How to remove shellac at home instructions. Methods for removing shellac without special liquid. How does shellac remover work at home?

It is necessary to have knowledge of how to remove shellac at home if you plan to use the gel on your nails yourself. This coating is beneficial because it lasts a long time, but removing shellac is not easy. Gel polish is suitable for thin and brittle nails; it protects their surface, preventing the nail plate from peeling and breaking off. The varnish is convenient because it can last a month or longer.

Removing the varnish layer with home remedies

Shellac is made from biogel and requires a UV lamp to dry it. The layer lasts for at least 3 weeks, and in order to remove it earlier, you need to perform a salon procedure. Of course, it is possible at home. To correctly perform this action, you must stock up on the appropriate attributes and study material on how to remove shellac at home.

To remove the gel (in the absence of a special kit), you will need the following tools:

cotton pads or cotton wool;
aluminum foil;
acetone or liquid that removes regular varnish;
adhesive plaster (or tape);
sticks for pushing back cuticles.

Having prepared what you need, you can begin the procedure for removing varnish, which is similar to removing acrylic. Before removing shellac at home, you need to degrease your nails. To do this, just wash your hands thoroughly with soap and warm water.

To remove the varnish coating, you need to perform the following steps, following the sequence:

To save money, it is better to cut the disks in half, and cut the foil into ribbons of such length that they can be freely wrapped around the upper phalanx of the finger.
The cuticles and skin around the nails are lubricated with a rich cream, then cotton wool is moistened in acetone and applied to the nails.
The top of the cotton wool is wrapped in foil, which is secured with tape.
Then you need to wait 20 minutes, during which the shellac will soften and begin to peel off from the nails.
Then the foil and cotton wool are removed from the fingers one by one, and on the freed nail they begin to scrape off the varnish layer with a stick.
After all nails are cleaned, they can be polished with a soft file and covered with balm to restore the nail plate.

Return to contents

To be impeccable in everything is the desire of any modern woman. A well-executed manicure always emphasizes the status and success of its owner.

But caring about one’s appearance, unfortunately, is not the only thing for the fair sex. There is also cleaning, cooking, washing dishes, etc. An ordinary manicure cannot withstand such tests and quickly becomes unusable. All efforts to save it are doomed. The varnish coating cracks, peels off in pieces and looks ugly.

The latest developments in nail care are coming to the aid of women, aimed at maintaining a durable and easy-to-use manicure. Among them, as a beauty panacea, gel nail extensions, acrylic coatings and many others are offered.

Shellac is an example of such innovation. In a short time, it managed to gain great popularity due to its properties. This nail coating is a combination of polish and gel in “one bottle”. The manicure procedure is no longer associated with expensive nail extensions. It is significantly simplified and comes down to applying shellac (like regular varnish) to the prepared nail surfaces. A whole palette of fashionable colors is offered, and there are no barriers to creating a unique image.

Applying shellac is a salon procedure, because... requires manicure courses and some special equipment (ultraviolet lamp). However, if you have the opportunity to study the Shellac coating technique and acquire a lamp, then the application process itself will not be difficult at home.

What to do if you are tired of the same manicure color? How to remove shellac at home if you want to change everything when going to a party? After all, the durability of shellac coating is great and is calculated at least 3 weeks. The question arises whether it is possible to remove it and create a new one without visiting the salon. This will save a lot of time and money.

We offer several options for removing shellac at home.

Shellac is a polish that contains a gel, not just a gel. Therefore, there is no need to file your nails. This is beneficial for them (it eliminates mechanical damage), and simplifies the procedure for removing the nail covering.

What you need to remove Shellac yourself

You should first acquire all the necessary attributes for this action, preferably like in a salon.

Tools and means to remove shellac:

Disposable special wraps.
Nail polish solvent.
Special metal file.
Orange wood sticks (styli).

All of the items listed are included in the professional kit for removing this gel polish. However, not every woman has such a set.

How to remove shellac at home - the first method (when there is no special kit)

To remove shellac coating at home, you need the following items and tools.

Aluminum foil (some women use plain food grade polyethylene).
Cotton wool (preferably cotton pads for convenience).
Acetone (you can also use isopropyl alcohol or concentrated nail polish remover).
Orange sticks or any substitutes.

Technique for how to remove shellac yourself

It is necessary to wash your hands thoroughly with soap and warm water to remove fatty substances from them.
Many people advise separating cotton mugs into two parts in advance. Then they need to be cut in half with scissors so that several “crescents” are obtained. I don’t bother, and I use the entire cotton pad (I saturate only the part of the circle that I will apply to the nail). Sheets of foil or polyethylene also need to be cut into small pieces so that they can easily be wrapped around the nail phalanx of the finger.
Cotton pads are generously moistened with prepared nail polish remover. Next, they are tightly applied to the nail surface. It is important to ensure that the solvent does not come into contact with the skin around the nail or cuticle. Substances such as acetone or alcohol can cause irritation, allergic reactions and burns.
Then you need to wrap the nail phalanx (with cotton wool soaked in solvent) with a piece of cut foil or polyethylene and fix it. This action is carried out with each finger. The procedure time is about 10 – 15 minutes. During this time, you need to do several gentle, massage rubbing of the nails wrapped in foil. Just the main thing is not to overdo it, so as not to harm them.
The next step is to remove the foil and cotton wool from the fingers - each one in turn.
Having removed the wrapper from one finger, you should begin removing the softened shellac from the nail with a special spatula (or better yet, a wooden or plastic stick, since you are less likely to damage the nail). The same is done with all other nail phalanges.
If not all of the nail covering has been removed and areas that have not been peeled off remain, you need to treat them again with varnish solvent.
Then clean it completely with a stick.
At the end of the procedure, when the gel polish has been completely removed, the nail surfaces and cuticles should be treated with oil. To do this, rub it in with smooth, massage movements. This allows you to keep your nails in excellent condition (prevents them from drying out and becoming thinner).

The second way to remove shellac at home

To remove shellac yourself at home, you will need to purchase sponges (ready-to-use, disposable wrappers with adhesive clips), a special Product Remover from CND, sticks for removing the softened coating and oil for treating the nails and cuticles. All this can be purchased as a set.

Technique for removing varnish - gel

How to remove shellac - video

Removing shellac gel polish is not a complicated procedure. By following all these steps, you can easily remove and then just as easily apply a variety of shellac nail coatings. And this allows you to always have a manicure that matches the time, mood and situation.

Shellac or gel polish– one of the most popular long-term nail coatings, the application of which requires certain skills. If this procedure is most often performed in salons, then Removing such a product from the nail surface is quite possible at home.

Removing gel polish or shellac coating

Shellac base(Shellac from Creative Nail Design, made in the USA) – natural resin, thanks to which it is quite durable. Shellac or gel polish can stay on nails for 2 weeks or more. You need to understand that shellac is just one of the brands of gel polish manufacturers. As Pampers is one of the manufacturers of disposable diapers.

To remove this coating from nails in a salon, a special product is used to soften it - Product Remover, or carefully sawing off the coating with a router.

The master saturates the sponges with the liquid and places them on the nail plates, after which he wraps the fingertips in foil to secure them.
After 10-15 minutes, remove the fingers one by one from the overlays and, using an orange stick, carefully pry off the coating - it easily comes off the nail surface. Otherwise the process is repeated. Irregularities in the nails are removed using a soft file or buff.

Methods for removing shellac or gel polish at home

In order to remove shellac from nails at home, you can use both professional liquid and other improvised means. This coating is usually removed using:

regular nail polish remover;
soaking nails in nail polish remover or isopropyl alcohol;
files or buff.

It’s much easier for those who have a special tool. But what if you don’t have it at hand at the right time, and for some reason going to the salon is impossible?

Method number 1: Regular nail polish remover

The special product can be replaced with concentrated liquid for removing regular nail polish. Just pay attention: such a product must contain acetone. Other means will not work - they will not be able to soften the shellac even minimally.

For the removal procedure you need:

Cotton pads or cotton wool.
Regular foil, adhesive tape, tape - these will be needed to secure the cotton pads. Some people use polyethylene for these purposes, but it is not very convenient.
Acetone nail polish remover, acetone or isopropyl alcohol.
Orange sticks.
File.

The foil is cut into 10 pieces of such a size that it can easily cover a finger. The cotton pad is cut in half, each half into 2 more parts. When using cotton wool, you should divide it into 10 optimal parts. Narrow tape or adhesive plaster is also cut into the same number of pieces.

Gel polish removal steps:

1. A piece of cotton pad is moistened in an acetone-containing liquid and carefully applied to the nail plate. It is necessary to avoid contact of the product with the skin, as it may cause a burn or an allergic reaction.

2. The nail along with the cotton pad is wrapped in foil. If fixation is insufficient, you can use tape or adhesive tape. These manipulations are performed in turn with each finger.

3. Each finger should be in foil for 10 to 20 minutes. This time is necessary for maximum separation of shellac from the nail surface.

4. After this time, the compresses are removed in the same sequence as they were applied.

5. The layer of softened shellac is carefully lifted with an orange stick and removed. Remains of shellac from nails can also be scraped off with this device; you should not use much force - this can injure the nail plate.

6. When all the coating has been removed, the nails are polished with a special file or buff.

if you need to remove not shellac, but gel polish, it is better to remove the top layer with a router to facilitate and speed up the procedure;
if a new coating is planned after removing the shellac, it is enough to remove the top and color layer with a file or buff without touching the base layer;
shellac (gel polish) will come off easier if you warm up your hands before the procedure;
in order to protect the skin from the effects of acetone, before applying cotton pads, you should apply Vaseline or oil to it;
To prevent the softened shellac from hardening, the foil must be removed from each finger in turn.

The video below clearly illustrates the procedure for removing shellac:

Method #2: Dipping your fingers in nail polish remover

You will need:

A small container that can fit the fingertips of both hands.
Nail polish remover or isopropyl alcohol.
Fat cream.
Orange tree wood stick.
Buff or file for polishing.

Before the procedure, you should wash your hands thoroughly. Then you need to pour the liquid into a container, lubricate your fingers with cream and dip their tips into the container. You can keep your nails in it for about 8 minutes. Then the softened shellac is removed using an orange stick. Hands are washed again and the cream is applied again.

Method number 3: Cutting off shellac

This method is the most risky.

The top can be filed using a file or a highly abrasive buffer for the natural nail surface. It’s good if you have a nail milling machine at home.

So, this method can be safely used only if you leave the base coat on. It is very easy to distinguish it from a natural nail: it is not transparent, has a soft milky color.

Method number 4: Special shellac remover

A specialized shellac remover differs from acetone in its composition, which helps to remove the coating from nails as quickly as possible.

This liquid also contains acetone or isopropyl alcohol, but along with these aggressive components, glycerin, vitamins A and E, vegetable and essential oils, petroleum jelly are also often added to it. These components provide the necessary care for the nail plates, saving them from depletion.

That's why the best option would be to purchase a special shellac remover. You can buy such a product at any store that specializes in selling manicure products, or order it on specialized websites.

Removing shellac using a special product differs little from the first method, the only difference will be the reduction in the duration of keeping the fingertips in the pads - To soften the coating in this way, 8-10 minutes are enough.

Advantages and disadvantages of home methods for removing shellac

The undoubted advantage of the first method is its low cost.– you don’t need to spend money on tools and materials; usually they can be found in every home. If you do have to spend money, they will be enough for several withdrawals. The advantages also include saving time - the procedure can be performed without waiting in line to make an appointment at the salon.

There are more disadvantages - some inconvenience is possible (when removing the coating on the right hand, the foil slips, when the nails of the first hand are wrapped in foil, it is difficult to prepare the other), an increase in the duration of the procedure up to an hour - when treating hands alternately, the risk of injury to the nail when using metal tools, or skin, exposure to a fairly aggressive liquid on the nails.

The advantage of soaking nails in nail polish remover or isopropyl alcohol is the speed of the procedure, the ability to observe the destruction of shellac and control the process. A significant disadvantage is the aggressive effect of the liquid on the skin and nail surface (drying), as well as possible injury to the nail surface when removing shellac with a metal pusher.

Cutting the shellac coating down to the base layer has its advantages - saving time, the ability to immediately apply a new coating. But with all this, you can touch or inadvertently cut off the entire top layer of the nail plate, thereby injuring and thinning it.

Removing shellac coating with a special liquid has more advantages than disadvantages. The first include the minimum time spent, the presence in such a product of components that can have a positive effect on the nail surface. The only disadvantages include possible inconvenience when removing the coating from nails yourself, and the risk of damage to the nail plate if you use the pusher carelessly.

Benefits of removing shellac in a salon

The most significant advantages of the procedure done in the salon are shortening the process duration due to the use of professional liquid, eliminating the risk of injury to the nail plates, complete removal of shellac without the remainder of a microscopic film. The specialist can also select suitable care products for the nails after removal.

Craftsmen often use special devices with various attachments - milling cutters. This significantly speeds up the procedure. These machines can be used when, after removal, a new coating will be applied, in which case the base layer is not removed.

Differences between shellac and gel polish

The word “shellac” often means not only gel coating produced by CND, but also other gel polishes. This definition is erroneous, since these products differ from each other in composition, consistency and properties.

Main differences:

before applying shellac, the nails are treated with a degreasing agent; before applying gel polish, the nails are treated with a primer and the top layer is removed from the nail plate;
Unlike gel polish, shellac does not contain harmful components such as formaldehyde and toluene;
removing the shellac coating is quite simple - you just need to use a special liquid, but gel polish must first be filed down, and then use a liquid with an acetone base;
shellac is more durable, but more expensive than gel polish.

With all the convenience of shellac and gel polish coating, you should not forget to give your nails a rest. That's why you need to take breaks between coatings, they should be 10-14 days.

Restoring nail plates after shellac removal

Often, after removing the shellac coating, it is discovered that the nail plates have weakened and become thinner. This means that a break is necessary, during which the nails are not treated with wellness treatments. During such periods It is better to give the nail plates a rest and avoid applying even ordinary varnishes.

There are a huge number of simple recipes. Some of them:

Add 1 tbsp to 100 ml of warm water. l. sea salt and 5-6 drops of iodine. You need to keep your nails in this bath for about 20 minutes, then dry them and apply a rich cream.

Bath with the addition essential oils. You will need 250 ml of warm water, sea salt - 1 tbsp. l., grapefruit, tea tree and cedar oil - 1 drop each. Mix all the components, keep the nails in the resulting liquid for 10-15 minutes, then dry them and use a cream to moisturize or nourish the skin.

In order to strengthen the nail plates, you can use oils: almond, lemon, eucalyptus, chamomile, rosemary, sandalwood, apricot. To restore the structure of nails, you need to use oils: geranium, rosehip, tangerine, avocado. To get rid of it effectively use lemon oil.

Thus, to safely remove shellac at home, it is necessary to follow the technology for removing this coating and not carry out manipulations that could damage the nail plate. Don’t forget about periodic restorative procedures for nails.

Manicure is one of the mandatory procedures for every self-loving girl. Today, you can reproduce any colors and designs on your nails, and naturally you want them to last as long as possible and not peel off. Nails coated with regular varnish quickly become unsuitable when in contact with water and household chemicals. Naturally, this does not suit anyone. That is why shellac has taken a leading position in the nail industry.

Ordinary nail polishes are almost a thing of the past. The most popular nail coating at the moment is shellac. This is a special hybrid of gels and varnishes that lasts on the nails for a long time and does not harm the nails.

Shellac coating does not require special extensions, but perfectly seals and protects the nail plate. Depending on the manufacturer and the care of the owner, the shellac coating lasts from two to four weeks on the nails. And when the time comes to change the manicure, many people are faced with the question of how to remove shellac from nails? This will be discussed in more detail in this article. Below is an excellent instruction tested by many girls.

Removal at home

In order to remove shellac, it is not necessary to visit a beauty salon. Removing shellac yourself at home is very easy. First of all, you need to stock up on a list of tools and materials, and also strictly follow the technology for removing shellac. First of all, you will need nail polish remover or ordinary acetone, just not technical acetone (this can injure the delicate skin of your hands).

List of necessary supplies to remove shellac at home:

Foil (food grade),
Nail polish remover (acetone based),
Stylus,
Compressed cotton wool,
Cuticle moisturizing oil.

You can erase shellac at home by following these steps:

Cut the cotton balls into two halves. Prepare ten of these semicircular cotton pads.
The foil also needs to be cut into ten rectangles large enough so that you can wrap your finger with such a leaf several times.
Using a rough file, go over the surface of the shellac, making the top protective layer rough. Do not press too hard to avoid damaging your nail.
Soak a cotton swab in acetone and place it on the nail plate. Make sure that the cotton wool is located over the entire surface of the nail.
Secure the cotton wool on your finger with foil, wrapping it around your finger. Leave the liquid on your nails for ten to fifteen minutes.
In order to remove softened shellac, take a stylus (a special stick made of orange wood), use it carefully so as not to injure the cuticle and nail plate.
If the shellac is still firmly in place, you can repeat this process again.
At the end of the procedure, moisturize the skin of your fingers with nourishing oil.

To understand in more detail the essence of this procedure, how to remove shellac from nails, watch a video about it. A clear example is always easier to understand.

Removal without foil

In order to remove shellac, you do not always need to use foil. A special cling film can be an excellent alternative. The procedure for working with film is similar to the procedure for working with foil. In addition, you can simply use small containers for acetone and immerse your nails with shellac in them. Then you won't need either foil or film. This procedure is carried out as follows:

Apply a very rich cream to the skin of the fingers around the nails and cuticles, over which we stick a patch. This will help avoid drying out the delicate skin of your hands.
Pour shellac remover into a small container and dip your fingers in there for five to seven minutes.
Carefully remove the patch from your hands. In order to remove softened shellac, take a stylus (a special orange stick), use it carefully so as not to injure the cuticle and nail.
If the shellac is still firmly on the nails, you can repeat this process again.
At the end of the procedure, moisturize the skin of your fingers with cuticle oil.

Special orange sticks can also be replaced with a plastic pusher from a manicure set. It is not recommended to use a metal pusher. It will most likely injure the nail, which has softened in acetone.

Over the past few years, manicures with shellac coating have been very popular. And this is not surprising, because it makes your nails look flawless for several weeks. And there is no need to repaint them often. Therefore, many women liked him.

However, sooner or later the coating will still have to be removed. And here almost every girl faces a dilemma: where is the best place to do this? In the salon or at home? We invite you to understand this issue and find out how you can easily remove shellac at home.

Professional salon products

Shellac gel looks impressive on nails. But after a couple of weeks, when the nail plate grows, the appearance of the hands becomes unkempt. Therefore, it is imperative to remove the gel on time.

Product Remover liquid is designed specifically for the safest possible removal of gel polish and works great with Shellac coatings. A small volume (about 200 ml) is produced especially for home use.

For those who often use this solution, there is also a large package. They use it to remove shellac in a salon, so some of them sell this solution in portions.

For convenience, the company has also released cotton sponge covers for nails. They fit comfortably on your finger and don’t move out. This allows the coating to spend the required time under the influence of the solution, and the girl does not experience discomfort during the procedure.

To remove shellac as carefully as possible, you can use other professional products. For example:

Nano Professional;
Bluesky;
Nourishing Remover.

They remove varnish quickly and carefully.

The classic scheme for removing gel polish from a nail using the above products is extremely simple.

First of all, hands must be washed with soap and dried.
A small amount of liquid is applied to the sponge (so that it is completely saturated with it).
The sponge is attached with the wet side to the nail and secured to the finger using Velcro. This procedure is repeated on each nail and left to act for 10 minutes.

After the time has passed, the nail that still has the sponge on it is lightly massaged to remove any remaining shellac. After removing the paper base, the nail should be clean of coating. If there are any traces of shellac left on it, the pattern can be repeated by again wetting the same sponge and applying it to the nail.

Homemade alternatives to professional solvents

Remover is a special salon product that softens the dense structure of hardened shellac. Its less concentrated version is nail polish remover, which is freely sold in any cosmetics stores. In search of a suitable composition, some women go to the construction department of retail outlets.

Acetone. Most often this product is sold undiluted. It can handle shellac without any problems, but you will have to take extra care to protect your skin. Acetone can not only dry out and thin the skin, but also cause allergic reactions.
Isopropyl alcohol is also able to soften gel polish. In addition to irritating the skin, it is dangerous due to its unpleasant pungent odor.

Both agents are used as described above. Do not allow acetone or isopropyl alcohol to come into contact with your hands for more than 15 minutes. Be sure to apply nourishing cream and nail oil afterwards.

It’s not difficult to find a replacement for a professional product, but for the most part these are specialized liquids for completely different jobs. Your pens deserve the best, so you shouldn’t test aggressive compounds on them.

Acetone and nail polish remover

Special solvents from the gel polish manufacturer are, of course, much more convenient to use than improvised means. However, if there is no access to such a liquid, and it is necessary to quickly remove shellac from nails, you can use an acetone-containing solution with a concentration of up to 99%. You can find this in specialized stores, since the fifty percent product is most often presented on the shelves.

How to remove shellac at home? It is enough to use the above concentrate and several cotton pads. The procedure is carried out on nails free of dirt and grease and clean skin of the hands.

Since it is impossible to avoid contact of acetone with the skin when removing it yourself, you should try to protect the latter. Fat cream or Vaseline are suitable for this. A small amount of product is applied to the skin around the finger. The layer should be about 1-1.5 cm wide and of optimal thickness.

At the stage of preparation for removal, cotton sponges can be cut into sectors, which will be slightly larger in size than the nail plate on each finger. Additionally, pieces of foil are also prepared. They should be about 5cm wide and 10cm long. This size will allow you to cover the nail plate and wrap the foil around your finger, securing it firmly.

Worth knowing! Using foil to remove gel polish at home enhances the effect of acetone and prevents it from drying out. In this case, the coating is removed faster and with better quality.

"Severina." The most popular manicure remover This is an inexpensive but quite effective product. Dissolves varnish in twelve minutes. Can be used for natural and artificial nails.

"Solomeya" This is an inexpensive product, but unlike other special liquids, it dissolves the coating in about twenty minutes.

Any traces of gel polish soaked in liquid can be easily removed using a manicure set, especially an orange stick. It is strong enough to cope with such a task, but also relatively soft so as not to scratch the nail plate.

Using the sharp side of the stick, you need to carefully clear the plate towards the edge of the nail after the varnish has been removed as much as possible using the solution.

Without foil

What to do if you suddenly don’t have foil on hand? Don't be upset, you can find a way out of this situation. There are several ways to remove old coating without using foil.

Now special plastic clips for removing gel polish have appeared on sale, which greatly facilitate the task. The need to use foil is completely eliminated, but the technology remains the same - cotton pads soaked in a special product are applied to the nails and secured with clips. After the time indicated on the product has passed, they are removed, and the remaining shellac is removed using a pusher or an orange stick.
If you don’t have foil or special clips on hand, you can use regular cling film. This is an excellent alternative to standard methods, since the film does not allow air to pass through, which speeds up the process of shellac destruction.
Another option is polyethylene and roll plaster. The principle is almost the same as using cling film. Take a regular plastic bag and cut 10 pieces from it. Next, follow the shellac removal technique. Place the soaked cotton pad on the nail, wrap it tightly in plastic and secure with a band-aid, preventing air from getting inside.
There is another method for removing the coating - cut off the top layer of varnish and place the nails in a small bath of acetone so that the liquid completely covers the nails. After 8-10 minutes, you can try to move the shellac with a stick.

Other means

At worst, you can remove shellac without a special liquid.

The method is suitable for experienced ones, since we will completely remove the gel polish with a file. You will need several files of different hardness and a buff. Simply begin to slowly remove the coating, layer by layer. The procedure will take about an hour depending on the skill. Do not press under any circumstances. Be careful around the rollers and cuticles! In such areas, I recommend changing the nail file to a soft one so as not to damage the skin. If you are not confident in your abilities, leave the bottom base layer. It’s better to walk with it than to saw through your nail. It is very painful and takes a long time to heal. It is not advisable to thin the plates. At best, you will have to treat them and wait for them to grow back before applying the decorative coating again. At worst, they can move away from the fingers. Finally, treat the surface with a buff. You will hide defects.
The second method also involves maximum filing (remembering that the nail plate should not suffer!). Then place your hands in hot water (similar to preparing for a trim manicure). A thin layer of varnish will gradually come off when left in water for a long time, but you will still have to help it with an orange stick. This method most often works with a poorly done manicure, so there is no hope for its effectiveness if the master did his best.
An additional method for those who are armed in advance. You can buy special napkins in stores and on trading platforms (for example, Aliexpress). They are hermetically packaged, the internal contents are soaked in nail polish remover. All you have to do is open the bags and put them on like caps. Next, proceed in the same way as with the first method: remove the residue and treat the nails.

Salon and home cutting: advantages and dangers

You can only file off shellac from extended nails if you decide to update the color scheme. But it is highly not recommended to remove the top layer from a natural plate yourself. If you don't have experience, you risk being left without a good nail plate. This procedure is performed exclusively with a special apparatus by a highly qualified specialist.

Experts recommend removing shellac not on your own, but in a salon with a specialist - to do this, use an artificial nail remover (it is applied to the coating for about 10 minutes, after which it is easily removed). There is no need to file off shellac like artificial nails!

When choosing a salon, pay attention not only to the experience of the specialist, but also to his attitude towards cleanliness. He must work with gloves and properly handle and store the working tool.

Restoration of the nail plate after the procedure

After you remove the shellac, the plate becomes sensitive and vulnerable. The fact is that before applying shellac, the first, shiny layer of the nail is filed off, that is, it becomes thinner. Therefore, it is important to properly care for your hands after applying and removing biogel. Taking care of the nail plate can be reduced to two basic principles:

hydration;
nutrition.

To maintain moisture levels in the skin and nails, baths with nutrients (sea buckthorn, aloe, etc.) are excellent. Sea salt is added to them to strengthen the plate. To enrich the nails and skin with nutrients, oils (with vitamins) or glycerin-based creams are used.