How to remove fat from a mink coat. How to clean a mink coat. How to clean a mink coat after winter with alcohol and champagne vodka

Is the dream of many women. When it appears in a fashionista’s wardrobe, each of them tries to wear the expensive item as carefully as possible. But, unfortunately, spots appear on delicate fur much faster than we would like. And then you have to think about how to clean a mink coat.

What you need for cleaning

It is worth remembering that there are different stains. Naturally, complex stains must be removed by professionals. Fresh stains can be removed at home. Depending on the color of the fur, the mink is cleaned using the following ingredients:

• talc;
• mild shampoo;
• alcohol and sawdust;
• hydrogen peroxide.

Such non-aggressive substances will help remove stains and will not damage the product. They just need to be used correctly. Each product has its own technology, which must be strictly adhered to.

1. Talc. It is better to use it to clean light fur. It is unacceptable for fur coats to be cleaned with flour or starch (some try to use them instead of talcum powder). To clean the product, you need to sprinkle the contaminated area of ​​dry fur with talcum powder and distribute it over the entire area. Then you need to shake the product, shaking off excess talc.
2. Shampoo. Since mink wool is similar in structure to hair, it can be simply washed. For this purpose, use mild shampoos (preferably with conditioner). After carefully washing the contaminated area, rinse it with running water and dry it with a warm hairdryer. Then hang the fur coat to dry in a dry and warm place. When cleaning this way, you need to allow several days to dry.
3. Sawdust. On an industrial scale, fur is cleaned with sawdust before use. They can also be used at home to thoroughly clean minks. To do this, buy the finest sawdust at the pet store. Pour a spoonful of wood shavings into a glass of alcohol. After 10 minutes, place the swollen sawdust on top of the fur. They will absorb all the dust and dirt collected on it. After half an hour, clean the product with a stiff brush.
4. Hydrogen peroxide. This method is used in case of yellowing of the fur. Mink turns yellow evenly over time and under the influence of temperature changes. To remove yellowness, mix hydrogen peroxide with water in a 1:1 ratio. Pour the solution into a spray bottle and spray the fur coat, after hanging it on hangers. After this, dry the product and comb it with a fine comb.

After “home cleaning”, you can walk around in a woman’s fur coat for several more years. If you notice any dirt appearing, take it to the dry cleaner to have the product cleaned by professionals. To preserve the results obtained during the off-season, store your fur coat in a light-colored case. Try not to wear it when it's snowing or raining outside.

Take it to your wall:

A simple option is to go to a dry cleaner. However, there are several negative aspects to this method. Firstly, the work of professionals usually hits the wallet, and secondly, there is a chance, albeit small, that the fur coat can be ruined. These two points lead to people looking for ways to independently give their items an original attractive appearance. There are several ways to clean a mink coat at home; we will try to shed light on the most popular and effective ways to deal with dirt and dust on this product.

A mink coat is one of those things that serve its owner for many years. If you organize proper care, you can forget about buying outerwear for the winter for a long time; a mink coat will reliably protect you from the cold for several years.

A mink fur coat can be used for up to 12 years, but beaver and otter fur can keep you warm for 20 years. The fact that the fur coat has worn out can be judged by several points. Wear is indicated by dirt adhering to the fibers, dullness and wrinkled fur, the appearance of plaque and dustiness, and lack of fluffiness of the pile.

Watch the video on how to determine whether your fur coat needs cleaning, as well as some useful tips from experts:

By the way, if you have already begun to put your mink product in order, then you need to remember about your man’s sheepskin coat. And we will tell you our useful tips on our own.

What not to do with a mink coat

• There are manipulations that cannot be performed with a mink fur coat. You can't do something like this:
  • subject to local washing;
  • wash it in the usual way;
  • Use detergents not intended for processing fur.
• You should not listen to advice that fur should be dried over an open fire, heater or radiator. Weather conditions are unpredictable, so it is quite difficult to protect yourself from wet snow or rain. You can dry a mink coat after a weather surprise by placing it in a well-ventilated room, but drafts should not be allowed in this room.
• No matter how obvious it may sound, you must definitely remember that ironing mink coats is strictly contraindicated. It is difficult to imagine a sane person who would decide to introduce his furry beauty to an iron, but such individuals do exist.

Dry cleaning specialists say that sometimes clients bring fur coats that look as if they have been under pressure. At the same time, the owners of fur products are confident that they did everything absolutely correctly. There is only one conclusion from this - a hot iron and a mink coat are not compatible. The fur coat will acquire an attractive, unwrinkled appearance over time.

At the first stage, you will need to wash your fur coat; in this case, accuracy is important, combined with a strong impact. Now you need to arm yourself with a brush lightly dipped in gasoline and start cleaning the fur.

To avoid yellowing, light mink fur must be treated with a special solution consisting of water and hydrogen peroxide. To prepare this product, you will need to dilute a tablespoon of peroxide in a liter of water. If the fur already has yellow stains, then the treatment must be done with a more saturated solution. This solution will relieve you of the problem of removing yellowness from white mink at home and giving it its original appearance.

When cleaning with this product, special care must be taken. Under no circumstances should peroxide get on the base, otherwise damage may occur.

Mink fur often wrinkles when worn; to correct this problem, you need to go over the problem area with a wet, soft sponge. The fur fibers should remain moist. After this, you need to gently comb the fur, moving along the growth of the villi. To dry the fur coat, hang it on a hanger and leave it that way. After complete drying, the fur coat must be thoroughly beaten.

The next method of cleaning mink fur at home involves using a warm soapy solution. Its preparation consists of mixing hair shampoo with ordinary clean water. Instead of shampoo, you can use any other detergent that has a non-aggressive composition. To apply the resulting solution, you can use a soft sponge or arm yourself with a small piece of soft cloth.

You can apply the product to a mink coat in a rather cunning way. You will need an old comb and a piece of cotton wool. You need to soak cotton wool in the solution and then wrap it around the teeth of a comb. With this tool you need to carefully go over the entire fur coat. It is important that the cotton wool is well secured to the teeth and does not fall out during manipulation.

For the third method of cleaning a mink coat, you will need sawdust from hardwood trees. You can purchase such material at any pet supply store.

Purchased sawdust must be soaked in water, and then a little pure gasoline must be added to the solution. The fur product must be thoroughly straightened on a flat surface. Sawdust soaked in a gasoline solution is evenly distributed over the entire product. At the final stage, you need to thoroughly clean the mink fur using a brush.

You can clean a mink coat at home using potato starch. This ingredient fights dirt well and is absolutely safe for lint.

You need to proceed in the same way as in the case of sawdust. Straighten the fur product thoroughly and sprinkle it with starch. Then you need to thoroughly rub the powder with your hands and then shake it off your fur coat. If the starch has darkened, this may indicate that it is worth cleaning again.

You can make not only culinary masterpieces from semolina. It is also perfect for cleaning mink fur. Another advantage of this method is that semolina can be found in almost every kitchen.

To clean the fur of a mink coat, you will need to cook semolina; the recipe is simple. A glass of milk should be brought to a boil and a tablespoon of cereal should be poured into it. Next, spread the porridge in an even layer over the entire surface of the fur coat. The product should be left in this form for six hours. After this time, you need to arm yourself with a wide-toothed comb and thoroughly comb the fur fibers. Finally, it’s worth fluffing the fur coat.

The following recipe will help give a mink coat its original attractive appearance.

To make a “magic” remedy, you will need to mix alcohol, hot water and detergent. You will need one-fifth of a glass of water, a few drops of alcohol and literally a drop of detergent (absolutely any will do). All ingredients must be mixed thoroughly.

Before you begin a full cleaning, it is worth checking whether such a detergent is suitable for a particular product. For this purpose, it is worth applying a little of the resulting solution to the area most hidden from attention. Now we need to analyze whether any damage occurs when the fur is stretched. If no defects appear, then you can begin processing the entire product.

Gauze and cotton wool are best suited for the job. A small swab should be moistened in the cleaning solution and application should begin in the direction of the pile.

Preparing mink coats for storage for the summer

Video on how to clean a mink fur coat at home in order to prepare it for storage after the winter season and how to store a mink coat in the summer:

In custody

Using these recipes, you can return your favorite mink coat to its original beauty, shine and grace. However, it is important to strictly follow all instructions; excessive independence in this matter can be disastrous.

Cleaning a mink coat at a dry cleaner

Perhaps, at first glance, the contamination will seem very serious, and then it will be possible to question the quality of all the above methods. In this case, it is better not to take risks, but to entrust your precious fur coat to the hands of dry cleaning professionals. Of course, there is a possibility of running into incompetent employees who are negligent in their work. Such a bad experience can lead to damage to your favorite outerwear attribute. To exclude such a scenario, it is better to contact a dry cleaner with a good reputation and in this case you should not save. You may have to pay a little more, but the risk of ending up with a damaged product will be minimal.

Are you wondering how to clean a mink coat at home? Right now you will learn how to do it quickly, efficiently and, most importantly, without damaging the fur.

Is cleaning necessary?

First of all, you need to decide whether your fur coat needs cleaning. Of course, if you got it dirty in a vehicle or the fur got splashed from under the wheels of a car, the need to eliminate the dirt is obvious.

If you are thinking about cleaning your fur from accumulated dust and possible grease, we recommend that you use a regular hair dryer.

Direct the air stream at the fur coat at a distance of at least 40-50 centimeters. If the fur hairs fly away easily and freely and form a small open area in the center of the air flow, which disappears as soon as you remove the hairdryer, and the hairs fall back to their original place, then we can conclude: your product does not need cleaning.

In this case, it is better not to injure it and simply send it for storage.

If, under the air flow, the hairs remain motionless or become bunched up, your fur coat really needs proper cleaning.

Dry cleaning

First of all, it should be noted that there are two types of cleaning mink fur:

• dry;
• wet.

If you want to learn how to clean a mink coat at home, a video on dry cleaning will help you learn in detail the correct sequence of steps.

To remove dirt from a fur coat, all you need is a fur care brush with short metal bristles. First, the product must be thoroughly dried without the use of artificial heat sources.

It is enough to simply hang the fur coat on hangers of suitable size in a room at room temperature. When the stained area is dry, run the brush over it in the direction of hair growth several times, then shake the product.

The brush will remove dry dirt, and the cleaned fur will shine again.

Semolina

The method of cleaning mink products using semolina has proven itself to be excellent. It is suitable if the product has been worn for a long time and has generally lost its original appearance, become dusty and lost its shine.

This is especially noticeable on the sleeves, in the collar area and pockets. Lay the fur coat on a flat surface and sprinkle semolina on the stained areas.

Using light movements, simulating the process of hand washing, treat the necessary areas for 30-45 seconds.

Semolina will act as an excellent abrasive that will quickly remove dirt from fur. Finally, shake the product and go over it with a special brush, which we wrote about above.

Some people recommend using starch instead of semolina. If after the described manipulations the starch became darker, it means that the fur was really dirty and the cleaning procedure should be repeated once or several times until the starch remains snow-white.

Wet cleaning

Wet cleaning involves a more aggressive impact on the fur using a variety of liquid compositions.

One of the popular methods of cleaning mink fur is combing it with a brush dipped in gasoline. It should be noted that such manipulation is not recommended for very light fur, otherwise it will turn yellow.

You need to work the brush lightly, without pressing and without trying to completely wet the fur. It is very important to follow the necessary safety precautions, work in a room with open windows and away from the source of fire.

Peroxide

How to clean yellowness from a mink coat at home? There are several ways. The most effective are the use of hydrogen peroxide or vinegar.

Take a regular cotton pad and a bottle of 5% hydrogen peroxide. Using a disc soaked in the solution, work the fur in the direction of hair growth.

You will see traces of dirt on the disc, and also notice how the cleaned fur will again shine and become snow-white. At the same time, do not forget to change the cotton pads.

Vinegar

How to clean a mink coat at home with vinegar? Very simple. Prepare a vinegar solution (no more than 5%) and follow the instructions for cleaning with hydrogen peroxide.

The most important thing is not to overdo it and not to wet the base of the fur. Treat the product without applying pressure; after soaking the cotton pad in the solution, squeeze it out.

You can spray the starch solution onto the fur surface using a spray bottle and let it dry. After this, remove the coating with a special brush for caring for fur products.

Sooner or later, the owner of a fur product faces the question of cleaning it. If you don’t have the money to take your fur coat to the dry cleaner or you’re afraid that it will be ruined, then you can use simple methods that will help you get your favorite fur item in perfect order. How to clean a fur coat at home without being upset about the result?

How to clean a fur coat at home correctly?

Under no circumstances should fur be washed or wetted with water. It is recommended to dry your fur coat in a well-ventilated area, away from drafts and air heaters. Drying near heating appliances, with a hairdryer or over a fire can lead to negative consequences. It is strictly forbidden to iron a fur product; If you hang a fur coat on hangers, it will soon straighten itself.

You need to clean your fur coat in the following cases: if color uniformity is lost; there is dust contamination with plaque; there are particles of debris between the pile

Methods for cleaning fur coats at home

Before you start cleaning your fur coat, the product should be carefully knocked out to get rid of dust and possible particles of debris. Next you will need potato peelings. Rinse them thoroughly under running cool water, grind in a blender or pass through a meat grinder. Add a little ammonia and stir. Apply the resulting mixture to the fur and rub with a brush in the direction of hair growth. Then remove any remaining mixture and wipe the fur with a damp sponge. Hang the coat on hangers and leave to dry naturally at room temperature.

Moths and leather beetles love fur items that hang in the closet for a long time. You can save your fur coat from pests using a perforated cover in which to store the fur item. Place a bag of lavender nearby

How to clean a white (light) fur coat?

Light fur can be cleaned with a mixture of refined aviation gasoline and potato starch. The result should be a homogeneous paste without lumps. Dampen a sponge or brush in it and clean the fur, let the mixture dry completely. Then shake the product thoroughly and use a stiff brush in the direction of hair growth. There will be no trace of dirt left. It is advisable to carry out this cleaning procedure in a well-ventilated place (for example, on a balcony).

What's in the article:

A luxurious fur coat with fluffy natural fur is the dream of any woman. A mink coat is an indicator of a high prestigious social status, capable of instantly giving an image a special charm and emphasizing the femininity of its owner. Mink not only decorates its “mistress”, but is also able to warm and give comfort even on the most severely frosty days.

How to determine when a fur coat needs to be cleaned?

Like any item from a woman’s wardrobe, despite the most careful wear, a fur coat can become dirty and lose its appearance. Since a mink coat is quite expensive, it requires a more careful and scrupulous attitude. To prevent the mink from losing its appearance and qualities as a result of inept handling, you should figure out how to clean a mink coat at home correctly. First you need to determine whether your fur coat needs cleaning.

1. If, when directed at a fur item by a stream of warm air from a working hair dryer, the pile is soft, fluffs easily and “scatters” to the sides, then you can clean it later.
2. If there are traces of dust, dirt, plaque on a mink coat, yellowness has appeared, the white color of the coat has turned gray, the product has lost its shine, the fibers are crushed, stick together and are hard to the touch - you cannot do without cleaning.

To make a mink look luxurious, it is not necessary to clean it regularly; all treatments should be performed only as necessary and as required by the degree of contamination.

How not to clean fur coats at home

With certain knowledge and skill, cleaning a natural mink coat at home is not a complicated and fairly affordable procedure, eliminating the possibility of damaging expensive fur through improper actions.

The home method of cleansing provides the following prohibiting conditions:

• Wash it as usual (by hand, in the washing machine).
• Use detergents (powders, gels, sprays) not intended for processing fur.

• Subject light (white) fur to local cleaning.
• Carry out drying over an open fire, near heating radiators, or a heater.
• It is strictly forbidden to iron the product or treat it with hot steam.

If a mink coat gets wet due to rain or wet snow, then it must be dried at room temperature in a well-ventilated area without drafts. Over time, the mink will dry out on its own and acquire an attractive, original appearance. If this condition is not met, yellowness may appear on the light pile.

Cleaning your fur coat at home

Cleaning a mink coat at home is a serious risk for the product. Therefore, before carrying out it, it is better to consult with specialists (specialized workshops or the manufacturer). Each product requires its own approach in choosing methods and means of cleaning it.

There are 2 ways to clean a mink coat:

1. Dry
2. Wet

Dry cleaning fur

Dry cleaning is the most reliable, safe and suitable way to clean a mink coat at home.

To clean fur in this way, use dry home remedies such as potato (corn) starch, wheat flour, and talc. These products perfectly absorb dust and dirt particles, returning the product to its original appearance, color saturation and shine. This method is perfect for cleaning items with light as well as white fur.

Here's how you can clean your fur coats at home:

• the product is carefully straightened and laid out on a dry, flat surface,
• comb the pile with light, gentle movements using a soft brush with blunt teeth,
• sprinkle a cleansing agent (starch, flour, talc) over the surface of the fur, run your palm over the pile, gently rubbing the product into the fur,
• shake off the fur coat from the remnants of the cleaning product. If it turns gray, then repeat the procedure again.

The main disadvantage of this method is the inability to remove greasy stains, yellowness, and heavy dirt.

Wet cleaning of a fur coat

The wet method for cleaning a mink at home makes it possible to get rid of stubborn dirt, greasy stains, and traces of yellowness.

Basic rules for cleaning a mink coat using a wet method at home:

• the mink coat should be hung on a hanger, straightening out the hangers, sleeves and all irregularities,
• wipe the product with the product in the direction of pile growth (for long-haired products), against pile growth (for short-haired products),
• after the treatment, the fur is carefully combed with a special brush with sparse blunt teeth,
• dry in a well-ventilated area at room temperature.

A solution of 100 grams will help you clean your home and restore the shine to your mink coat. natural pork fat, 10 gr. baby soap, 10 drops of ammonia (ammonia solution) and 1 liter of hot water. Mix everything thoroughly and cool. Use a brush moistened with the solution to go over the pile of the fur coat, lightly rubbing it.

A homemade soap solution will help clean and get rid of tea, coffee, and juice stains. Dilute liquid soap in warm water, moisten a sponge in it and wipe the contaminated areas. Then the sponge is moistened in clean warm water and the remaining soap solution is washed off. Dry the fur coat well by hanging it on a hanger by its hangers.

Pure alcohol will help remove grease stains. You should wipe the area with the greasy stain soaked in alcohol with a cotton pad. Then wipe the area with a cotton pad soaked in clean water.

Grease stains can be easily cleaned by sprinkling them with coarse table salt and then shaking off the residue.

Light stains can be removed using an ammonia solution. To do this, add ammonia to the water in a ratio of 2:1. Wipe the contaminated area with this solution, then blot the cleaned area with a dry cloth. This method is suitable for light, white fur coats.

A solution of water and hydrogen peroxide diluted in a 1:1 ratio will help to refresh and restore the richness of white fur. The greater the yellowness, the more concentrated the composition should be. The resulting composition is poured into a spray bottle and sprayed onto the mink fur. Then dry thoroughly.

A mixture of equal parts gasoline and potato starch will help clean faux mink fur. The mixture is applied with a brush, allowed to dry, and then cleaned of any residue.

Important! Before starting such cleaning, you should check the effect of this composition on an inconspicuous area with fur, as it can change the color of the pile, as well as spoil the quality of the product. This homemade composition can be used only in extreme cases, when other methods have not given a high-quality result.

Treatment with a spray of sage and lavender decoction will help add freshness and a pleasant aroma to a mink coat. You can dilute a few drops of essential oil (bergamot, grapefruit, rosemary, tea tree, neroli) in warm water. Pour the resulting solution into a spray bottle and spray the pile from a distance of 30–40 cm.

Fur coats should be stored in a spacious closet away from foreign odors. To prevent the appearance of moths and mold, it is not recommended to put a polyethylene cover on a mink coat.

All of the above methods are suitable for both natural and artificial mink fur. To clean a white or light mink coat, you should choose methods that preserve the color and shine of the product and avoid yellowness and grayness. If the home method of cleaning a mink coat is carried out correctly, then the fur has a uniform shine, the pile is pleasant to the touch and has a pleasant, refreshing aroma.

A fur coat made from natural mink fur, if properly cleaned and cared for, can serve its owner for decades.