Beaded wreath for the New Year. Master class crafts New Year's product Christmas beading Christmas wreath beads glue tape magnets wire Bead pattern wreath with New Year's socks
Christmas is one of the most favorite holidays along with the New Year. Many families around the world are looking forward to this evening. If you want to make a special gift for your loved ones with your own hands, try weaving an original Christmas wreath with traditional funny socks from beads.
A wreath like this is a unique opportunity to make a symbolic gift for Christmas with your own hands. This craft consists of a pair of socks, a bow and green branches gathered into a wreath.
To weave the product, prepare:
- beads number eight. In total you will need four colors: orange, white, green and blue;
- yellow bead (diameter six millimeters);
- wire (diameter 0.25 millimeters);
- thin fishing line and a beading needle.
The first item for a Christmas wreath will be a pair of socks. They are made using the parallel beading technique. Take a piece of wire, forty-five centimeters long, and string twelve pieces of orange beads onto it. Following him are thirteen more. Place this bottom in the center of the segment.
The tip from the side of the set of twelve beads, insert thirteen (from the second end).
In the process of tightening the weave, try to ensure that the beads are located in the center of the segment. As a result, you get the first two rows of beads.
Third row: collect twelve orange beads and pass the second end of the wire through them.
I'll tighten the weaving. Place the third row formed. over the previous one.
The fourth consists of ten beads of the same shade. Here you will need to pass the second tip into the first seven of them. Don't touch the other three for now and slow down the process.
Fifth r. - a low one of seven pieces and insert the second tip into it. Tighten the plexus.
All remaining rows of the sock are made in the same way. The number of beads in rows six to ten inclusive is seven. From the sixth to the eighth - orange, then - white.
To complete the sock for the Christmas wreath, you need to fix the wire, that is, pass either end through all the beads in the previous row. Then twist them together. Do not cut off the remaining part; you will need it later when assembling the entire wreath for Christmas.
The second sock is woven in exactly the same way. Only at the end, through the previous row, should you stretch the second wire tip in such a way that the ends after twisting are directed in the opposite direction in relation to the first sock.
Next, a bow is woven for a wreath for the Nativity. It uses blue beads and a yellow bead. The length of the wire is thirty-five centimeters. Collect a bead and twenty pieces of beads of the main color. Move the bottom to the center so that the bead is located in the middle.
Guide the wire tip from the side of the bead set back into the bead and pull it out until it stops.
On the second, the next twenty blue beads are collected and the wire is pushed back through the bead. After tightening, a bow gradually begins to emerge.
Now string the next twelve blue beads onto any wire, hold the last one and pass the tip back into the remaining eleven. Push all the beads tightly against the bow and tighten the process. The result is the first part of the tie. On the second wire, make the same second part. All that remains is to twist a couple of wires together and the bow is ready.
After the bow, a wreath with branches is made for Christmas (a pair of socks will be attached to it in the future). To create it, take a fishing line one hundred and fifty centimeters long, consisting of thirty-eight flowers. The wreath itself is a chain in the form of a kind of spikelet. How such a detail is woven can be seen in the following photos:
You can make a wreath from a chain in this way: connect the chain into a circle by the edges (the number of elements in the chain must be even). So, to connect, pass the needle with the working line into the first of the flowers at the beginning. The sequence is as follows: three white beads, and then all seven green beads and in the opposite direction three white beads.
Pull out the working line and the ends will move closer to each other.
Next, pass the needle into the adjacent bead from the last flower in front of the white beads.
When finished, pass the needle through three white beads of the second flower from the beginning of weaving.
Having pulled out the fishing line, each of the ends are connected to each other.
To secure the ends of the fishing line, insert them into a couple of beads on different sides and tie a knot. The excess can be trimmed off.
All the main components of the Christmas wreath are ready. All that remains is to assemble the product together.
A pair of socks is folded into a cross. The ends of the wires are twisted together. Leave the remaining 0.5 centimeters free.
In the area where the wire is attached to the wreath, a bow is screwed on. Trim off any remaining ends.
This completes the weaving of the wreath for the Nativity. Instead of a pair of socks, you can also weave bells.
Another master class with a video example will tell you about weaving a Christmas wreath. Such training is the easiest and fastest way to learn how to make this kind of crafts.
With the arrival of winter, we most often begin to think about the approaching favorite New Year holidays. There are so many pleasant chores ahead: coming up with a festive, special menu, preparing souvenirs, interesting thematic compositions and figurines for room decoration, purchasing gifts. You can start decorating your home in advance to bring the holiday atmosphere into the house and please the children.
Today’s article will tell you and demonstrate to you how to make New Year’s crafts from beads with your own hands. For the New Year and Christmas holidays, you can make interesting compositions, such as a Christmas wreath, a star for a Christmas tree, or original Christmas tree decorations made of beads. Try making such products with the whole family using the master class presented in this material. As a result, in just a few evenings you will get your own original New Year's beaded toys and wonderful holiday souvenirs and gifts.
Traditionally, during the New Year holidays, the doors of apartments and houses are decorated with a Christmas wreath. We are all accustomed to the fact that these compositions mainly consist of green Christmas tree branches with New Year's toys. This master class offers you an interesting idea, where a similar New Year's wreath is woven entirely from beads interspersed with autumn berries on it.
The color of the beads can be changed at your discretion, thus embodying your original ideas that will help you create unique New Year's bead decorations for decorating your room.
We begin the master class with an analysis of the materials and tools that we will need to weave a New Year's Christmas wreath with our own hands.
To weave leaves, prepare:
- rounded beads No. 11 and triangular beads No. 9 in suitable shades;
- copper wire No. 24 or 26 (115 meters long) and No. 30 (about 35 meters), respectively, in color for the selected beads.
For berries:
- round beads, the same as for foliage (one piece - one berry);
- beads (four to six millimeters in diameter) of an autumn tone with pearlescent tints;
- wire number 30 (about eighty meters).
Other materials:
- copper ring – 20.3 centimeters in diameter;
- green wire No. 30 or the wire required for assembly under No. 28 in a silver shade;
- brown floral ribbon (if you chose green as the color of the main material, then choose the ribbon to match it).
Pointed leaf weaving pattern
So, in order to make a Christmas wreath, you first need to weave the leaves. The approximate total number of such blanks is 150 pieces.
Beading of one branch with leaves occurs according to the French circular technique for weaving leaves with a pointed shape. This is one of the simplest weaving techniques, which is suitable even for beginners.
Having made three similar blanks, they need to be placed one on one on the front side with sharp tips up, as in the photo. We twist the wire bases together, thus forming a stem. Next, you need to fan out the resulting part and give the foliage the desired look with your own hands. This is done by bending them slightly outward in the center. The first part is ready. In a similar way, you will need to make forty-eight similar branches.
At the next stage, the master class moves on to creating berries for a New Year's craft. Make the number of such elements at your discretion. To start beading, prepare pieces of wire No. 30, 21 centimeters in length. We collect one bead on them, move it to the middle of the segment and fold the wire in half. Next, you need to straighten the ends and squeeze them together, as in the photo.
The next step is to thread the ends of the wire through a bead with a diameter of four millimeters and move it close to the bead. At the base of the bead, the ends are tied into a knot and gradually twisted together with your own hands. As a result, you should have a smooth wire leg. According to a similar pattern, continue weaving and form the remaining berries.
Now, you need to distribute the berries into forty-eight clusters. All clusters are held together by twisting the stems of the berries together. The height of such stems can vary at your discretion.
We attach each of the brushes with berries to a randomly selected branch with leaves and twist the wire bases into one thick stem. Please note that at this stage, as a result of twisting, the stem comes out quite thick, so for convenience we advise you to use pliers, which will facilitate this process.
Having completed the weaving process, we proceed to assembly. To finally form the Christmas wreath, take a copper ring and wrap it with floral tape.
Using spool wire or assembly wire, you need to attach the first branch with foliage to the ring. We place the leaves in the middle. Next, you need to wrap the ring to hide the wire base of the stems. If desired, the stems can be made shorter, which will greatly facilitate the process and help you assemble the Christmas wreath faster.
The next step is to attach the second branch to the ring. We place it 1.5 centimeters below the first. The leaves bend with their own hands to the left. We hide the sections behind the floral ribbon.
Next, we attach the third branch at a distance of 1.5 centimeters from the second. Here the leaves bend to the right, and the wire is hidden behind the floral tape. In the photo you can see what the reverse side of the product looks like.
Using a similar method, we continue to sequentially attach branches with foliage in increments of 1.5 cm, according to the following scheme: in the center, on the left, on the right sides, on the left, on the right sides. Using this method allows you to uniformly fill a Christmas wreath with foliage in a circle, the circumference of which is 61 cm. As a result, the resulting foliage is enough to cover the entire ring with woven blanks.
To evenly arrange the branches with leaves along the ring, divide the workpieces into four or two parts and close the ring proportionally with quarters or halves.
This concludes the beading and master class. You can show your own imagination and add interesting details to this Christmas wreath. These can be figurines of angels, balls, snowflakes and other New Year's crafts made of beads.
Christmas tree cones
The next master class will look at the process of weaving cones, which can turn into themed Christmas tree decorations, simple figurines or holiday gifts.
Let's consider the materials and tools needed to carry out this beading:
Instead of an oval bead, you can use a dried acorn of suitable size.
Take sparkles and brown beads. We make two cones out of them, starting from the top. Next, you need to take a thread about a meter long and put 24 beads on it. We collect this bottom into a ring and leave a free tip of 25 cm. We fasten the thread. Next, you need to move three beads away from the unused tip and string a sequin on the convex side, seven pieces of beads and another sequin, but on the other side - the depressed side.
The next step is to thread the needle through the fourth bead from the thread in the initial ring and in the opposite direction through the sequin and the final bead (as in the diagram). We string six pieces of beads and a sequin (from the pressed side) onto the thread. We pass the needle through the bead of the initial ring (a quarter of the previous sequin) and then into the sequin and the final one strung.
We make the next three similar arcs from beads with sparkles, just like the second one. We string five pieces and pass a needle through the beads under the first of the sequins, then through the sequin, the beads above it and in the opposite direction into the sequin and the bead under it.
The thread is brought out in the center of the initial arc and threaded through three beads here and the scale row is completed.
We make the next five or six similar rows. We string beads with sparkles for the next arc and thread the thread into the bead located in the middle of the adjacent arc in the previous row. Pay attention to the diagrams, which show the weaving process step by step.
At the next stage, you need to insert the bead into the resulting case of sparkles at the bottom.
Next, we make a row with three sparkles. The thread is threaded into the middle bead of the adjacent arc. We collect a bead, shiny material from the convex side, three beads, a sparkle (from the depressed side) and a bead. The needle passes into the middle beads of a pair of adjacent arches and into the final bead and shiny material.
Next set: three beads, shiny material on the concave side and another bead. The needle passes from the middle bead of a pair of subsequent arcs and in the opposite direction through the bead and sparkle. We string the next three things and push the silt into the shiny element and the bead from the initial set in the row. We tighten the lower part of the cover, threading the thread through the beads located in the middle in the arcs of the final row (this is a dotted line in the diagram). The thread is fixed and cut.
We take a needle and thread it with the thread that was left at the initial stage of casting in the upper part of the cone. We collect a shiny element from the pressed side and one bead. We thread the needle into the sequin in the opposite direction through the center in two adjacent arcs. We fix two shiny parts in a similar way and insert a thread into the initial sparkle in this row. After this, the thread is threaded with three beads on top of the sequins (dotted line in the diagram). All that remains is to tighten, secure and cut the thread.
Let's begin the process of weaving needles.
We prepare a wire of a little more than one meter and string the main material. Fold it in half and collect glass beads. This will be the first pine needle. We collect glass beads and beads on any of the ends and move them towards the initial coniferous part. The wire is threaded in the opposite direction into the glass beads. In a similar way, we alternately perform these coniferous elements on each of the tips. In total, you need to make about forty similar parts. The wire is folded in half and twisted. It is necessary to cover the remaining piece of wire with coniferous parts, leaving ten centimeters at the ends. Leave these needles without twisting.
Take the next piece and thread it through the bead located in the cone. We collect a bead of a brown shade and insert the active tip through the bead in the opposite direction (as in the diagram). If you decide to use an acorn instead of beads, the wire is attached to the case. It is necessary to make ten to fifteen coniferous parts on both sides of the cone. The wire with the needles is twisted. Next, the next bump is attached. We make coniferous elements almost to completion.
We put the resulting elements together and twist four wire pieces and needles. Along the free ends we collect one brown bead of large and small sizes. We thread the wire through large-caliber beads in the opposite direction. Twist the ends with the twig and remove unnecessary parts.
This composition with pine cones can decorate New Year's gifts or become a wonderful Christmas tree decoration.
Star made of beads and wire
Finally, I would like to offer you a simple master class for beginners, where an example of creating an exclusive New Year's star with your own hands is considered. Such figures will attract special attention to the tree under which the gifts are hidden.
The main emphasis in this example is on the manufacture of the product frame. Here, with your own hands, you need to give the correct shape and form the desired bend for the New Year's star.
For weaving, use beads of different shapes, shades and sizes. Prepare a copper wire of medium diameter and thinner, which is used in beading. Also, do not forget to prepare pliers and pliers.
Let's prepare all the details for work and begin creating the star. Take a thick piece of wire, fold it in half and twist it. It turns out to be a kind of braid. At the final stage, one of the ends is secured in a vice, and the other is twisted with pliers. After this, form the shape of a star from these elements, the rays of which should be the same size.
Using pliers, you need to make a loop at any of the corners and twist the ends of the wire. The result is small curled tails.
At the next stage, using beading wire, we wrap the entire surface of the New Year's star. The result is a solid foundation for the next step. Now, on the same thin wire, we make a string of beads of different shapes, colors and sizes and wind the resulting part over the entire surface of the star. At the end of this process, the ends of the wire must be fixed and hidden inside the figure.
Colored beads against a background of copper material attract the eye, and your star will not go unnoticed. Based on this master class, you can make figurines, products and gifts of various sizes. When creating a large star, carefully wrap the workpiece with wire so that there are no voids left in the composition.
Video: Making a New Year's wreath from beads
The most logical New Year's bead decoration would be a snowflake. There are an incredible variety of patterns for beaded snowflakes: from the simplest for beginners to incredibly complex ones, consisting of several tiers. As a connecting element, you can use fishing line, wire, thread, as well as pins and the most common glue.
#1 Quickly made snowflake from beads: make Christmas decorations with your own hands
For those who have absolutely no time to prepare, a snowflake made of wire and beads would be an ideal option. To create such a masterpiece you will need: wire, glue or thread (for fastening the wire), beads or beads. Cut several identical pieces of wire (3 or more), fasten them in the middle (with glue or thread), and string beads onto the free ends. The snowflake is ready!
#2 Quick snowflake made from pins and beads: DIY New Year’s craft
For such a snowflake, it is best to have in your arsenal not only beads, but also other beads of different sizes. You will need: pins, fishing line, beads of different sizes, scissors and glue. Below see step-by-step photo instructions.
#3 Master class from beads: making a snowflake for the New Year with your own hands
So, let's complicate our product. This snowflake has its own manufacturing pattern that must be followed. You will need: fishing line, scissors, beads and beads. See below for a detailed diagram of the snowflake.
#4 Snowflake made of beads: master class with step-by-step photos
For beginning craftswomen, this New Year's snowflake pattern will be a great start. The tools you will need are: fishing line, scissors, needle, beads. It is better to take beads in two colors, so the craft will look more impressive.
#5 DIY snowflake made of beads for the New Year: diagram
To make such a craft, you will need several types of beads: this way the snowflake will look incredibly realistic. See below for a detailed diagram with bead sizes.
#6 Bead crafts for beginners: snowflake pattern for the New Year
To make such a snowflake you will need beads of different sizes and colors, as well as fishing line. A detailed beading diagram is described below; the diagram also shows the sizes of beads that should be used in making this New Year's craft.
#7 New Year's bead craft: DIY snowflake pattern
And another unusual pattern for a New Year’s snowflake that you can bring to life with your own hands. A detailed diagram is described below indicating the sizes of beads required for the craft.
#8 Snowflake pattern made from beads: making New Year’s crafts from beads
Another quite simple, but at the same time charming snowflake pattern from their beads. You will need fishing line and beads of different sizes and colors. A detailed manufacturing diagram is shown in the photo below.
#9 Beadwork: snowflake pattern
Any needlewoman can make such a charming craft. It might be a bit difficult for beginners, but nothing is impossible. Below is a detailed diagram that will help you master the beading technique.
New Year's Angels made of beads
An angel is rightfully considered another symbol of the New Year and Christmas. You can make cute angels from beads, and then decorate a Christmas tree or house with these beautiful crumbs. You can give an angel made of beads as a gift to people near and dear to you so that it protects and helps.
#1 Simple angel made of beads and wire: master class with step-by-step photos
A very simple angel that even beginners can make. It will take about 10 minutes of your time and your cute beaded angel for the New Year is ready! See the step-by-step photo master class below.
#2 New Year's angel made of beads: making crafts for the New Year with your own hands
Another variation of bead crafts on the theme of angels. The pattern is quite simple. You will need: wire, scissors, beads and beads of different sizes, a chain or ribbon. Below see step-by-step photo instructions for making the craft.
#3 Angel made of beads: making New Year’s crafts with your own hands
A more complex version of a Christmas angel made of beads. You will need patience and experience in creating masterpieces from small glass beads. See the step-by-step master class with photos below.
#4 Cute angel made of beads and beads with your own hands: diagram
Here is another diagram of an angel made of beads and wire. Very similar to option number 1, but there are small differences that make the craft more realistic. See the photo below for the diagram.
Christmas tree made of beads
The most important attribute of the New Year holiday, without which it is simply impossible to imagine it, is the New Year tree. If for some reason you do not have the opportunity to acquire a large green beauty, you can replace it with a miniature Christmas tree made of beads. Here you will find master classes on making a Christmas tree from beads for both beginners and beadwork professionals.
#1 Simple Christmas tree made of beads and wire: New Year's crafts from beads for beginners
Even a child can handle this New Year’s craft. By the way, beads develop fine motor skills well, which is useful not only for children, but also for adults! Step-by-step instructions with photos are given below.
#2 Christmas tree made of beads: making crafts with children
Another option for a simple New Year’s craft that you can do with your children. The Christmas tree will turn out bright and cheerful if you use beads of different colors and sizes. See the step-by-step master class below.
#3 We make a Christmas tree with our own hands from beads and glue
This craft can become a very original decoration or even a gift. You will need glue, construction paper and scissors. Draw the silhouette of the future Christmas tree on paper. Then carefully glue the beads along the contour. wait until it dries and cut out the finished product. The work is painstaking, but if everything is done correctly, the result will be indescribable beauty!
#4 Beaded tree: master class on making a Christmas tree
A miniature Christmas tree made of beads will be an excellent decorative element. To create it you will need two types of wire, a lot of green beads and red beads of a slightly larger diameter. See the photo below for a step-by-step masterclass.
#5 Beadwork: masterclass on making a Christmas tree for the New Year
From beads you can make such a cute Christmas tree pendant, which, by the way, can be hung as a toy on the New Year tree. You will need wire, green beads, white and orange beads. See the step-by-step masterclass with photos below.
#6 Making a Christmas tree from beads with your own hands: diagram
You can also make a small Christmas tree in this way: You will need a toothpick or other thin stick, beads and fishing line. According to the pattern, weave several cross-shaped bases with a round hole in the center. The bases must be of different sizes. Next, string them onto a stick, starting with the largest ones. The top can be decorated with beads of a different color.
#7 Christmas tree made of beads: masterclass + photo
Let's complicate the task. In this masterclass you will learn how to make a Christmas tree from beads and wire. For this craft you will need wire and beads of two colors (green and white). Make each branch separately, and then twist them together and get a fluffy Christmas tree. Detailed photo instructions are given below.
#8 DIY beaded Christmas tree pattern: making New Year’s crafts
Another Christmas tree pattern made of beads and wire. Additionally, you can use multi-colored beads of different sizes, which will look like Christmas tree balls. The diagram is described in detail in the photo below.
#9 DIY mini Christmas tree made of beads and beads
Miniature Christmas tree made of beads and beads. Suitable for more experienced craftsmen. A detailed diagram is shown in the picture below.
#10 Christmas tree made of beads: master class with step-by-step photos and diagram
Another version of a Christmas tree made of beads and wire. At first glance, some of the Christmas tree making workshops in our article are similar. And indeed it is. They are similar, but the execution techniques are different. Experienced craftsmen will immediately notice the difference, but for beginners we recommend that you strictly follow the instructions and carefully study the MK.
#11 Christmas tree with beads: masterclass with photos
This version of the green beauty is a little simpler than the previous one, but in general the manufacturing scheme is similar. You will need fishing line, green and white beads, and step-by-step beading instructions.
#12 Christmas tree made of beads: step-by-step masterclass
For the most experienced needlewomen we offer a master class on making a Christmas tree from beads. Very painstaking work awaits the craftswoman when creating such a masterpiece. Each branch is made separately and then wound onto the main stem. See step-by-step photo instructions below.
See also:
Other New Year crafts made from beads
For the New Year, you can make other crafts from beads, for which you have enough imagination. Well, what are the New Year holidays without gifts, Santa Claus, pine cones, sweets, wreaths, stars? All this and much more can be made from beads with our step-by-step master classes.
#1 New Year's bell made of beads: master class with photos
A beaded bell would be an excellent New Year's decoration. To create it you will need wire, beads and beads, scissors, a safety pin, chain or ribbon. See step-by-step MK with photos below.
#2 Peppermint candy made from beads: doing beadwork for the New Year
You can also decorate a New Year tree or interior with themed mint candies made from beads, which we know well from Hollywood films. The weaving pattern and step-by-step master class are shown in the photo.
#3 New Year's gift made of beads: making crafts with your own hands
A craft gift will look very symbolic as a decoration. You will need wire, beads and beads of different sizes. Master class with step-by-step photos, see below.
#4 Santa Claus made of beads: diagram and master class
Well, what would a holiday be without a kind old man delivering gifts? Here we will make a bourgeois colleague of our Santa Claus. The scheme is simple, suitable for beginners. You will need red black and white beads.
#5 Master class on beadwork: making a New Year's cone from beads with your own hands
Well, what is a Christmas tree without pine cones? Now we will tell you how to make a bead cone with your own hands. To do this, you will need a foam oval blank, brown or golden beads, and fishing line. For beginners, such a craft will be difficult: they will have to spend a lot of time and effort. But experienced craftswomen will love the New Year's cone made of beads. See the step-by-step masterclass below.
#6 Master class: weaving a Christmas wreath with beads
Usually the front door is decorated with Christmas wreaths, sometimes they are also hung on the wall to create a festive atmosphere. But you can make a small wreath of beads and use it as an element of New Year's decor. See beading instructions below.
#7 DIY beaded Christmas wreath: MK with photo
There can be a great many variations on the theme of a Christmas wreath made of beads. Having gained a little experience, you will be able to generate ideas for patterns on your own, but for now, take note of our crafts and patterns.
#8 Beaded wreath for the New Year: master class on beadwork
Well, the most complex version of a beaded wreath. You will have to try, but the result will exceed all expectations. With such a craft, there is no shame in going on a visit, taking a wreath as a New Year's souvenir.
You may be interested in:
#9 Beaded star: do-it-yourself New Year’s craft masterclass
You can make such a cute bright star with your own hands using our step-by-step master class. You will need wire and beads of different colors and sizes.
Bead jewelery
It’s worth preparing thoroughly for the New Year: you need to decorate not only the Christmas tree or the house, but also your loved one. You can make incredible themed decorations with your own hands from beads and illuminate everyone around you with a good mood. By the way, you can make identical jewelry for friends, sisters, or mother and daughter. In general, turn on your imagination and go ahead - create!
#1 New Year's snowflake pendant: making decorations with your own hands, MK
It is relevant during the New Year holidays, and in general with the beginning of winter, to wear handmade themed winter jewelry. You can make this snowflake pendant from beads with your own hands following the instructions in our master class.
#2 New Year's pendant Christmas wreath: master class on making
A pendant in the form of a Christmas wreath will also look relevant on the eve of the Christmas holidays. You will need beads of two colors and fishing line. You can hang the pendant on a cord or on a chain.
#3 DIY New Year’s snowflake earrings made of beads: step-by-step master class with photos
New Year's holidays are just around the corner, which means it's time to think about dressing for the holiday itself. It would be nice to appear at a gala evening in a unique handmade jewelry. With the help of this MK you can create beautiful themed winter earrings with your own hands.
#4 Simple, quick and easy beaded earrings: diagram + step-by-step photos
If you don’t have time, but you really want a handmade themed decoration, you can make these simple earrings in the shape of snowflakes. You will need: wire (6 identical pieces), beads or beads. For one earring, take three pieces of wire and twist them in the middle to form a solid six-pointed structure. String beads onto the ends and secure. Add a hook and the earring is ready!
#5 DIY beaded earrings for the New Year: step-by-step instructions with photos
You can make these cute earrings in the shape of fir branches yourself using our detailed photo instructions.
#6 DIY beaded Christmas deer earrings: MK with photo
You can make funny earrings in the shape of deer from beads with your own hands. The scheme is very simple, even beginners can handle it. But such a product looks very funny, and most importantly - thematic!
#7 DIY earrings in the shape of a New Year’s wreath: weaving pattern
Beaded jewelry can be diluted with additional decorative elements, for example, ribbon, as in this master class. The result is an original product, which you can’t even tell that it took just over 10 minutes to make!
#8 Bead decoration: making flat earrings with your own hands
To make gift-shaped earrings you will need three types of beads and wire. We weave the base from square flat beads. Bugles and small beads will be needed for the bow. See the step-by-step master class below.
#9 DIY beaded jewelry: Tutorial on weaving earrings
And here is another variation on the theme of beaded earrings in the form of a Christmas wreath. You will need beads of two colors (green for the base, red for decoration), fishing line and our diagram.
#10 Beaded earrings: DIY mistletoe leaf, MK + photo
Earrings can also be made in the form of mistletoe leaves. The scheme is incredibly simple, so novice craftswomen can safely get to work. See the photo below for a step-by-step masterclass.
A beaded brooch will also become a themed New Year's decoration. In this master class you will learn how to embroider a beaded brooch in the shape of a bullfinch. You will need beads of four colors, stones for the eyes and chest, and rhinestones for decoration.
#12 Bead embroidery: making a New Year's mask with your own hands
You can embroider a New Year's mask with beads. To do this you will need a blank openwork mask. And then embroider it to your taste with beads of different colors.
Beaded crowns
For the New Year, you can make chic beaded crowns for little princesses. Small glass beads look like real gems for the New Year's holiday, a small snowflake or princess will look unique. In addition, a beaded crown can be made together, keeping the child busy and the mother happy!
#1 Master class on how to make a crown from beads: the crown of the Snow Queen
You can make a real Snow Queen crown with your own hands from beads and seed beads. The work is painstaking and will require a lot of effort and time from you. However, the result is worth it: see the step-by-step master class with photos below.
#2 Snowflake crown made of beads: MK + photo
You can make a headband with a snowflake for a small snowflake, which will look like a real crown. See below for a detailed diagram and step-by-step master class.
#3 How to make a crown from beads and beads: MK princess crown
Detailed diagram for making a princess crown from beads and seed beads. Treat yourself and your little princess with a handmade product.
Help us improve: if you notice an error, select a fragment and click Ctrl+Enter.
We need free time "+" "-" 1 hour, dragon glue, you can use a hot gun, a satin ribbon, green and large red beads, you can have small beads and not necessarily red, thin and thick wire that holds its shape well, and You can also use a suitable ring or magnet.
And so let's get started. We twist a ring out of thick wire, tighten the loops as much as possible, but do not make them very flat, because a magnet will be attached to them.
The loops should be located close to each other
If there is not enough wire, you can grow it, or you can make several, just connect them later during assembly. Here is an option for splicing wires; the tails are visible in the photo (I left them specifically for the photo). How to grow a wire. We connect the two ends of the wire, twist it to the last loop and twist it between the loops. We put beads on the resulting wire again and make loops.
When the process of casting loops is completed, we proceed to winding our ring. We fix the free tail and begin to wind it around the ring in a spiral. As we work, we tighten our winding a little for density.
This is what it looks like. What's the piece for? For those who did not grow the wire while casting on the loops. When the piece is over, wrap the free end completely. Press for density and...
Let's expand on the next part. We apply the first loop to the already wound loops and wrap the free tip first, and then only the tape with loops.
This is how it should turn out.
Now let's make the flowers. Take the wire and large red beads again. We collect a lot of beads again, and then twist them one by one
We make a cluster of three beads in between and again a cluster of 3 beads...
We twist each cluster as in the photo.
This is what should happen.
