How to make a classic paper airplane. How to make a paper airplane. How to make a military plane out of paper

Making a paper airplane that will fly is very simple. It is important to follow the instructions provided on how to make the plane and make the bends carefully.

Any person in childhood loved making such paper airplanes and then launching them, and the higher the point from which the plane was launched, the more interesting the activity was.

Assembling an airplane is not only a fascinating process, but also develops a child’s fingers.

Instructions for creating an airplane

It’s worth starting with the fact that the product can be made from almost any paper.

Start with simple designs and then gradually move on to more complex ones:

Position the paper so that the short part is facing you.
Mark exactly the middle on this side.
Fold the paper so that the top corners are aligned with the center.
Fold the top part exactly in the middle.
Bend back the small part of the triangle so that you can later fold the corner of the airplane back to the middle, and secure the resulting structure with a small triangle.
At the end of all stages, it is necessary to bend the resulting material in half and bend the wings back.
The plane is ready.

To better understand how to make such an origami product, check out the step-by-step photo of a homemade airplane.

Making a modern airplane model

When you can easily make simple airplanes, you can move on to more complex models.

One of these is the “Glider”, which flies very high and far, while it can maneuver well in the air:

Fold the sheet in half.
As in the first option, you need to fold the corners of the plane towards the middle.
Visualize a line in the middle of the product, then make a bend in this place. You will get a very sharp nose of the plane.
The wings of the spout must be folded so that they look back a few millimeters.
Fold the product in the center so that the reverse side becomes the inside.

The last step is to bend the wings, which can be made narrow, or vice versa – wide. Through experimentation you will learn how to make an airplane more maneuverable with your own hands.

Military airplane

The following type of aircraft model is more complex than the first two, but you should not have any problems building it:

The first point is repeated from the first model.
Fold in the middle. Fold the corner that is at the top. Repeat on the other side.
As a result, you should see a detail that resembles a cross. Fold the side pieces together towards the center piece on both sides.
You should see the horns, fold them in half, and wrap the remaining paper inside.
The bottom corners should be bent in the opposite direction from you.
Fold the product in half and the plane is ready for battle.

How to make a flying airplane out of paper?

When you get tired of making airplanes, and this will happen quite soon, but your child will not leave you asking to make him a new airplane, then show him a couple of lessons on creating a simple model on his own.

It will also be possible to add a separate propeller to such an airplane, which will give some realism to your product:

Fold a piece of paper diagonally twice
Fold the resulting sheet along visual lines, which is divided by diagonals into two even parts
Both corners must be folded in opposite directions
On both sides, fold the edges one more time so that the new part is lightly flush with the previous one.
The edges should be folded over the received parts
Fold one more time toward the center, and then tuck the corners inward.
Both lower corners must be bent into the resulting holes.
For the propeller, you need to cut a square sheet of paper diagonally, leaving the whole core
Fold the propeller, all the time securing it with a thread and a needle
The last step is to secure the propeller to the tail of the plane.

How to make a model airplane that will fly quickly?

We bend the sheet in half and open it back. Now we bend the sheet across and fold the two edges to the bottom side, and then bend only half of what was bent before.

We unfold the sides that are on the sides and bend each part to the inside. We bend a small section of the wings and bend them away from the underside. In the middle, where the fold line is located, carefully compact it with your fingers or using a ruler.

We bend the resulting bends so that they are parallel to our wings and the plane is ready.

Based on the instructions given, try to create your own personal version of the original idea of airplanes and methods of making paper airplanes.

Any, even the most primitive folded paper airplane, will fly perfectly if everything is done correctly and the bends are carefully made.

If your child wants something new, you can always show him how to make a plane with a folded tail and flaps. Airplanes gifted with such parts fly high and very far.

These examples of creating airplanes are far from the only ones; on the Internet you can find a fairly large number of diagrams and descriptions, as well as tips that will help you make a new type of airplane every time and make your child happy.

What you can make an airplane from at home is up to you to decide. Try experimenting with different materials that lend themselves to these bends and you will notice that each plane made from a different material will have a completely different flying ability.

Maintain symmetry, as an error of just a couple of centimeters can tilt your plane to the side, so that it will not fly or will fly, but only downward in a spiral.

The presented master class on making airplanes will help you and your child get a lot of pleasant memories and emotions. Create a whole squadron and go outside - let them all into the sky.

DIY airplane photos

Every child has tried at least once to build a passenger plane out of paper. The guys tried to make the design so that it would fly further and more smoothly, but more often than not, that’s where the whole hobby ended. However, having matured, some begin to ask the question: “How to make an interesting three-dimensional model of an airplane with your own hands?” If you are one of them, then you will find answers to all your questions in this article.

Materials

To make a volumetric passenger plane from paper, you need to be very careful about the choice of material, as it will have a direct impact on the quality of the finished product. You will need:

Paper;
Glue;
Scissors;
Ruler;
Tweezers;
Dye;

Paper

How high-quality the aircraft model will be will directly depend on the paper chosen. It would be logical to choose the densest one, but the harder the material, the harder it bends. Therefore, if you have to make a layout with many small details, then it is better to give preference to thinner paper, but not less than 160 g/sq.m. You can, of course, do the work from cardboard, but you won’t be able to print the details on it.

Glue

How to make a durable airplane that won’t fall apart at the first whiff of wind? Right! Using high quality glue. It should not soften the paper or leave unpleasant yellow marks. It is better to choose a universal or specialized glue for modeling. This will last a long time and will help maintain the original appearance of the paper airplane for a long time.

Scissors

Well-chosen scissors will add neatness and elegance to a paper airplane model. Firstly, they must be sharp and not damage the paper. Secondly, modeling is a rather long and labor-intensive process, so it is better to give preference to convenient models. And, thirdly, for parts of different sizes you will need different scissors, so it would be nice to have at least 3 types in your arsenal.

Ruler

Almost any ruler is suitable for building an aircraft model. The main thing is that it is rigid, because the fold lines may turn out crooked, and then it will simply not be possible to create a beautiful paper model of the aircraft.

Tweezers

This tool will be needed for gluing small parts. You can use ordinary cosmetic tweezers, but it is worth noting: the longer and sharper it is, the easier it will be to work.

Dye

Some parts have to be printed, while others, on the contrary, require working with paint. Before painting, paper requires mandatory treatment in the form of varnish, primer, putty and sanding, after which you can use anything to add color. However, if your budget allows, it is better to stick to professional modeling paints, such as Tamiya or Humbrol.

Knife

Sometimes the design contains such small details that even the smallest scissors will not work for cutting. This is where a paper knife comes to the rescue. The main thing is to choose a model with a thin, sharp blade.

Airplane assembly

Having correctly selected all the necessary tools, you can begin to make a passenger plane out of paper. If you already have extensive modeling experience, you can make the drawings yourself. For those who are gluing airplanes for the first time, it is better to go to the website https://izobretaika.in.ua, where a wide variety of schemes and templates of interesting models are offered. So, how to make a beautiful and voluminous model?

We print the stencil on a prepared sheet of thick paper;
Carefully cut out each piece with scissors (for smaller ones, use a knife);
After all the parts are cut out, use a ruler to mark the fold lines;
Next, glue all the parts together. You need to start with the main body of the aircraft;
Attach the tail and wings to the “body” of the structure;
Add smaller details such as the landing gear, windows and doors;
The paper passenger plane is ready.

Airplane painting

If you decide to resort to simple schemes and paint the plane yourself, so that the color goes on evenly and lasts a long time, It is very important to follow these steps:

The paper must be impregnated with solvent-based varnish;
Next, primer is applied (for convenience, you can use a spray);
The resulting layer of soil needs to be sanded (sandpaper is perfect);
After this, the structure is puttied, thereby removing unevenness and smoothing the surface;
Pay attention to small parts; it is better to additionally treat them with super glue for additional strength;
Apply paint to the evenly puttied model;
Let the plane dry. And everything is ready!

The work area should be well lit so that you can see every detail clearly. Scissors or a knife must be selected in accordance with the size of the elements: for large ones, large ones with straight blades are suitable, and for small ones, manicure scissors or a knife. It is recommended to cut out each spare part as needed in order to avoid confusion and not lose anything. To keep the details neat, twist the sheet of paper, but never bend your arms.

Folds

Leaning the ruler against the fold, run something blunt along it. This way you guarantee yourself neat lines while assembling the model. If you need to highlight sharp edges, it is recommended to use a knife, but only apply light pressure. This way the corners will come out clear and even.

Decide which fold you need: external or internal. To perform the first, you need to achieve a certain convexity of the part by bending it so that one of the sides is higher than the other. And in order to get the second one, then, accordingly, on the contrary, you need to make sure that you get something like a hole.

Gluing parts

This stage should be given special attention, since the appearance, quality and durability of the model will directly depend on it. Many models have tabs designed for gluing, so you need to apply glue to them and press them together. It is very important not to overdo it; if you pour too much of the substance, it can damage the structure of the aircraft, thereby making it less presentable. Squeeze out a small drop and spread it over the rest of the surface. If you need to place one spare part into another, apply glue to the sides.

Bending round parts

Sometimes a passenger airplane made of paper may have a rounded “body”. To make it look natural, it is very important to round the details correctly. To do this, place the element in your palm and run something like a pencil or pen along the inside; for smaller details, you can safely use toothpicks. This way you will achieve the desired shape and easily glue the spare part in the form you need.

Joining parts

The edges of some cylindrical elements, such as an airplane frame, can sometimes be difficult to glue together. To do this, it is recommended to leave additional space on one side without a pattern, which will “hide” under the other. This way the surface will have a perfectly smooth appearance. Glue can be applied to one edge or to both, the main thing is in moderation.

Since making a passenger plane with your own hands is far from easy, those who managed to build it can certainly be proud of themselves. Aviation is a rather complex section of modeling, since products require special attention, time, concentration and painstaking work. By following simple recommendations and approaching the matter wisely, anyone can get a beautiful, neat layout.

Peculiarities: a model capable of covering a decent distance at good speed. It only takes five steps to fold the plane.

Difficulty level: short.

2. Flying Hunter

Peculiarities: the plane has a weighted nose, due to which the flight range will increase. To set a record, you need to launch the “hunter” with maximum force.

Difficulty level: average.

3. Sprinter

Peculiarities: This plane can be called a “jet”; it flies very fast. There is room for experimentation: try folding the wings at different angles.

Difficulty level: average.

4. Spear

Peculiarities: a model designed for long-distance flights, like a spear. Requires precision when folding.

Difficulty level: average.

5. Phoenix

Peculiarities: An excellent plane that can be launched with any force. If you follow the instructions exactly, the flight will always be easy.

Difficulty level: average.

6. Dart

Peculiarities: a model of complex design, similar to a dart. The additional bend in the nose gives it more weight and increases its flight range.

Difficulty level: high.

7. Bird

Peculiarities: an original model resembling a swift or swallow. It flies very fast.

Difficulty level: high.

8. Fighter

Peculiarities: a model that replicates the appearance of a Navy fighter. It's difficult to fold, but it's worth it.

Difficulty level: high.

9. Starship

Peculiarities: This space-looking airplane is suitable for performing acrobatic performances in the air. If you throw it straight, it will flip over.

Difficulty level: expert.

10. Sea wind

Peculiarities: this plane will glide through the air due to its raised wing. You can start the model even with little effort.

Difficulty level: expert.

For more instructions on making original paper airplanes, see.

Reading time: 9 minutes

As a child, everyone was fond of throwing paper airplanes to each other. Many adults remember this type of entertainment only when children appear, when the basic skills for assembling complex origami crafts are already lost. To please and temporarily occupy your child, learn how to make a paper airplane using a simple pattern, teach the craft to fly, and what is needed to fold the model.

How to make paper airplanes

The art of aerogami has been around for over 50 years. During this time, folk craftsmen were able to come up with and skillfully implement hundreds of different models of paper airplanes. Some of them fly for a short time and only along one trajectory, but there are also those that are capable of covering long distances. Modern designs of a boomerang or an unusual glider have appeared.

How to glue a paper airplane

A thick sheet of A4 paper, a ruler, glue, scissors and perhaps felt-tip pens is all you need to glue a paper airplane together with your own hands. It will be good if you find a ready-made drawing on the Internet in advance and simply print the drawing. If there is a dotted line in the photo, this is the fold location. The arrows in the sketch indicate the rotation of the paper in a certain direction, and the straight lines indicate the location of the cut.

Origami airplanes

It will be easier for beginners to assemble a glider model from ordinary materials: A4 sheets, thin paper, notebook sheets or newspaper clippings. The main requirement for the material is that it is shaped like a square or rectangle. To make an origami airplane, you just need to follow clear instructions. There is one more little trick: to make the parts hold their shape better, aerogami professionals recommend running a ruler along the fold.

How to make a paper airplane - step-by-step instructions

To ensure that the assembled model holds its shape well and does not fall apart when touched, you need to adopt a few tips:

It is optimal to use small sheets with a density of 100 g/m².
During work, you must strictly follow the instructions, iron the bends well and fold the material according to the pattern.
To launch a paper airplane, it is important that all parts are symmetrical. Especially for balance, you need to pay attention to the nose and tail.

Simple airplane

When teaching aerogamy to children, it is better to start with mastering simple models. The method for making a classic layout is as follows:

Prepare a landscape sheet. Turn it towards you with the short side.
Fold the sheet in half and mark the middle of the sheet. There is no need to smooth out the fold.
Unfold the paper and fold the edges so that the corners touch the marked center line.
Grab the top of the sheet so that the fold is where the two folded corners meet.
Fold the top left corner in the same way. Repeat the same action with the upper right corner.
A triangle should have formed, bend it upward.
Fold the model in half. Form the wings.

Airplane

This model is almost no different in assembly method from the previous version, the only difference being the blunt nose. To assemble the airplane, follow these instructions:

With a piece of construction paper, do the first 4 steps from the instructions above.
Bend the upper left and right corners so that a straight line 0.8-1.5 cm long remains in the center.
Secure the part using the lower triangle.
Turn the model out along the center fold.
Straighten all the parts, set the desired wing angle.

Paraglider

Thanks to its wide wings, this model can soar beautifully in the air. To make an airplane from a sheet of paper, you need to follow the tips:

Bend and unfold the rectangular sheet lengthwise as always.
Measure about ¼ of the way from the top and fold toward the center.
Bend both corners inward so that their noses do not extend beyond the intended line.
Turn the model over and fold the folded half over itself.
Fold and fold the small corners in the center.
Fold the model along the central fold, unfold the nose and form the wings.

small plane

The dimensions of this model are small, so be prepared to do some painstaking work. How to make a paper airplane:

Take any sheet of paper measuring 20*20 cm.
Fold in half, press the fold.
Fold in half again to form a square. Mark the center.
Fold one half of the piece of paper onto ¼ of the sheet and make a mark.
Bend the sheet inward from the ¼ mark to the top edge to form a triangle. Press down the edge.
Turn the edge out so that a small triangle forms on top.
Turn the sheet over and bend the other side of the triangle inward.
Bend the wide end towards the pocket, not reaching the edge a few millimeters.
Do the same with the other side.
Place the fingers of one hand under the fuselage and hold the nose of the plane with the other. Lift the paper slightly with your hands.
Fold the corner into the pocket. Repeat the previous two steps on the other side of the sheet.
Fold the side of the large pocket up. Do the same on the other side.
Open the model, bend its front edge inward.
Turn the workpiece over and press the front part, using the corners as a guide.
Fold the plane in half, go along the folds.
Fold one side down along a line that is parallel to the center fold.
Do the same on the other side.
Fold the edge of the wing up for better aerodynamics. Straighten the model with your hands.

Big plane

This model can be used to decorate a child's room. To fold the liner, prepare cardboard, glue, scissors, a matchbox and follow the instructions:

Cut a long strip of cardboard, 2cm wide. Fold it in half.
Using glue, fix the edges in the center of the matchbox at the top and bottom.
Cut two strips of cardboard 4 cm wide. Round the edges.
Glue it to the matchbox on the sides.
Cut a thin strip of cardboard and fold it in half.
Fold the edges of the strip up, making a 1 cm indent from the edge.
Glue the blank to the tail.

Square plane

Many people are used to seeing flying machines with a pointed nose, but not all models can look like that. Try folding a paper airplane differently:

Turn the sheet of paper with the wide side facing you. Fold in half.
Turn the sheet over to the other side, with the narrow side facing you. Fold in half.
Unfold the sheet to the other side. Fold the edge toward the center of the fold.
Fold the corners on both sides.
Turn the sheet over so the folded side is facing you. Fold the edge up to the center.
Fold the plane along the center perpendicular line.
Fold the folded edge over. Open the pocket, holding the center with your fingers.
Unfold your pocket. Fold the wings to the triangle marked in the center.

Volumetric airplane

After you have mastered simple patterns, you need to learn to understand more complex patterns. Below are step-by-step instructions on how to assemble a three-dimensional flying plane:

Bend the sheet lengthwise and unfold it.
Fold the paper in half. From the center, fold the edges down, and then unfold half.
Unfold the sides, tuck each flap inward.
Bend some of the wings back.
Bend the wings from the bottom a short distance.
Press the fold lines with your fingers. Bend the resulting lines parallel to the folds of the wings.

Beautiful plane

You can decorate a child's room with paper crafts by collecting a whole collection of different models. To make flying machines pleasing to the eye, they can be made from colored paper or cardboard and decorated with appliques - numbers, inscriptions or stars. Three-dimensional models of passenger airliners look good on a shelf in a nursery. You will have to spend a little more time making them.

How to make a passenger plane out of paper

To create this model, you must download and print the Concorde airliner assembly diagram in advance. Then, to fold the passenger plane, follow the instructions:

Make folds in the center and top corners.
Fold the side parts towards the middle, then bend their edges back along the dotted line.
Fold the shape right side up along the center line.
Fold the corner along line 5, smooth it out, and then return the figure to its original position.
Repeat the same on the other side.
Tuck the edge inside the body along the dotted line, then pull its end back and bend it along line 6.
Bend both wings up and secure the tail with tape.

How to make a cool paper airplane

There are also models of devices that are capable of softly gliding for long periods of time or making long-distance flights. They are slightly different in design from their simple counterparts. If you want your airplane to fly further, choose a model that has narrow wings and a long tail. Balanced airplanes with a large wingspan are capable of long flights.

How to make a paper airplane that flies

If you are bored with learning the basics of aircraft construction, try making a cool model with good aerodynamics:

Draw a middle line and fold the corners along the edges.
Fold the product crosswise exactly in the center and turn it over.
Fold the corners at a slight angle, just short of the fold.
Fold the resulting corner, straighten the bent part on the other side of the plane.
Fold the model along the base, forming wings at equal distances.
Make small folds of the wings along the edges.

How to make a paper airplane that flies far

This design provides for the formation of additional wings in the nose of the device, which will ensure flight range. To make a paper airplane, follow the instructions:

Mark the center line, fold the edges to it at an angle of 90 degrees.
Turn the workpiece over and fold the corners toward the center again to form a sharp edge in the center.
Lift the triangle from the back and fold the resulting square in half.
Mark the fold with a pencil and tuck the rectangle into the middle of the pocket.
Bend the wings at a 90 degree angle.

How to make a military plane out of paper

Boys who are interested in war games, shooting games and armored vehicles will love the idea of creating a collection of military aircraft at home. There are a lot of models of such aircraft. You can fold a Fighter, Bomber, IL-2, Messerschmitt or other equipment. To make such toys look colorful and be as similar to the original as possible, it is recommended to make them from colored paper.

Fighter

Options for making such paper toys can be found on the Internet, or you can make a fighter out of paper according to this scheme:

Take a rectangular sheet. Fold in half along the wide part.
Bend two corners towards you.
Bend the corners diagonally again, starting the movement of the hand from the sharp nose.
Fold the product crosswise so that the sharp part is in the center of the opposite side.
Turn the paper over and fold the top edges down.
Turn the resulting corner towards yourself.
Bend the figure in half. Shape the wings and flaps of the airplane.

Bomb carrier

This beautiful model is a little more difficult to create, but the result is worth the time spent. To make everything work, follow these tips:

Fold the top of the sheet into a double triangle.
By analogy, bend the left corner, aligning the top of the sheet with the right side.
Make a fold of paper that will pass through the intersection point of all the resulting lines.
Fold the side triangles inward along it.
Mark a center line at the bottom of the paper.
Draw a line that is parallel to the base of the triangle.
Turn the paper over to the other side.
Fold the corner towards you.
Turn the layout over again and fold two corners up, first folding the top in half.
Turn the figure over and bend the corner.
Fold the right and left edge that is inside the layout.
Bend the corner away from you, fold the plane along the central fold.
Bring the edges inward, fold the shape in half, and then unfold it towards you.

Long-haul aircraft

This model can cover any distance. It has good aerodynamics, is well balanced and weighs little. A long-distance aircraft is made like this:

Make marks in the center of the sheet and bend the upper corners.
Fold the sheet in half, forming a roof with sharp corners.
The edges of the future wings are folded inward to sharpen the nose even more.
The layout is turned face down, then the back is folded vertically. without touching the bottom corners.
Bend the wing so that it covers the entire length of the workpiece.
Set the wings to the desired angle of inclination.

Video

The benefits of origami ( paper modeling) is unique in child development, despite its simplicity. Working with paper makes a person diligent, decisive, wise and balanced. Develops creative thought.

You can use origami for a long time take child at the dacha, captivate him with the process, and then together with him enjoy result.

Surprisingly, origami "addicts" not only children, but also their parents. Always Nice feel like a child and make some paper miracle with your own hands.

IN this article we will tell you how to make a paper airplane that flies for a long time, we will provide detailed instructions modeling of simple and complex models, we will provide photos and videos.

History of the paper airplane

Launch paper airplane is a favorite pastime of many: both children and adults. However, few people know that this activity appeared 85 years old back.

Jack Northrop, owner of a famous company Lockheed Corporation, tested real airplane models using origami crafts as experimental options.

Did you know that there is a competition called Red Bull Paper Wings, where competitors from all over the world compete to fly paper airplanes?

The author of such competitions is an Englishman Andy Chipling. He is the creator of the entire Paper Construction Aviation. He also wrote the rules according to which a paper airplane must be made in the format A4, and its assembly is carried out without tearing, cutting, or gluing the original material.

How to fold a paper airplane correctly

Even a three-year-old child can fold an origami paper airplane. However, for a paper figurine to have good aerodynamic properties (long flight) the following must be observed conditions:

Successfully executed planes fly far. The flight range will depend on the quality of the “assembly”. To the plane held on air long lasting time and traveled long distances, it must be long and narrow. It is better to place the center of gravity closer to the bow of the structure;
How lighter weight paper, those longer the plane will stay in flight. Give preference to medium weight paper (such as newspaper). An airplane made of thin paper will not be a durable craft;
Take your time when folding origami. Each fold must be smooth and symmetrical relative to the other. A hasty job will not show good result. Origami - hobby for diligent and attentive people;
Special When modeling an airplane, pay attention to it wings And tail. The wings must be the same. The time the aircraft floats in the air will depend on the correctly folded tail;
One of main The key to maintaining the flight duration of a paper airplane is its center of gravity. Make it heavier the front part of the model using additional paper bends;
Pay attention to the area where the future aircraft will be launched. In closed It is much easier to launch a plane indoors. Launching in an open area will depend on the wind, the strength of its gusts, and direction (you can find out the wind direction using).

Manufacturing methods

From choice The model of the future aircraft (classic aircraft, Fighter, Strela, etc.) will depend on the method and degree of complexity of its manufacture.

The simplest airplane models can be obtained after 4-5 consecutive actions. Manufacturing models of complex shapes, as a rule, multistage process.

Advice! If you have not encountered complex origami designs before, practice making simple models, and then move on to more complex ones.

How to make an airplane using origami technique

Let's consider the option of manufacturing the simplest classical model airplane

Sequencing:

Take a rectangular sheet of A4 paper (printer paper is suitable);
Fold the sheet in half lengthwise;
Fold the two upper corners towards the center so that they touch each other;
Fold the resulting triangle to the center of the sheet (towards the larger side);
We also fold the top corners towards the center. The bend lines at this stage should turn out slightly oblique;
We bend the tip of the triangle so that it covers all the curved edges;
Fold the craft in half;
We bend the tail of the model and give a more rigid shape to the wings by drawing lines at the corners;
The origami work is finished. You have in your hands a product ready for long-distance flights.

Visual The image of folding an airplane in the classical way is given by the following scheme:

Complex paper airplane model

Now let's consider more difficult aircraft assembly option than described above. If you work carefully and carefully, then in just a few actions (steps) you can make a beautiful plane, which, moreover, also flies well.

Advice! Make your first complex airplane model with your child. Prompt and guide your child’s actions. Thus, you train his memory and develop logic.

Sequencing:

Take a sheet of A4 paper. In our case, the paper is colored;
Fold a sheet of tissue paper in half lengthwise;
Fold the paper in half horizontally;
Fold the two sides so that the folded edges extend from the center to the bottom corners.
Bend it back again;
Fold the triangles on the sides in half, starting from the middle of the folds;
Now you should begin to unfold the folded paper;
Press all folded sides well, making sure all folds line up between the top triangles and the bottom diamonds;
The diamonds should be folded in half from the middle to the edge, with the pockets on the inside;
Then the upper part of the triangles is folded in half, from the beginning of the lower corners;
Next, the craft should be turned over and the sides bent in the same way;
Fold them by bending them into the central part of the craft;
The sides of the diamonds should be tucked under the craft. The result should be a triangle;
It should be folded in half vertically;
Next, you should tilt it to the left, skip about two cm from the seam and make a fold parallel to the line;
Next, the wing of the resulting aircraft should be bent down. The fold line should be straight;
Bend the other wing in a similar way, mirroring the first wing;
Draw on the wing parallel to the fold at a distance of 3 cm from it;
Bend the moving part of the wing along it;
This should be repeated on the opposite side;
The plane will fly better if the rear wings of the plane are bent by 3 mm at a right angle.

It is most convenient to create while sitting in a comfortable seat. You will learn about making a high chair (and more) from this article: