Big kinder surprise made of paper: we use papier-mâché techniques, cut and fold. How to make a large “Kinder Surprise” from paper Making a Kinder Surprise yourself

To surprise your baby for any holiday, you need to turn on your imagination ☺️. An original option would be to present a gift in a very large Kinder Surprise egg, made with your own hands. This craft is empty inside and you can put various sweets or a toy in it ✨️.

Homemade kinder surprise made from paper

✔️ In this version, the egg is made from a ball that needs to be covered with paper. For gluing, you can use PVA glue or prepare a homemade paste.

To prepare the paste, you need:

Mix 1 tbsp. l. corn starch and 2 tbsp. l. tap water.
To stir thoroughly.
Take half a glass of boiling water and pour it over the mixture.
Stir and put the mixture on fire.
Stir continuously until thickened.
Remove from heat and stir a little more.
Refrigerate before use.

You can first add water to PVA glue.

To make a huge egg you will need:

printed inscription;
water;
balloon;
A4 paper;
newspaper;
PVA glue;
paints (gouache);
water;
to prepare the paste, starch or flour;
brush.

Steps to make an egg:

The balloon is inflated to the required size and tied with thread so that it can be untied later.
To make it more convenient to work with the ball, it must be placed in some container.
Apply the first layer, which consists of water and paper. The paper is cut into small squares. Then dip each square in water and place it on the ball. This is how the entire surface is covered. All actions must be carried out at a fast pace, as the water dries quickly and the sheets of paper will begin to fall off. Instead of paper, you can use newspapers. Then the ball is covered with white paper last.
After the entire ball is covered, you need to let it stand for 5 minutes to dry.
The next layer consists of glue or homemade paste and paper. The ball is generously coated with adhesive and a second layer of paper is glued on. In order for the paper to be well saturated, you need a lot of glue or paste.
Next, the future egg is also generously coated with glue and a third layer of paper is glued on.
Leave the egg overnight to dry completely. It is best to dry near the radiator.
After the paper has completely dried, the stage of removing the ball begins. To do this, the tail is untied or cut off, and then the ball is carefully removed. The resulting hole must be sealed.
The next day, three layers are glued again and dried again.
Then you should paint the egg: to do this, draw a wavy line on the lower part with a simple pencil, and then paint it with red gouache. The upper part is painted white gouache. Instead of gouache, you can use acrylic paints or water-based emulsion. It is worth adding PVA glue to gouache paints, then the paint will not crack or stick to your hands while it dries.
Next step: make an inscription. You can print it on a color printer or draw the letters yourself and color them. In your own performance it will look more real. You can attach a piece of paper to the monitor and trace the letters. Then cut each word and glue it individually.
Next, a “door” is made in the egg. Its shape can be square or round. Cut with a stationery knife. Inside is filled with a gift.

You can write the child's name on the egg or stick your favorite cartoon characters on it, or you can make it in the form of a smiley face or mmdms. By applying varnish the surface can be made glossy.

Huge egg made of plaster and paper

This version of the egg will be stronger and smoother.

To create a kinder you will need:

printed inscription;
water;
balloon;
A4 paper;
newspaper;
PVA glue;
paints (acrylic);
water;
to prepare the paste - starch or flour;
brush;
gypsum;
sandpaper;
for a magnetic door: magnet, cardboard;
putty or self-hardening clay.

Manufacturing steps:

The balloon is also inflated, covered with paper and dried. The description is given in the previous method. Pasted in three layers.
After the workpiece has completely dried, the balloon bursts and is removed through the hole. The hole is sealed.
Next comes the priming stage. For this, putty or plaster is used. The layer should be applied evenly.
After the putty or plaster has completely dried, the stage of making a hole in order to put the gifts is carried out. The hole will be a door that can be removed. A stationery knife is used to cut it out.
To make it possible to remove the door, a magnet is glued into it, and the top is sealed with paper in several layers. Cardboard is glued into the base, then a magnet is placed, and paper is placed on top. Gluing is done using PVA glue.
The egg and door are sanded with coarse sandpaper. This gives the egg perfect smoothness.
After sanding, pits and depressions appear on the egg. In those places where they are deeper, plaster is re-applied, time is waited for drying and sanded with fine-grain sandpaper.
Next is the painting stage. Waves are painted in the lower part with red acrylic paint, and the upper part is painted white. Then the inscription is printed on a color printer, each letter is cut out and pasted onto the “kinder”. It is also possible to write letters with a simple pencil and paint them with colored acrylic paints.

✔️ This gift, created with our own efforts, is suitable for any holiday ✨️ . It will be original and unusual. Not a single child will remain indifferent to him. Any gift can be placed inside such an egg: sweets, toys, etc. This egg with a gift can also be presented to an adult.

Video instruction: Do-it-yourself Kinder surprise

Good afternoon If you have decided to make a big kinder surprise with your own hands from paper, or even from chocolate, then we are like-minded people. I’ve been thinking about this for a long time, watching the eyes of the younger generation light up at the sight of this wonderful and tasty gift.

I have already surfed the Internet and collected the necessary information. All you have to do is read the article, prepare the necessary materials and get down to business with me. Let's imagine for a moment the children's delight at a mega surprise, and the process will go like clockwork. Well, are you ready? Then get down to business and good luck to us!

Master class on how to make a large kinder surprise out of paper with your own hands

Are you familiar with the papier-mâché technique? Yes, yes - this is the production of three-dimensional objects using paper and any paste. This is the simple technique we will use.

And one more important point. Have you figured out what to put inside the big egg? After all, children are always interested in the contents of the Kinder, aren’t they? And the size of our masterpiece may depend on the content. So think about this nuance before you start working.

What we need to prepare for the creative process:

One balloon
Paper material (a lot) - newspapers, plain A4 paper, tissue paper
PVA glue
Starch for making paste (if there is no glue)
Gouache
Brush
Container with water
Scissors
Thread or lace
Printouts with inscriptions.

About the inscriptions. Here you can copy and then print templates. They will make the product look like factory copies. But for greater effect, I suggest making the Kinder Surprise also personalized if you are creating it for one child. This means that you need to type the name into the computer. Then print, color and paste below the main inscriptions. Is it necessary to talk about children's emotions when receiving a huge gift with their name on it?

Now let's talk about the adhesive composition.

If we use glue, we will dilute it with a small amount of water.
If PVA is not at home, we will prepare a paste from starch. I used corn, but you can also use potato, of course. Take a tablespoon of starch and mix it with two equal tablespoons of water.

There should be no lumps, please keep this in mind. Then pour a glass of boiling water over the mixture and stir. Place on low heat and bring to a jelly consistency, remembering to stir. Then we will give it time to cool down.

Attention: you will need a lot of paste. So it’s better to prepare two or three servings at once. No one can tell you the exact quantity, since the size of the inflated balloon is different for everyone.

Step-by-step creation of a large kinder surprise from paper with your own hands

First, inflate the balloon to the desired size. When inflating, do not forget to give it an egg-shaped shape. We tie it with a thread or lace in such a way that we can untie it later.
Let's choose a convenient vessel to place the inflated balloon in. It will be more convenient to work this way. This could be a bowl, for example.
Then we will cut the papers. The smaller the better. This will avoid unsightly folds. So as not to be very tedious, let's focus on pieces with sides of 5 - 10 cm.
Now we will paste the first layer. Now we only need paper pieces and a container of water. But look, I only have printer paper. If you also have a newspaper one, then start with that. You will definitely finish it white so that newspaper letters and texts do not show through the paint.
We wet the pieces in water, and do it generously so that the paper gets well wet and sticks to the ball. Quickly cover the entire surface. If the first pieces begin to dry out, moisten them a little so that they do not lag behind. Yes, I completely forgot - glue the pieces overlapping, there should be no un-glued areas. You can also use smaller pieces for gaps.
Let the first layer dry a little, about 5 minutes, no more.
Then we coat the entire surface with paste or glue and begin gluing the paper. Don’t skimp on glue, this way the frame of the future kinder will be stronger.
Apply the third paper layer. Again, we don’t skimp on the paste.
We set the product aside overnight, or for 8 - 10 hours. The layers should dry thoroughly.
After the first 3 layers have dried, apply another 2–3 layers in a similar manner. But this is the next day, as you understand. In general, even three layers will be enough, but for greater strength, for example, I add more glue. The number of paper layers is also affected by the weight of the gifts with which we will fill the egg. So decide for yourself how many layers to glue. But the minimum is three.
Now our task is to remove the ball. To do this, untie the threads or lace and pull out the airy base. If it doesn’t come undone, we’ll pierce the ball with a needle, or simply cut off the tip.
Let's mask the hole that we have formed due to the presence of the ball. It just needs to be sealed.
An interesting moment has come - let's start coloring. But first, let’s draw waves at the bottom of the workpiece, just like in the real product.
Add a small amount of PVA glue to the gouache - and it won’t stick to the handles, and it won’t crack when it dries.
First, paint the bottom red, then the top white. Let's give the paint time to dry.
Now you can work with the inscriptions. As promised, I offer 2 options: color and black and white.
Choose which one is more convenient for you. Copy, print, paste. You can, of course, write it yourself, but it’s more difficult, in my opinion.
On the side opposite the inscriptions, we will cut out a door, with the help of which we will fill the hollow egg with gifts. The door can be glued or tied with satin ribbons. See for yourself what is more convenient for you.

A big do-it-yourself kinder surprise is ready! The child will be delighted. Don't forget to have a photo shoot in front of a gorgeous gift.

I do not recommend hanging drying. Damp paper may sag and unnecessary folds will appear.
It is better to dry it in a container with holes so that air flows cover the entire surface.

How to make a large chocolate egg at home

Friends, it’s time to improve your skills and move on to creating a more exquisite gift for your beloved child. Making a big chocolate egg at home! Edible, sweet, tasty. And if we want, we’ll fill it with surprises.

Believe it or not, a balloon will help us with this. The egg will turn out smooth and truly huge! I just warn you right away: you will have to cool the product in the refrigerator. So compare the desired size of the surprise with the capabilities of your refrigerator.

We prepare everything you need to prepare mega delicacies

Dark chocolate 10 – 16 bars
White chocolate 6 – 8 bars
One balloon
Confectionery syringe
Latex gloves
Deep plate.

Step by Step Actions

Wash the ball carefully and thoroughly inside and out.
Let's dry it with a hairdryer. The ball should be dry inside.
Melt dark chocolate in a water bath. We should get a homogeneous mass, without a single lump. It should cool down a little. Please keep in mind that we need it neither hot nor cold, but viscous. This is a very important nuance.
Then unscrew the tip of the pastry syringe and carefully put the ball on. Now we will pull out the piston and inflate the ball to the desired size. Let's twist it for a while so that it doesn't blow away.
Now let’s spin the ball, on the contrary, and fill it. A syringe and a spoon will help us with this.
When we have filled all the chocolate, tie the ball tightly. Let's start rotating it carefully. To ensure that the walls are completely painted with chocolate, you can lightly tap the walls of the ball with your hands. Make sure that there are no unpainted areas left.
Let's turn the product vertically. At the same time, the remaining sweet mass will flow down, and our kinder will become quite stable.
We send the workpiece to the refrigerator. Let's note the time. The egg should harden for about an hour and a half.
Our next task is to make a second layer of white chocolate inside the egg. When the cooling time of our semi-finished product is up, we will prepare white chocolate - melt it in a water bath, just as we did with its black counterpart.
We put rubber gloves on our hands so that the sweet walls don’t melt at the touch of our hands. We take out the egg.
We put a deep plate on top, draw a line, and cut off the top.
We take it out as it hardens, fill it with gifts if desired.
Heat the blade of the knife, run along the edge of the egg, and apply the top. The temperature will melt the chocolate a little and the top will stick well.
Coat the seam with the remaining chocolate and remove the excess.

Well, is it impressive? Still would. How happy the children will be with such a surprise! To make it more similar to store-bought kinder, you can make a package.

You need to take foil. Cut out two oval figures of the appropriate size plus 10 cm at the edges. Then mark a wavy line on the bottom of each half and paint the bottom red. The top, as expected, is painted white.

Place an egg on the center of the unpainted side of one half. Cover with the other oval half and join the edges. All that remains is to glue the inscriptions, and you can distinguish our product from the branded one only by its size.

Such extraordinary surprises will remain in our and children’s memories for a long time. We are great with you. Let's meet more often on the pages of Altynai's blog, we won't do anything like that yet. Do you agree? So, see you again!

Nowadays, not every child can be surprised with an ordinary present. But by making a big Kinder Surprise with your own hands and giving it to a child, his happiness will know no bounds. Such a fake can be filled not only with goodies, but also with a toy that the baby dreams of.

You don’t have to order Kinder from any confectionery shops, especially since it won’t be a cheap pleasure. You can make such a miracle yourself, and the process is quite easy.

Making a Kinder Surprise out of paper is not difficult. The outer shell (shell) of Kinder is made using the papier-mâché technique. Consider a master class on Kinder Surprise made from papier-mâché. Almost everyone is familiar with this technique from their school days, but even if this is not the case, there is nothing complicated.

Equipment needed to make an egg:

The first step is to inflate the balloon. For convenient operation, it is recommended to place it in any container of suitable size. We cut the paper into small pieces.

Production of adhesive material. Mix 1 tbsp. a spoonful of starch with two spoons of water. Mix the ingredients until a homogeneous consistency is formed, pour 0.5 cups of hot water into the resulting mixture, put it on the stove and stir continuously until thickened. Then remove from heat, continuing to stir little by little, waiting for it to cool.

We take the previously prepared structure and begin work on creating the surface of the shell. Dip the prepared paper pieces in the adhesive material and evenly cover the entire ball (this action must be performed as quickly as possible). After gluing the entire ball, give it 5-10 minutes for the adhesive material to harden. Using the same algorithm, we create the second layer.

When creating the third layer, you need to generously coat the surface with glue and apply a paper layer (do not skimp on the glue, the paper should be well saturated). We leave the structure to dry overnight, in a warm and dry place.

After complete drying, you need to remove the inflatable ball from the resulting paper cocoon. To do this, you need to deflate it by untying the thread, or pierce it and remove it. The resulting hole must be sealed.

Next you need to paint the structure. You can use paint at your discretion. You can also color it to your liking, sticking to the original colors, or make adjustments at your discretion. If desired, we make the inscription ourselves using paints. Or we find a blank inscription on the Internet and print it out. If color printing is not possible, you can color it in black and white. The advantage is that the gift can be personalized by adding the name of the recipient in addition to the standard inscriptions.

The structure is ready, but you still need to place gifts in it. To do this, we cut a door from the back; the shape of the door is arbitrary, round, rectangular or curly, it all depends on your imagination. You can also carefully trim the top of the egg as an alternative to the door. We fill the form with gifts, and secure the resulting door with a ribbon for beauty. The papier-mâché kinder is ready.

Having created a paper egg using the above algorithm (before creating the door), we perform priming; this action will help strengthen the structure and get rid of unevenness. Apply plaster (putty) and let the egg dry. Then we cut out the door, the shape is arbitrary. We will consider the fastening not tape, but magnetic. We attach magnets to the door, applying several layers of paper on top.

It is also necessary to attach magnets to the base of the shell, parallel to those installed on the door. Having completed the door and making sure that it holds securely, we process the egg with fine sandpaper, getting rid of unevenness and roughness. Having examined the egg for the presence of recesses and depressions, it is necessary, if any, to re-treat the problem areas with plaster and re-treat them with sandpaper. You can paint a large inscription “Kinder Surprise”, similar to the brand name.

A chocolate egg is remarkable because it contains not only a pleasant filling, but also the structure of the egg shell itself is edible and tasty. It can be made both small and huge.

List of components:

milk chocolate (approximately 12-15 pieces);
white chocolate (7-10 bars);
ball;
cream injector;
foil.

First you need to wash the inside of the ball clean, then dry it.

Grind the chocolate, put it in a metal bowl, and put it on the fire. In this process, it is recommended to melt the chocolate consistency by steaming, stirring, until a homogeneous mass is formed. Next, you need to let the chocolate cool a little, but not much, you need a viscous consistency. We take the syringe, remove the cap and carefully put on the inflatable balloon. We take out the piston and inflate it to the required size.

Using a spoon, pour chocolate into the vessel through the syringe flask, pouring out the chocolate completely, the structure must be tied. By gradually rotating the structure, we spread the chocolate to all the walls. At the end of the procedure, the egg must be placed vertically, so that excess chocolate will flow down and make the structure stable.

Now that the main stage has been completed, put the chocolate sphere in the refrigerator for two hours so that the chocolate hardens. To prevent the chocolate from melting, you can wear rubber gloves.

Create a layer of white chocolate. To do this, put a deep bowl on top of the chocolate sphere, draw a cutting line, carefully cut off the top, and remove the ball. Spread the inside of the shell with white chocolate and put it back in the refrigerator until it hardens completely.

The egg structure is completely ready. We fill it at will with sweets, toys, and other fillings at our own discretion. Using a heated knife, running it along the cut contours of the structure, attach the top.

To give the egg true originality, it is necessary to make a foil package. We cut out two ellipses, the resulting blanks must be painted white and red, as on the original packaging. Wrap the chocolate egg in the blanks and seal. The inscription can be drawn using paints or you can use a printout of the finished inscription. The chocolate egg is ready.

A unique and interesting product. Almost everyone likes it, especially children.

List of components:

food gelatin;
Coca Cola;
syringe;
stationery clips, paper clips (5-7 pieces);
container for a gift (a box from the original kinder);
egg mold (packaging from “Kinder JOY”);
scissors;
dishes (deep bowl, glass).

Having collected all the necessary components, we begin to create the structure.

The first step is to create the material to form the Kinder shell. Mix half a glass of Cola with a tablespoon of gelatin and leave for 15-20 minutes. After allowing the solution to swell, place it in the microwave for 1-2 minutes. Now the consistency for the shell is ready.

Next, we begin to form the egg shell. Take one of the halves of the Kinder JOY package, pour 1 tablespoon of Cola solution, leave it in the refrigerator for 10-15 minutes to harden. At this time, we prepare a container for the gift, take a jar from the original Kinder and place the desired surprise in it. Take half the package with the frozen Cola solution, add another 1-1.5 tablespoons of the solution and place the container with the gift in it. Place in the refrigerator for 10-15 minutes.

Let's start forming a whole egg. First you need the second half of the package "Kinder Joy" make a small hole with scissors. Using paper clips, we connect both parts of the “Kinder JOY”. Through the hole made in one of the parts, using a syringe, we completely fill the package with cola solution. Place in the refrigerator for 15 minutes. After complete hardening, remove the plastic packaging. Carefully pack the resulting gelatin egg in foil and attach a label. Kinder from Coca-Cola is ready.

Such a hand-made gift will be very original and unusual; it can be given for any occasion, because it is possible to place absolutely any surprise in it - not only for children, but also for adults.

It’s not difficult to understand how to make a big kinder surprise with your own hands. It is enough to carefully study the instructions and work slowly. The simplest option is an egg made using the papier-mâché technique, filled with a variety of sweets and toys.

Tools and materials

An egg using the papier-mâché technique is durable. It can be used as reusable packaging for any gifts: candies, other sweets, toys. An original solution is to fill a homemade egg with real Kinder surprises.

To work you will need:

scissors;
balloon;
thin paper (writing, cigarette, newspaper);
PVA glue;
gouache;
printed inscriptions for registration;
threads;
brush;
water container.

The inscriptions that will be used to decorate the finished eggs are printed on a printer using ready-made templates from the Internet. You can complicate the task by making the surprise personalized.

Master class for beginners

Inflate the balloon; it should take the shape of an egg. Tie the neck tightly with a thick thread to prevent air from escaping. Place the ball in a suitable sized bowl for greater stability.
Cut the paper into small pieces of arbitrary shape. The main thickness of the product can be created using newspapers, but the top paper layer should be white.
Wet the pieces one by one in water and apply them to the surface of the inflated ball. This must be done quickly, otherwise the paper will not stick together.
After applying the first layer, let it dry for a few minutes. Coat the surface of the egg with glue. The thicker the coating, the stronger the finished egg will be.
Glue the second layer of paper, trying to distribute the paper pieces evenly. Cover them with glue and leave to dry for several hours.
When the egg is dry, glue on 1 or 2 more layers of paper. The thickness of the egg depends on the gifts inside. The heavier the filling, the more durable the packaging should be.
Cut off the bottom part of the ball with thread, seal the resulting hole with paper.
Paint the egg with gouache mixed with a small amount of PVA glue. Take a real Kinder Surprise as an example. Glue the printed inscriptions.
Cut a rectangular window in the back and fill the egg with gifts. Glue the resulting door or tie it with tape.

The finished egg can be packaged in transparent cellophane: the gift will look even more festive. All that remains is to present a surprise to the child and enjoy his delight.

If you want to give your child an original and amazing sweet gift, you need to learn how to make a big kinder surprise with your own hands.

All children love sweets and surprises, and a huge chocolate egg with gifts inside is sure to cause delight and a whole storm of emotions. This craft is quite easy to make yourself, and it will make a wonderful gift wrapping. Inside the huge egg you can put chocolates, sweets, toys and various pleasant surprises.

Papier-mâché technique

To create a package in the shape of a large egg, you will need to make papier-mâché. This technique involves gluing paper onto a template - an object whose shape needs to be repeated. In this case, you will need the shape of a huge egg, which can be achieved using a balloon.

The papier-mâché technique was invented in China, from where it spread to France and became famous throughout the world. Initially, it became popular in France thanks to decorative items from China and Japan, which quickly attracted attention and became popular in Europe.

What items were created

This simple and accessible technique made it possible to create various three-dimensional objects that were decorated with painting, embossing and varnishing.

Thanks to this technique, the following items were made:

Currently, this technique is often used in theater and cinema. Dummies of various objects are made that look almost no different from the real thing, as well as parts of stage costumes. This technique is also used for the production of factory products, for example, some types of lamps.

Ways to use technology

There are several methods that are used to create various products:

To make papier-mâché Kinder Surprise, the method of gluing paper pieces onto a ball is suitable.

Master class paper eggs

The master class will tell you how to make a huge kinder surprise from papier-mâché. It should be noted that working on papier-mâché will take several days, since the layers of glued paper will need to be dried well, otherwise the craft will be deformed. So, how to make a kinder surprise out of paper?

To make it you will need the following materials::

It is worth noting that it is better not to use newspapers to make papier-mâché. Soaked paint will appear on the top layer of the product. And this can greatly ruin the work. It's better to use regular printer paper or paper towels.

Progress:

The next step is to seal the hole. To do this, you need to cut out several white strips from paper, which should be glued crosswise. After the strips have dried, paper squares are glued on to form the top of the egg.

After drying, you should start decorating the craft. To do this, you need to bring the resulting craft as close in appearance as possible to the original..

Now you need to make a hole in the blank through which you can put gifts and sweets inside. To do this, you need to cut a hole on the opposite side of the craft, where there is no inscription, that will open like a door. To ensure that the lid opens and closes well, you can attach ribbons. Or you can simply seal the lid with tape to prevent the sweets from spilling out.

Large chocolate egg

Another great option involves creating an egg out of chocolate. It takes a lot of patience and effort to prepare such a delicious masterpiece, but the result is worth it.

To create a huge chocolate egg you will need:

Stages of work:

Now you need to create the packaging. To do this, wrap the egg in foil and paint it white and red, like a real kinder surprise. To complete, you need to find the inscription for printing “Kinder surprise”, print it and stick it with tape. The gift is ready. You can pack it in transparent cellophane and tie it with a bow.

Sweets are always a welcome gift for kids. A huge egg with sweets and toys will be the most wonderful and amazing gift for a child on any occasion. A surprise of this size will definitely please its owner and will be remembered for a long time.

Attention, TODAY only!