Sew beautiful house slippers with your own hands. How to sew men's slippers. Pattern of slippers with a backdrop
Having a good pattern, you can sew comfortable slippers with your own hands, because this is a necessary thing in any home.
We will work with existing fabrics, we will not buy anything, we will use material from unnecessary old things, as well as pieces of leather from worn-out handbags or even boot tops.
In any home there will be skirts, jackets, drape coats that you would hate to throw away, but will never wear again. Usually they are lying around in a bag somewhere in the basement. At least that's how it is for me.
Even if you've been happily wearing them for a long time, there are always good pieces there. Let's give unfashionable, but still very good things a second life.
One tip: if you have an old wool sweater lying around, you can felt it in the machine, dry it, iron it - this is an excellent material for sewing homemade slippers! Once felted, it is no longer subject to shedding.
Here are presented, by and large, three patterns for cutting and sewing soft, cozy slippers with your own hands.
There are several more options for soft slippers with knitting patterns; by following the link you will find both crocheted and knitted, as well as varieties, for example, only with crochet trim. Slippers from an appendix to an old magazine, poor quality photo, but I’m convinced that the material is still relevant.
2 sewing patterns from Peasant Woman
Who doesn’t know, in Soviet times there were magazines for women called Peasant and Rabotnitsa. Frankly speaking, the name is not very good, but at one time they were loved by many. Recipes and patterns were given there. It’s a pity that there were no good color pictures, but we were glad that we had them.
Overall, the materials were very useful and the ideas inspired creativity. Since I recently came into possession of the files of this publication, I present something useful.
Using almost the same pattern, you can sew both regular flip-flops (without backs) and fully closed slippers.
The first model is more open, the second one has an original valve. Size 36-37. If a larger size is needed, then increase the pattern along the entire contour. If the leg is narrow, then increase only in length.
The simplest material will do, perhaps even one that has been collecting dust in the pantry for a long time. For the upper part you need corduroy, drape or soft leather. You can use thin fabrics: fold them in several layers and stitch them for density. It is better to make the sole from the leather of old boots or bags.
Inside the slippers you can put an insole of leather, fur, or drape.
Cutting details (1 piece each - this is for one slipper, without seam allowances, we will take it 0.5 cm):
- Valve
- Sole (cut along the inner contour of the bottom part)
Sewing order:
Cut out parts from the material. Process the top. Cut a slot along the inside for the leg. We either hem the inner edge or trim it with a beautiful braid or edging. You can also decorate it with fluffy fringe.
Next we work with the bottom detail. We cut out the sole separately and glue it with instant glue. Now you can connect the top and bottom parts. First, we tighten the top piece with thread along the outer edge. We do the same with the bottom part. Both parts must match the points from 1 to 10, which are written in circles.
They will look a little different - more gathers on the back of the top and the nose of the bottom. We sew them from the face.
You can make a decorative seam with leather or thick colored thread or lace. Or treat it with braid. One slipper is ready. Let's move on to the second one. Just remember that the pattern will be reversed in relation to the first one.
If you decide to decorate your slippers with original flaps, then cut out part 3. Finish the edge. You need to sew the valve along line 11-12. It is secured with ties attached to the point marked with a cross on the top part and the valve itself. The ties can be a continuation of the braid with which the edge is finished.
Option based on a pattern from Burda
The following method of sewing slippers for the house was proposed at one time by the magazine Burda. True, because of the pom-poms and the sharp, upward-looking nose, they look more like little slippers. :)
The pattern is simple, first you just need to measure the length of your foot - it should match the length in the diagram. Enlarge it in a graphics editor to the desired width and print it on a printer.
The black part is the sole, and the red part is the upper.
The picture below briefly shows the operating procedure. Light green indicates the lining - the inner part, and a colored pattern - the outer part.
Increase the pattern of the sole and top to 28 centimeters.
Description of work
- For each slipper, cut out two uppers from material and one sole from felt. To get shoes for the right and left feet, cut one sole as in the pattern, and turn the other over to get a mirror image. Do the same with the side parts - two along the pattern, two along the inverted side. Additionally, cut out a fleece top and sole for each slipper. This will be the inner part, the lining. Don't forget a 5mm seam allowance.
- Place the sides of the fabric face to face, pin them together, and then sew them together. Press the seams in different directions. Repeat for the inner side elements (Fig. 1 and 2).
- Fold the outer and inner sides for each slipper and pin them face to face, sew along the inner circumference (Fig. 3). Make notches on the circumference with scissors, turn it inside out, iron it.
- Place the lining and soles facing each other. First sew on the sole, and then the seam on the heel (Fig. 4).
- Place the lining and sole together, right sides together, and stitch, leaving a small hole of 8 cm (Fig. 5). Connect the heel seam.
- Turn the slippers inside out through the hole left, then carefully sew up this hole by hand (Fig. 6).
- Make a pompom from wool and sew it to the slippers (Fig. 7).
Winter has always been famous not only for the cold weather outside, but also for the cozy, warm atmosphere in the house. At such a time, you want to warm not only yourself, but also those who are near you. So why not sew warm slippers for your household? From this article you will learn several ways to sew fur slippers with your own hands, patterns will help you quickly understand all the nuances, as a result, you will spend a minimum of time and money on this, patterning sheepskin chuns. You will learn how to sew life-size boots at home and how to sew children's slippers.
Cozy home accessory
For the upcoming work, you should stock up on some materials:
- The finished pattern - the process of making it will be described below.
- Soft leather - will be used as an insole.
- Fleece.
- Decorative elements as desired.
Important! Fur can be either artificial or natural.
To make a pattern, you can use two methods:
- Print the finished one, then adjust it to fit your leg or the leg of the person for whom the garment is being made.
- Take old slippers and cut out two parts along the contours - this method is much easier than the previous one.
Now you can proceed directly to manufacturing the product. In order to sew fur slippers with your own hands and make patterns, you must follow this algorithm:
- Take one of the parts and cut it into two equal parts.
- Attach the resulting parts to a sheet of paper and trace them.
- Now you need to measure the width of the flat part of the toe of the shoe, and then mark it with noticeable dots, setting aside 40 mm from the edge. After this, you need to measure the length of the insole.
- Glue a rectangular piece to the resulting spout and cut out the middle in it. As a result, you will get a suitable pattern.
- Cut out 6 main parts according to the patterns, adding 4 cm for allowances.
- Sew the fur and fleece parts together with allowances so that the fur is inside the product. Then sew on the fleece sole - there should be no allowance on it.
- Insert the fur blank into the fleece blank, sew, leaving space so that the product can be turned inside out (it is necessary that the fur is inside the slipper).
- Sew up the product, sew on a leather insole.
- Decorate the slippers as you wish.
Ugg slippers made from an old sheepskin coat
If you have some old sheepskin coat in your house that you are about to throw away, then do not rush to do so. You can give this seemingly unnecessary thing a new life, for example, sew slippers from an old sheepskin coat.
For further work you will need:
- An old sheepskin coat.
- Leather for the insole.
- Ready-made patterns.
- Durable thick threads.
- Decor elements.
Sewing master class
The process of their manufacture is not as complicated as it seems at first glance:
- The first step is to create a pattern for the insoles. To do this, just trace your foot or the foot of the person for whom you are sewing slippers.
- Transfer the resulting sketch to the prepared sheepskin coat.
- Make the side parts of house shoes in a similar way.
Important! When cutting out the details, you need to take into account the width of the ankle and the standard size of your shoes.
- Transfer the patterns to the sheepskin coat material, leaving approximately 1.5 cm for seams.
- Cut out the intended blanks and begin to sew them together, using prepared strong threads.
- Decorate the finished product to your liking.
The slippers are ready!
Classic slippers
After making a pattern for the sole of the shoe and its top (this time it is as simplified as possible), you can proceed to making fur slippers with your own hands:
- Cut the soles, adding 5 mm for allowances.
- Reduce the gasket pattern by 7 mm along its entire contour - this is necessary to avoid thickening of the seams.
- Glue the leather soles together and carefully trim all the edges.
- Glue the sole along the edges to the upper part of the slippers with the seam facing out, not forgetting to align the control marks.
Important! If the model is closed, then you need to additionally add the excess length of the part on top along the toe part. If it is open, it is necessary to adjust the length of the upper part so that the foot is held tightly in the slipper.
- Connect the top of the product and the sole.
The product is ready!
Important! The seam can be covered with a decorative leather braid or other decorative element that suits the style. To ensure that the finishing elements are well secured, you can use a glue gun, which is designed specifically for needlework.
Video material
To protect your health, on cold winter evenings you need to wear warm slippers, which can be purchased in the store at a low price. However, it will be much more pleasant for both you and your loved ones to wear hand-sewn fur slippers at home.
Learn how to make house shoes. It's very simple and easy. Once you try it, you will be drawn into this exciting and useful activity. Basically, we need different shoes for different life situations. One shoe that we wear to work, and it usually follows a certain dress code. Shoes for sports, worn on vacation and, of course, at home, are another matter. And these shoes can be chosen according to your imagination.
rag slippers
The most common hand-sewn home slippers are made from fabric.
The material for them can be found in any home and even a child can cut them out!
Fabric house shoes are the lightest in weight.
glamorous leather flip flops
House slippers are considered a special delicacy,
sewn from pieces of leather.
They are the most durable compared to other indoor shoe options.
Look cool with any home clothes and give it a special shine
felt galoshes
Separately, it is necessary to note the beneficial properties of felt slippers. They are soft and warm, wearable and easy to sew due to their loose texture. They are also believed to be medicinal.
homemade fur slippers
This is a whole professional product. Every family has an old fur coat or hat from which they can construct homemade shoes. You can take worn-out slippers or moccasins that were comfortable in the past, torn, and rip them open. The resulting parts will serve as a template for the pattern.
uggs are the best friends for our feet
Do your joints hurt? Sew yourself some homemade UGG boots. They are sewn simply and very quickly from four parts. You can use an old sheepskin coat.
Cut out four parts: sole, heel, front cuff, toe. Sew all the parts together with a thick, strong thread, with the seam facing up. Tuck the top
white fur boots
House shoes, boots, also made with your own hands at home. It is very relevant for people who are constantly cold or have joint problems.
felt booties
Very easy to sew. Outline the child's leg with an allowance of 0.5 cm. Cut out the top and accessories (butterfly, leaves) from different colors of felt. Sew the top to the sole using a sewing machine. Sew a rectangle of Velcro on the inside of the fasteners.
baby homemade chuni
The upper is made of fur fabric inside on a knitted base. Suitable for the youngest family members. Three parts are cut out: a whole part of the side parts of the upper, the toe part of the upper with a tongue, and the sole. Sole made of thick fabric or leather. The rest of the details are made of fur fabric. All parts are sewn together using an over-the-edge seam.
denim house shoes
Looks very stylish. Of course, she is loved primarily by fashionistas and fashionistas. Suitable for all ages. Both young and old will feel stylish and comfortable in them. A pattern is made on paper. It is used to cut out details on the fabric. Dense material is used for the sole and lining. The insole is made of pleasant fabric. All parts are connected according to the diagram and you're done.
fur children's paw slippers
For these slippers in the shape of an animal's paw, the sole is cut out in two copies for each slipper (one is the sole, the other is the insole). To trace your foot with a pencil or pen, it happens right away right on the back of the fur fabric. A strip of 6-10 cm for the cuff is cut out separately. The top of the slippers is cut in one piece. The seam of the upper is made at the heel. The cuffs fold in half. All parts are sewn together.
Patterns with sizes of home slippers master class
It’s quite easy to sew ordinary house slippers using ready-made patterns. They are redrawn to life-size size on paper. Cut out the patterns and trace them on the fabric. Cut out the required number of parts. We start assembling using a standard sewing pattern.
- The upper parts are sewn together with the insole, the upper is blank
- Sew or glue the sole elements, the bottom blank
- The bottom and top blanks are connected with glue and stitched for strength.
- Decoration or fasteners, lacing are attached
sew home slippers using patterns
Use these patterns to quickly create simple slippers. You will need any material for the top and thick material for the bottom. Strong threads and thick needle.
bunny boots, master class
Fun and comfortable bunny boots will warm you up and lift your spirits. It's not difficult to sew and anyone can do it.
- Fabric is selected. The material used for manufacturing is soft and dense, plush, velor or fleece. Leather or substitute for the sole. To give shape, padding polyester (but not necessary).
- Tools are selected. A sheet of paper for a pattern, a pencil, bait needles, scissors and a sewing machine.
- A pattern is made of two/three, if with padding polyester, of the main parts plus ears and a tail with allowances. Halves are drawn on the pattern.
- These slippers have two/three layers of material. Upper velor, middle padding and inner lining
- The sole is made new from leather or cut from an old one according to a pattern
- All parts are cut out from the main fabric.
Pin together the parts.
Stitching of all the details of the layers occurs for each separately.
The ears are sewn together in advance.
Ears are inserted. The finishing seam is made.
This is how the boots turn out from the wrong side.
Turn it right side out and make soft folds on the top of the boots.
The boot is connected to the insole.
This is what one inner layer looks like.
The outer layer is inserted and cleaved with the inner one from the inside out.
It is stitched along the edge, but leaves a small hole unsewn. Through it it is turned right side out.
This hole is then stitched.
The tails are made separately. Two circles are cut out, folded right sides inward and stitched together, leaving a hole. They are turned inside out and stuffed with padding polyester and the remaining hole is sewn.
The tails are located in the center of the back seam.
Then these tails are attached to the bootleg.
This is what happens in the end.
Bunny boot slippers are loved by all family members. Children are the most delighted. They willingly take part in the production of such shoes.
How to cut fur slippers with your own hands, step by step with photos
Experienced needlewomen advise starting to sew slippers with simple slipper models. They can be open or closed from any available material. By making such slippers, you can learn the basics of patterning and sewing house shoes.
The technique is very simple. To begin with, a pattern is made. Using the pattern, the contours of the parts for sewing are applied to the material. For the sole, use dense and thick material. The parts are sewn together and the decorations are attached to the finished slippers. For ease of wearing, a low heel is glued to the sole. This can be done conveniently with a glue gun.
their unique sizes are taken, patterns are made
You will need to take the following measurements from your leg. Foot circumference along the outer edge, length of the top of the slippers along the inner edge, along the outer edge, heel.
Starts with the circumference of the foot. To do this, place your foot on a blank sheet of paper. Old unused wallpaper is used for this.
You can tear out the middle of a notebook into a square. Outline your mark with a pencil or pen. That's it, the soles for the slippers are ready! The heel part of the “heel” is 1/3 of the length of the foot.
Now other measures are being taken. All measurements are taken on the foot in accordance with the already made sole pattern. To do this, place your foot on the pattern of your foot. For the top of slippers. The length of the top of the slippers is measured.
To do this you will need a “centimeter”. The “centimeter” is located from the edge of the big toe on the foot in a straight line to the level of 2/3 of the length of the foot.
The next foot width measurement is needed for the top pattern. This is the width along the inside edge along the rise line.
This measurement is taken to determine the distance from one side edge of the foot pattern to the other. The measuring tape is placed across the instep of the foot.
The pattern piece is slightly shaped, but according to your measurements.
Everyone is ready with personal measurements for future shoes. And according to them, patterns are made according to the sketches of the drawings.
patterns of all parts are made from materials
First, the pattern figures are redrawn “by eye” from photos onto paper. Then they are adjusted taking into account the required dimensions. A paper pattern is cut out with small allowances. Applying it to the leg and finally adjusting it with scissors.
As an example, work is being done for a male model. For women's, simply take a different material, size and add decorations (optional).
For this you will need:
Top part:
- Faux fur. An old fur coat or vest can come in handy here. For the top layer of the top of the slippers (on the left in the picture).
- Batting or a piece of cloth for cleaning the floor (not used), for insulation (center in the photo).
- Thin, pleasant fabric for lining (on the right in the picture).
Bottom, sole.
- Something durable for the soles. It can be a piece of felt, thick and rough leather, or rubber. The sole of an old shoe is used, a little larger in size, so that a part can be cut out of it to the desired shape (on the left in the picture).
- Batting is also used here for insulation; a pad is cut out of it, slightly smaller in size than the sole (centered in the photo).
- For insoles, dense but soft fabric is used. You can use ready-made insoles, which are sold at any hardware store. Buy a slightly larger size and cut it out according to the pattern (on the right in the picture). The size of an insulated pad.
An additional detail is an elastic band 3 cm wide or a synthetic strip of the same size.
To make women's or children's, you need to take the appropriate size, select the appropriate material and decorate with decorative elements.
Step-by-step instructions on how to sew fur slippers with your own hands
The details of the fur slippers are sewn together using a sewing machine or by hand sewing. It will be faster on a typewriter, but exclusive by hand. The choice is yours.
To assemble the parts you will need:
Needles for chopping parts to pin all the parts of the top together.
All three parts are attached together from the wrong side.
The stitched parts are trimmed 2-3 mm along the stitching. The protruding fur and the remaining threads along the edges of all layers are trimmed. It turns out to be a single piece of the top of the slippers.
The elastic tape is placed face down on the front side of the part along the inner edge of the top and stitched.
The sewn ribbon is turned on the wrong side and once again attached with a “multiple zigzag”. Special knit stitch on a sewing machine.
On the wrong side, the ribbon is cut very close to the stitching, at a distance of 2 mm.
The wrong side of the upper part is combined with the right side of the insole from the bottom. The middles of the parts must match.
The side marks are also aligned and secured with needles.
For convenience and even stitching of the parts, they are first swept out.
The insoles are sewn to the upper part. They work from the inside out.
Next, a ribbon is placed face down on the front of the slipper and the edge of the strip is folded.
The tape is attached to the front side of the slipper along the entire circumference using machine stitching
This is what we get in the end.
The tape is turned back to the inside of the slipper and secured with a “multiple zigzag” stitch. The entire upper part of the slipper is made.
The “heel-heel” is glued to the sole with a glue gun.
If the part is not glued very well, then it is heated with an iron, the glue will melt and firmly connect the parts.
In the same way, the sole and insulation are glued from the wrong side. To ensure a strong connection, iron it.
As I wrote above, the insulating pad should be slightly smaller than the sole.
The toe part of the sole is coated with glue and attached to the toe part of the top of the slipper.
In the same way, the back parts of the sole and the upper part of the slipper are glued together.
The final step will be gluing the entire sole to the upper part of the slipper along the entire perimeter. It is recommended to iron the gluing areas with a hot iron for greater reliability. If the slippers are made of fur, then it will snag in these places. But it's not scary. Keep the fur side over the steam for a few minutes and everything straightens out.
So the house slippers are sewn. As you can see it is very simple and fast.
Fur makes warm, soft and beautiful slippers. They are easy to make and can be done by beginners. It is enough to understand the basic points in sewing slippers and you can move on to more complex materials, such as leather.
DIY children's slippers, photo 3 options
Slippers are cut in the shape of animals or cartoon characters. The shape can be in the form of boots or sandals.
corduroy sandals
For these sandals you will need thick corduroy fabric with any pattern for the upper part of the sandals, a piece of thin suede for finishing the edges with piping and for the fastener straps, 4 buttons instead of clasps.
The upper part consists of 2 whole different parts, the binding for the edging and the strap for the fastener. There are button holes along the edges of the clasp. Buttons are sewn on the upper part on the sides.
It is better to make the lower part from three identical parts in shape. Two of which, the sole and insole, are the same size, and the middle one is 0.5 cm smaller around the entire circumference.
A piece of corduroy is cut out for the top (on the left in the picture). The second (in the center of the picture) is made of soft, pleasant fabric for the body, this is for the inner part (lining). Both parts are connected to each other with a strip of suede. Place the pieces facing inward. Turn inside out and steam with an iron.
The middle part of the “loop” is tucked inside the sandal and hemmed. Along the bottom of the resulting top, from the outside, another suede trim is sewn face to face along the entire circumference. Fold the resulting border onto the wrong side of the top of the sandals and hem it.
For the fastener strap, a rectangular piece is cut out, sewn face inward and turned inside out. The ends of the parts are turned inward and hemmed. Slots are made along the edges of the fastener for buttons and the edges of the holes are sewn so that the fabric does not fray.
The upper part of the sandal is connected to the lower part of the sole using over-the-edge stitches made with thick nylon thread.
children's slippers in the shape of Czech shoes
Made from felt or thin felt. Main details: one-piece upper, outsole and insoles. The jumper at the fastening site is crocheted from yarn.
The mouse's face is made from appliqué cut from fabrics of different textures and colors. Each piece is sewn with “felt stitches”.
The ears are made from two circles, a larger one in size and a smaller one of a different color. The eyes are black buttons. The nose is cut out of black fabric and secured with glue. Mustaches made of thick yarn in two colors.
glamorous booties
A sports model for young fashionistas made of felt in the form of sneakers. They are sewn quickly and by hand. You will need felt or felt, two colors. Five parts of the cut: back of the upper, toe of the upper, front part of the upper "tongue", outsole, insole, padding 0.5 cm less than the insole and outsole. Lace and loop strip for decoration.
You need measurements from the child's feet. According to the obtained dimensions, patterns for all parts are made. The contours of the cut details are transferred to the fabric.
How to sew slippers and boots with your own hands, master class
House slippers are women's favorite footwear. They are beautiful and comfortable. They are always warm and cozy. By making such boots, every woman can express herself, and this creates a good mood.
To sew slippers and boots for the house with your own hands you will need:
- Fragments of “wool” or “faux fur” fabric for the main details.
- Cotton fabric (any) for lining.
- Sintepon or batting for filling.
- Felt or other very dense and thick fabric for the sole.
The patterns correspond to foot size 38. To change the size, outline your foot on the sheet, compare the details of the lower part with this sketch and thus adjust it to your size.
all the necessary details are cut out
- Start with the sole. Two parts of the sole are cut out (on the left in the picture), one from felt, the other from thick cotton instead of glass.
- For the main parts, wool or fur fabric is used. The parts are cut out in 2 copies asymmetrically (in the center and on the right in the figure).
- In the same way, parts are cut out from padding polyester for filling and parts from cotton for lining. There should be three sets of different fabrics.
process of assembling boot parts
The house slippers and boots are ready and it takes 1.5-2 hours, no more.
DIY jeans slippers, photo 3 options
Denim slippers are made from old trousers, skirts and bags. First, make a pattern based on your foot for the sole. Any thick fabric or material is suitable for this. Trace around the foot and you're done. Whatever is at hand is used as material. It could be an old camping mat, a thin rubber boat, a car tire tube, etc. Well, they classically use leather, felt, or felt for the sole.
women's denim slides
We used several scraps from old light blue jeans, a piece of felt, and pink satin ribbon for lacing and decoration.
The pattern pieces are cut out from the felt foot in 2 copies. One will be the pad, the other the sole. The same pattern with an allowance of 1 cm is used to cut out denim insoles on the bias.
A bias tape is also cut equal to the circumference of the foot. Cut two pieces of satin ribbon for bows. That's it, the pattern is done. Begin sewing slippers from the top. Fold the two parts with the wrong side together and sew them together with a seam “over the edge” along the rise line.
In the center and at a distance of 1 cm of the resulting top element, slits are made the width of a tape and a distance of 5-7 cm. These holes are processed with a “overlock stitch”. A ribbon is inserted into these holes and a bow is tied.
When wearing such slippers, the denim material quickly stretches out and you can use a ribbon to adjust the tightness of the fit to the foot.
Sew the top to the front side of the insole. The top is ready. The edge is processed with bias tape along the entire circumference. The workpiece is glued to the gasket with the wrong side and the bias tape is turned to the side of the gasket and glued.
The top of the slippers is ready. To complete the process, the upper is glued to the cut out sole and that’s it.
Czech style denim slippers
Made from denim, felt, cotton. For fastening, a large button from an old coat. Measurements are taken from the leg. A pattern is drawn according to size.
Five parts are cut out for one slipper: one-piece upper 2 pieces made of Jeans in a mirror image, fastener strap 2 pieces made of Jeans, insole 1 piece made of cotton, lining 1 piece made of felt, sole made of felt 1 piece.
Sew starting from the top. First, fold two strips of the strap together wrong side out and stitch along the edge with an indentation of 1 cm. Make a slot for the button on one edge and overcast it.
The two parts of the top are folded inside out and a strap is placed in the center. Stitched by machine or by hand.
The front side of the insole is sewn to the back of the upper. Glue it inside out onto the gasket, fold the seam allowances over to the side of the gasket and glue it.
At the end of the work, a felt sole is attached to the resulting top. Glued or stitched. Sew buttons on the sides of the slippers for fastenings.
stylish denim slippers
For this model, needlewomen use thick and thin jeans, foam rubber, felt and thick rough leather. The details are cut out according to the contour of the leg: Leather sole
Insole made of thick denim with 1 cm allowance.
- Bias tape length of sole circumference
- Felt pad
- Heel made of foam rubber and thin denim
- Top made of thin denim in the form of triangles four pieces
The upper triangles are sewn together, two folded inside out. They turn out on their face. Part of the foam heel under the thin jeans is sewn to the insole.
The insole with triangles is folded and processed with bias tape. The padding is glued to the underside of the insole and the seam allowances with the tape are turned to its side.
The sole part is sewn or glued to the entire structure. The second slipper is made in the same way.
Triangles are tied on the leg across the width of the foot.
Video: how to sew slippers with your own hands
DIY slippers in 14.5 minutes
Having direct instructions and a pattern, house shoes are sewn in a matter of minutes. It is very practical and suitable for many life moments. Do you need slippers for any purpose, please go ahead and make them!
Video: pattern of children's and adult slippers
whipped up slippers from old jeans
Knowing how to make house shoes is cool! It can come in handy in the most unexpected situations. For example, give a nice gift to a loved one. And it’s pleasant, and convenient, and beautiful.
DIY “Cookies” slippers
Creative flights of thought sometimes produce pleasant products. It’s enough to take a closer look at the old things at home and you’ll definitely find something for making house shoes. Let's say these could be comfortable slippers.
How to sew leather slippers with your own hands, step by step with photos
The most spectacular house slippers are leather ones. They last longer and remain in excellent condition.
They are sewn as simply as other types of house shoes. The only thing here is that you will need slightly different tools and materials. But, all these tools and materials can be easily found in every home.
What is needed for production:
- Faux and real leather. Priority goes to thick flaps. Entry will include old women's bags, used shoes, furniture, old jackets, hats and raincoats.
- Not a thick piece of felt
- Small piece of foam rubber
- Disposable slippers
- Non-woven fabric with adhesive backing
- Shoe glue or Moment or even super glue will do
- Special needle. Thick, curved edge. If you don’t have one, a crochet hook will do.
- Old house slippers for pattern
- For holes in the skin, a punch. If he's not there, it doesn't matter. A thick nail and pliers will do. Using a hot nail on a gas stove, clamped in pliers, you can easily burn the required number of holes.
The work begins with the soles of disposable slippers. Glue all the slots with glue and wait for them to dry.
But while the glue dries, without wasting time, unripe the old slippers in order to make a pattern out of them.
New soles are cut from the soles of disposable slippers using a pattern made from old slippers.
Four pieces of leather sole are required for the outsole with allowances of 1 cm along the contour. For the top of the slippers, 4 parts of the top are cut out, also according to a pattern from old slippers with 1 cm allowances, on the sides at the junction with the sole.
The 2 parts of the top are cut out of non-woven fabric, 1 cm smaller along the entire contour. Non-woven parts are glued through gauze with a hot iron to the front side of the top parts.
To continue making leather slippers, two upper parts are glued together. Coat the edges at a distance of 1 cm with glue and connect. This is done by weight, on the hands to give shape.
After the glue has dried, the parts are trimmed around the circumference with scissors.
The next step is to use a punch (or a nail heated on a fire) to make holes from the edge, retreating 0.5 cm and keeping a distance of 1 cm between the holes. This is done along the line coinciding with the rise of the leg and fingers.
A 7 mm strip of leather is also cut out, threaded through a needle and stitched over the edge going through each hole.
The ends of the leather tape are glued to the wrong side of the part with glue.
Now cut out insoles from felt or felt, 2 pieces. For this, an outsole pattern is used. Additionally, two half-insoles are cut out.
Two “heel” parts are cut out of foam rubber. All these parts are glued together like a “sandwich”.
First, the outsole is glued to it, the insole generously lubricated with glue is glued, then the “heel” is glued under the heel and the half-insole is glued last. This produces the basic blank for the bottom of leather slippers.
Leather soles are glued to this resulting workpiece on both sides. Apply liberally with glue along the contour of the leather parts.
The entire resulting structure dries well. Then the upper part is glued to the lower part along the side lines.
The steps are repeated with punching holes with a punch or burning with a nail. The distance is 5 mm from the edge of the slippers along the entire circumference and 1 cm from each other.
An additional cut leather tape with a thickness of 7 mm is used to stitch the entire edge of the slippers. The next one is glued to the ending leather tape and stitched in this place for strength.
Women's slipper styles are decorated with flower appliqué.
These are the simple and easy steps needed to sew leather slippers with your own hands. Such indoor shoes serve their owners for a long time. Suitable for use in the bathroom and kitchen.
DIY felt slippers, photo 3 options
For greater comfort, coziness and warmth while at home, use felt slippers as house shoes. Sewing them yourself is not difficult or time-consuming.
The felt used to make such shoes is made from dried camel, sheep or dog hair. There are many benefits from such slippers, since they are natural.
Well, what is its main benefit, besides convenience, durability and simple manufacturing techniques?
The secret is simple. Felt creates a thermal effect. In this way, spontaneous healing of the leg joints from rheumatism occurs. These shoes help with aching bones. Prevents excessive sweating of the feet.
Wearing felt slippers promotes foot massage. Blood flow increases. This leads to an acceleration of metabolism in the body. It is recommended that old people, children and sick people at home wear only such shoes.
Slippers are easy and quick to sew
The pattern is made from thick felt. The leather sole is cut separately and is 1 cm smaller around the perimeter.
The sole pattern is sewn on a machine or glued with glue using a “straight seam” of leather to the felt pattern at the location of the sole.
It is folded so that there is one seam on the side of the foot. Slots are made with a knife or scissors and a ribbon or lace is threaded into these holes. The end of the lacing is secured with a small bow.
A simple version of felt slippers
It is very easy to do from the point of view of sewing homemade felt flip flops. Made from four parts: two halves for the top and two for the sole.
The soles are made from a sketch created from a pencil outline of your foot. The top is cut out on paper randomly according to the photo. It rests on your leg and is adjusted to your size.
The seam of the top is done using a “overlock stitch”. Next, all the parts are assembled and sewn with hand stitches using a strong thread.
felt sandals
They look very beautiful and fashionable. Not to mention that it is also very convenient and useful! They are sewn from four main parts: front upper, back, insole and sole.
A pattern is made of all parts of the sandals. The insole and sole are glued together with glue. The remaining parts are sewn to the bottom using a cross stitch.
To consolidate the result, the sandals are sewn again using a “loop” seam. An additional element is a felt or felt applique decoration attached to the top of the front of the top.
stylish sandals
The main parts, lining and soles are made of thin felt or felt. After drawing the pattern, cut out the upper parts from the main fabric. This is a one-piece sandal upper, insole and sole. Additional ones are a jumper and a strap for fastening. They are rectangular pieces.
The lining is sewn on a sewing machine to the main part, folding them right sides together. The allowance is cut very close to the seam, leaving 1-2 mm. Turn it inside out and once again sew a “straight seam” along the edge, at a distance of 1-2 mm.
Rectangular patches for straps and jumpers are each folded face inward and stitched, leaving one edge unsewn. Turn the open edge inside out and hem it. Then stitch along the edges at a distance of 1-2 mm on both sides. One edge of the jumper is sewn with a “cross stitch” in the center to the edge of the nose area of the front part. A loop is made from the free end and attached.
The strap for the fastener is made in the same way, but instead of a loop it makes a slot for a button and is processed with an overcast seam. A button is sewn on the sides of the sandals instead of a fastener.
The insole is attached to the upper part with a lining along the contour. Fold the allowances under the bottom of the insole and glue them. This creates a blank for the top of the sandal.
The last step is to glue the felt sole to the sandal blank.
slippers for guests
These slippers can be made for a whole group of guests in one evening. They are done very quickly and easily. Felt material. Sewn by machine or by hand using an overlock stitch.
The pattern consists of two parts: the main one and the insole. The main part is folded and stitched. The insole is placed on the sole from below and sewn with the same seam.
Video: how to make unusual felt slippers
As life experience shows, handwork is not only a profitable activity that gives a second life to outdated and worn-out things, but it is also quite an exciting activity. There are no special difficulties in this work. Tools and materials can be found in any home.
Once you learn the basics, you can make a lot of house shoes. Enough for both household members and guests. You can also provide for all your friends and generally start your own small business. Handmade footwear. Create, wear and give.
In this master class I want to show how you can sew comfortable, soft, cute children's slippers. Children will be happy to wear these slippers in cool weather. The pattern is given for a 2 year old child.
The material used for the base was velsoft (you can replace it with fleece, insulated footer, and so on), and for the inside of the slippers I used regular knitwear. The sole is artificial suede, which will be insulated with batting.
We will need: two pieces of main fabric, two pieces of lining fabric.
On the sole: two parts made of faux suede, two parts made of batting, two parts made of knitwear.
For the ears we will need: four parts made of velsoft, four parts made of knitwear.
And two knitted pieces for the ponytails.
Let's start sewing with the ears. We take the ear pattern and transfer it to knitwear. Then we apply the knitwear to the velsoft with the right sides inward, secure it with pins and sew a stitch.
Trim the seam allowances and turn them inside out.
This is what you should get:
Take the top part of the base. Mark the line of the middle of the top edge.
We secure our ears to this middle with pins.
We take the lining, apply it to the base with right sides facing each other and secure with pins. Sew along the top edge. Don't forget to connect the lines in the middle of the top edge. Stitched and trimmed seam allowances.
We take our future slippers, fold them in half with the right sides inward and grind the back part. Don't forget to trim the seam allowances.
Let's prepare the sole. We take the batting and apply an artificial suede sole to it.
Secure with pins and stitch along the edge.
Now let's take our future slippers. We secure the velsoft base and the artificial suede sole with pins.
We grind. Trim seam allowances.
We also do lining. Just don’t forget to leave a hole of about 5 cm. We will turn our slippers inside out through it.
We stitched, trimmed the seam allowances and turned our slipper inside out.
We sew the hole with a hidden seam.
We insert the inner part of the lining into the base.
Let's give our bunny some eyes. Mark the location of the eyes and sew on the beads. The eyes are ready.
For the nose I took bright pink floss threads. I made a nose.
We made two pompoms for the ponytails. Sewed to slippers.
We received these wonderful children's slippers!
