means that children's matinees and adult parties begin! What unites all ages? Of course, the desire to please and look exclusive!

Surely you would like your little one to go to the party with a beautiful hairstyle, which would include a hairpin that would be ideal for her outfit, and even one of a kind! And this can only be achieved in one way - by making a hairpin with your own hands!

Show your imagination, and it is quite possible that after you make a hairpin for your daughter, inspiration will come to you and you will create something amazing for yourself!

Instructions for making jewelry

In order to make fashionable hair clips with your own hands, you will need a lot of decorative material and a base for the clips (if you can’t buy them at a craft store, buy cheap clips that you don’t mind breaking).

How to make a hair clip for a girl? Everything here is very simple: you probably still have some scraps of beautiful fabrics. Guipure, organza, and bright chintz, which is best starched, are suitable.

Prepare cardboard patterns of flowers and petals, which need to be attached to the fabric and traced with a pencil;
Assemble a flower from several fabrics, lay a large flower down, a smaller one on top, and the smallest one even higher;
Make holes in the layers and bring out wires or thick fishing line from bottom to top, on each end of which put a bead and fasten it with glue (super glue, “Titanium”);
Place a large bead in the middle; if there are leaves, glue them under the flower;
According to the shape of the base of the hairpin, cut a piece of contrasting fabric so that you can glue it to the base, tucking the edges.

After the background is glued to the base, attach the flower, also with glue or by sewing it on. The hairpin is ready! When making it, you can use the same shades of fabric that were used in the child’s New Year’s outfit.

It is even easier to make such a hairpin from ribbons:

Ribbons, beads, feathers - everything will come in handy!

A wonderful hairpin can be made from a piece of satin or satin ribbon. To do this, take the base for the hairpin, a piece of tape of such length that when assembled it completely hides the base (you can make several smaller elements and attach them in one line). After the decorative elements are ready, attach a fluff and a large bead in the middle of each of them in a contrasting color. Attach everything to the base, spray with hairspray and sprinkle glitter around the edge, spray again. The hairpin is ready!

A hairpin made of lace will look very elegant and delicate. She will immediately highlight a real lady!

For manufacturing you will need the following materials:

Cotton lace (width – 7-10 cm, length – 40 cm);
Satin ribbon of delicate cream color (length – 40 cm);
Artificial pearls – 10 pieces (diameter – approximately 0.2 cm);
Gold button (medium size);
The base is a hairpin to which decorative elements will be attached;
Wire – 2 pieces (2 cm long).
For the work you will need matching thread, a needle, scissors and glue.

Make a hairpin as follows:

First, the lace is cut into two strips and sewn together, then the resulting part is turned inside out and the seam is straightened.
Next, the two straight edges of the lace part are sewn together and gathered in the center, giving the shape of a bow.
You also need to make a thin bow from a satin ribbon. This element must be attached to the center of the lace bow and tied with wire.
Wrap the center of the bows once with a piece of satin ribbon and sew on the wrong side.

Sew a button into the center of the bow. Embroider the lace bow with pearls. The exquisite hair decoration is ready.

You can make fashionable hair clips with your own hands from feathers, leather and rhinestones. The skin needs to be attached to the base, so that it looks most organic, feathers need to be attached to it, after placing beads on the base of the feather, large beads, rhinestones and fluff should be glued between the feathers. Such decoration will not be embarrassing to show at the most important party!

If you have the skills to work with thin copper wire, you will certainly be able to create an amazing vintage hairpin - it requires a base or clip, a roll of wire and beads or small transparent beads. To secure the beads, you need to thread two wires through them and twist them on both sides - the shape of the pin can be any, but a star or an unusual flower looks very beautiful. The flower is attached to the base of the hairpin using wire or glue.

Nowadays kanzashi jewelry is not losing its popularity. In order to make your own hair clip using this technique, you will need a base for the hair clip, a colored satin ribbon, and beads for decoration. Suitable materials to help create jewelry include tweezers, a pin, scissors, a needle and thread (or glue).

First, cut out the number of squares needed to create a hairpin from the ribbon. They need to be folded in half, and then in half two more times.
Cut off a corner of the tape and scorch it (it’s best to do this with a burning candle).
From the tape, cut out the required number of petals in the same way as squares, and connect them together using thread or glue.

Decorate the elements cut from the ribbon with rhinestones and attach them to the base.

What other materials can you use to create hairpins?

Choose:

Sequins;
Bugles;
Buttons;
Beads;
Artificial flowers (you can buy them or make them yourself, for example, from salt dough);
Lace;
Braid;
Decorative stones.

The bow hairpin is suitable for both a child and an adult lady, provided that the materials are slightly different. For a child, choose a bright satin ribbon and contrasting guipure - for example, fuchsia-colored satin and white guipure. Roll them into bows, fasten them with a large bead, and surround the bead with small beads. For yourself, you can choose dark gray satin and white guipure, fastening them with a beautiful exquisite pearl! Agree that if you complement such a hairpin with a string of pearls and pearl earrings, you will look like a real lady!

And if you are a real needlewoman, then you can create a whole ensemble for hair decoration in the form of a bracelet, earrings, or ring. Your original image will definitely be noticed!