Triple fishtail made from rubber bands on the machine and on forks: the best master class for beginners with photos and videos. How to weave a fishtail bracelet from rubber bands Weaving from rubber bands on a fork: video tutorials

Weaving bracelets from rubber bands on a fork- a method of creating original jewelry and gifts with your own hands, accessible to everyone. Of course, today you can buy special plastic machines and slingshots, but it is those items that are at hand every day that are of particular interest. A table fork allows you to create very beautiful bracelets, not only simple, but also complex, multi-colored and wide.

In addition to the main tool that you can easily find in the kitchen, do not forget to buy elastic bands of the required color, as well as a hook that makes it easier to work with the material, and also clips with which you can fasten your bracelet.

You can weave various decorations and crafts on forks, even you can do it, although it is much easier to use a special loom for such shaped voluminous crafts.

Weaving bracelets from rubber bands on a fork

"Fishtail" is weaving a bracelet from rubber bands on forks, which is popular among beginning craftsmen, because it is always easier to learn on the narrowest bracelets, where there is no possibility of getting confused in the sequence of actions.

It is advisable to first choose two colors of rubber bands, this way you will definitely not get confused in the execution steps and will not spend money on a palette of colors, and only later you can weave a real “rainbow”.

So, each fork has four teeth, and we will put on the first rubber band by twisting it in a figure eight. The first “eye” is on the first two cloves, then we twist it and put it on the remaining two cloves. The cross weave then ended up exactly in the middle. As a rule, the first ring is always twisted in a figure eight; this is the main basis of a durable bracelet.

We move on to the second rubber ring, and put it on the fork, grabbing four cloves, so the middle two are in the middle of the ring, and the outermost ones hold the rubber band. Next we also put on the third one.

It’s time to remove the first “ears”, and for this we always use a hook, although sometimes you can hook it with your fingers, and some even claim that it’s much easier to work with your fingers. Real masters, and this is exactly what you want to become, always work with a plastic hook, with which you can carefully pick up the elastic band and remove it. First, remove one edge of the bottom one and throw it over two prongs so that it is in the middle. Then we do the same with the second “ear”.

Now you can move the structure down a little to make further steps easier to complete. You also need to put on the next ring, and now you have three elastic bands on again, and you need to hook both edges of the bottom one to the center.

In the same way we will repeat weaving from rubber bands on a fork, video This process will seem very simple to you, and you will definitely try to make such a bracelet with your own hands. You need to continue until your chain is the right size, after which you can think about how to complete your product and secure clips or other fasteners.

When your chain is the right size to fit comfortably on your hand, you no longer need to add new rings. Now you only have the last two rubber bands left on the fork, and the edges of the bottom one must also be removed into the middle. When you have only two loops left, tightened with elastic bands in the middle, you need to remove them with a hook, but do not let go, but connect them together and thread the fastener, and hook the second end of the fastener to the beginning. Now the bracelet can be put on your hand.

Weaving from rubber bands on a fork: patterns

To make a bright bracelet that will be full of colors and lift your spirits, you need to take bright rubber bands and alternate them when weaving. In fact, to fulfill weaving from rubber bands on a fork, diagrams are not needed, since there is only one algorithm, which cannot be described schematically with a drawing; it can only be shown in a step-by-step master class or video lesson.

As always, we will twist the first rubber band in a figure eight and put it on the two middle tines of the fork. The next twisted “eight” is put on one side on two teeth, and the third is put on the other two outer teeth in the same way.

Now let's move on to the next row, and to make it more clear weaving bracelets from rubber bands on a fork, video you can look. One ring should be doubled and put on the middle two ribs. Next, we use a crochet hook to grab the loop of the bottom elastic band and throw it over so that it goes over the middle tooth. We do the same with the second edge of this rubber band so that it ends up over the middle clove.

If you don’t have a hook on hand, you can also use a toothpick, the sharp end of which is also convenient for throwing over loops.

The next step is to put the folded elastic band in half again on the middle ribs, and then, as shown earlier, we throw the previous row over the created one. Further diagram of weaving bracelets from rubber bands on a fork involves alternating one rubber band in the center and two at the edges. Rainbow colors can be achieved if every two rows are done with a different color.

The loops from the outer teeth should always be transferred to the middle ones, and the lowest ones should be transferred to the top ones. An elastic band is always put on the middle, which must be folded in half, and the loops from the bottom row are removed on top.

At the end of the weaving, you will be left with two loops that need to be folded together and put on the clasp, and then secure it at the other end (at the very beginning). To straighten the bracelet, you need to stretch it a little in width and length, this way you will straighten out all the knots, and now your bracelet will look even and neat.

Some experienced craftswomen note that all the patterns on the fork are even more accurate than those for which a machine is used.

Weaving from rubber bands on a fork: video

Complex weaving from rubber bands without a machine on a fork can also be done, these can be various figures, which will then become stylish keychains, but the most popular pattern is, of course, a wide bracelet that will be woven on two forks. Only at first glance it seems that such weaving is very complicated and will take a lot of time, but after the first video lesson you will understand that there are no difficulties, and you will remember the algorithm the first time, and tomorrow you will teach this technique to your friends.

You can get an original bracelet if you combine colors correctly, for example, make a smooth color transition or use only the most fashionable colors. For girls, we advise you to take the most trendy colors of this season - purple and lilac, raspberry, pink and pale pink, white. For a bracelet on your hand, you will need 18 rubber bands of each color, so, already starting weaving, you know for sure whether you have enough material for this decoration or whether you need to go to the store in advance to replenish your supplies. After all, it is possible that you start weaving, but there is not enough material, and then in the store you will not find elastic bands of the desired color, and the product will be damaged.

The basis for this bracelet will be black rings; you will need 42 of them. It is advisable to immediately arrange the prepared rings into piles of flowers, and then you will no longer waste time choosing the desired color from the total mass. It is convenient to use plastic containers for storing multi-colored materials, where there will be a separate space for each color, so before starting the process there will be no need to prepare the materials for a long time, but only take out a table fork.

In order to get a beautiful wide weaving from rubber bands on a fork, video tutorials you can watch and draw information from them from real craftswomen. Two forks must be folded so that their tines point in opposite directions and secured with tape.

Now we take the first black ring, twist it in a figure eight and put it on the outer teeth of two opposite forks. The second “eight” of black color is placed on the outer teeth on the other side, and the third - on the center ones. It turns out that the third “eight” will immediately capture two pairs of teeth, which are located opposite each other.

In this case, the “fishtail” will be triple, but using this principle you can also make it quadruple, if you put one “eight” on each opposite clove, then in the first row you will have four “eights”. We will place another black ring on one fork, on its four cloves.

This was the first row of the base, and then the main structure begins. The first color is purple. Again, we put three rings on the opposite teeth, this time without twisting, again put another black ring on the front fork over four teeth. Next comes the second color row and the third row of your bracelet. Again you need to put three colored rings and another black one on one cutlery.

It's time to throw off the bottom rows. First, hook the black ring and remove it from the middle of the four cloves. Next, you need to remove the three lower “ears” of the figure eight from one fork, and then do the same with the other. When removing the “ears”, you need to pay attention so that they do not overlap the horizontal black elastic bands of the base, which must be pulled down so that they are above the rest of the weave of elastic bands.

Weaving from rubber bands without a machine on a fork

If you have already made it, you can also use it to create rubber decorations. And on forks you can always create the most original keychains, figurines, and so on, the main thing is to find a suitable master class.

You will find other interesting master classes with rubber bands, and learn how to weave bracelets on a slingshot and a loom. Such jewelry is very durable, they can withstand any climatic conditions and they do not wear out, but the main thing is that the material is of high quality and durable. Sometimes in the store you can find low-quality rubber goods that will tear during the process of creating a bracelet.

Weaving from rubber bands on a fork: video tutorials

How to make a bracelet from rubber bands using a Dragon Scale Iris fork

If you don’t have a weaving machine, you can adapt and make such a multi-colored bracelet with a fork. Good luck and write in the comments how you manage to weave.
Bracelets using rubber bands were invented by engineer Cheong Choon Ng for his children. In English they are called rainbow loom (rainbow - rainbow, loom - weaving machine). This hobby has become very popular among schoolchildren all over the world. In 2013, approximately 1.3 million machines were sold. On the Russian-language Internet, such rubber bands are called “iris”. They are good because they help develop attentiveness, perseverance and intelligence in children. This is a serious argument for parents to support such a hobby. Watch, try weaving and don’t forget to share the link to our video with your friends.

Bracelet made of rubber bands "Four-layer fishtail" (on forks)

Weaving a simple and beautiful Rainbow Loom bracelet on a fork

How to weave bracelets from rubber bands without a fork loom. Fishtail bracelet.

Bracelet Triple Fishtail, WITHOUT MACHINE, Rainbow Loom Irises

From this video tutorial you will learn how to weave a Triple Fishtail Bracelet WITHOUT a loom using Rainbow Loom rubber bands. We will need 2 forks and 18 rubber bands of 6 colors + 42 black rubber bands. Good luck!

Nowadays, weaving from rubber bands is becoming a very popular type of handicraft; even children are starting to do it, because it does not require much investment, and as a result, you can quickly make a beautiful decoration, craft or toy. In this article you can learn how to weave a triple fishtail pattern bracelet, which can be easily made from rubber bands quickly and easily with your own hands on a loom and forks!

There are several varieties of fishtail weaving: double, triple and quadruple fishtail. The most common is triple. We will consider its production further.

The “Triple Fishtail” rubber band bracelet can be woven from beautiful colorful rainbow and bright rubber bands; it turns out dense and wide. This bracelet can be worn by both adults and children.

A beautiful bracelet can serve as a cute and pleasant gift for your loved ones, since it is made with your own hands, and you put a piece of yourself into it.

Let's figure out how such a wonderful bracelet is made.

Let's look at making a “Triple Fishtail” bracelet from rubber bands on a fork

Not everyone wants to get a weaving machine to try making a bracelet, so you can use what you definitely have at home - forks!

Weaving with forks takes about 30 minutes.

Bracelet ingredients:

Forks (2 pieces)
Hook
Clip fastener

How to do:

Take two forks and place them next to each other so that their tines point in different directions.
Place three layers of elastic bands over three prongs (the two middle prongs are represented as one).
Throw everything off the forks onto the bottom layer.
Start weaving with a hook, throwing one layer at a time.
Watch the video of the master class.

You will succeed!

Let's study how to make a Triple Fishtail bracelet on a machine

So, you have decided to start weaving a “Triple Fishtail” bracelet from rubber bands on a machine, then you have come to the right place!

First you need to prepare the machine.

How to properly prepare the machine?

To do this, you need to place the removable posts of the machine for weaving from rubber bands. You only need two rows of three columns.

Important: Both columns must be at different levels, that is, the left column must be one lower than the right one.

You need to hide the bottom under the working posts so that what happens during weaving does not interfere with the work.

Your machine should look something like the photo.

Let's move on to weaving the Triple Fishtail bracelet on the machine

You can take rubber bands of any color, the main thing is that you yourself do not get confused in these colors. For the first time, you can take one color just to understand the technology of weaving from rubber bands. If you want to get a design, then it is recommended to take four colors, one of them should be the base one, it will border the side of the bracelet, and the other three.

Bracelet ingredients:

Rubber bands (42 side + 108 any other)
Prepared machine
Hook
S-shaped clip-fasteners

Important: when weaving, it is necessary to connect the posts horizontally.

Elastic bands of color 2 – side ones. Elastic bands in colors 1,3,4 are your fishtail braids.

Take color 1 rubber bands of the same color and place them on the figure eight posts. These “eights” should be located diagonally.
On the left columns (which are located one lower) one elastic band of color 2 is put on without twisting.
On the columns over the elastic bands of color 1, put elastic bands of color 3 and color 4 without twisting. It should look like the letter “W” with a slant.
Now remove the loops using a hook.
Move the elastic band of color 2 to the center of the elastic bands of color 3 and 4. It turns out that the elastic bands of color 1 are arranged in a figure eight, and colors 3 and 4 are tied in the middle with an elastic band of color 2.
Place an elastic band of color 2 on the left side.
Remove a color 1 elastic band from each right post.
Now is the most difficult part, since you need to hook not from the outside, but insert the hook between two lines of color 2, and remove the loops of color 1 from the left edge.
The first layer is ready, now you can string elastic bands of color 1 in the same way, one elastic band of color 2 on one side and remove elastic bands of color 3.
During weaving, the resulting layers will go down, and it will be convenient for you to continue weaving.
Repeat the previous steps as many times as necessary.

How to finish weaving?

So, you have come to the end of the weaving and you need to close the loops.
On each vertical there should be two rubber bands of color 2 and two of any colored rubber bands.
Just remove the top elastic band of color 2 and put it away, and the bottom one in the center. We remove the other lower loops to the center, leaving only the upper ones, of the same color.
Let's throw them from the right side to the left and fasten them with S-shaped fasteners.
We attach the first layer of elastic bands of color 1 to the other end of the fasteners.

If you follow the instructions, your braided rubber band bracelet will turn out just like in any photo or even better!

The bracelet is ready! Wear it with pleasure and delight yourself with new crafts.

Watch the video of the master class for a more precise understanding of the instructions for weaving a “Triple Fishtail” from elastic bands on a machine.

Weaving jewelry from multi-colored rubber bands is a new and interesting direction in needlework. Mostly, rubber bands are used to make wrist bracelets. These bracelets come in different shapes and are made using different techniques. We suggest considering one of the options for making a “Fish Tail” without using a machine.

To make a bracelet you will need materials:

forks in the amount of 2 pcs. are attached to each other using adhesive tape;
elastic bands in yellow, pink and lilac colors;
hook for weaving a bracelet;
clasp.

Weaving stages

1. First you need to take a pink elastic band and put one part on the 4 tines of a fork. Then we take the other end of the elastic band and cross it between two forks in the form of an “8”. We put the free end of the elastic band on the 4 prongs of the second fork.

2. We put the yellow elastic band on all the prongs of the forks at the same time. We get a square.

3. In the same way, put on another yellow elastic band.

4. Using a crochet hook, you need to lift the bottom of the pink elastic band.

5. Loop the elastic around the top of the fork tines, moving toward the center between the forks.

6. Remove half of the elastic from the hook.

7. We also draw the second part of the pink elastic band around the tines of the fork.

8. Then remove the elastic from the hook and get a pink elastic knot.

9. Use a crochet hook to hook the bottom of the yellow elastic band.

10. We draw an elastic band around the teeth.

11. Remove the elastic from the hook.

12. Using the same method, remove the second part of the yellow elastic band from the other fork.

13. We put a pink elastic band on the tines of two forks.

14. Use a crochet hook to hook the bottom yellow elastic band.

15. We draw the tip of the elastic band around the teeth.

16. Remove the yellow end of the elastic from the hook.

17. We do the same with the other end of the elastic band.

18. We put a lilac elastic band on the forks.

19. Use a crochet hook to hook the bottom of the yellow elastic band.

20. Draw both pieces of yellow elastic around the tines of the fork.

21. Then we put another lilac elastic band on the tines of 2 forks.

22. Use a crochet hook to grab the bottom elastic band. We trace the teeth of the forks and remove the ends of the rubber bands in the center.

23. We put the third lilac elastic band on the forks.

Many people think that weaving wide bracelets from rubber bands is very difficult. However, this is not always the case. For example, a triple fishtail or fishtail bracelet is quite within the capabilities of a person who has mastered the basic methods of weaving. Therefore, today we will tell you how to weave a triple bracelet from rubber bands.

Triple bracelet on the machine

A dense, bright and wide fishtail is a must for anyone who practices rubber band weaving. For a triple bracelet woven on a machine you will need:

Machine;
Hook;
Elastic bands;
Clip clasp.

A triple bracelet made from rubber bands can be woven on a machine in just 15 minutes.

Before starting work, it is worth removing the third row of posts so as not to be distracted by them while working. It is also worth altering the machine so that the near row protrudes slightly forward compared to the far row.

The main work will take place on only 6 columns. The plastic base must be moved so that there is free space under the working columns. After all, we will weave the bracelet downwards, under the posts.

You will need to select colors. Usually they choose one main color that goes along the edges. In this case it is white. There will also be an alternation of three colors.

The rubber bands should be quite tight, since in this case this will be a good test of their strength.

Weaving is quite simple if you remember the order of actions and colors. Always after throwing on the transverse elastic bands, we pull the white (main) one over all three columns.

Then remove the lowest white one from the outside to the center. Then we remove the lower colored ones from the inside to the center - first from the right columns, then from the left.

The video shows this process more clearly.

We weave a bracelet using forks

Since we only use 6 columns when working, why not try to weave this bracelet using forks? You will need:

2 forks;
Hook;
Clip clasp;
Rubber bands – 42 black and 18 pieces each in 6 different colors.

Weaving with forks takes about 25 minutes.

First, we throw on three layers of elastic bands, then we throw everything off the forks onto the bottom layer and begin to slowly weave, throwing one layer at a time.

If you want to weave not a triple, but a quadruple fishtail, you can put rubber bands not on three teeth (2 teeth in the center are taken as one), but on all four.

This is an excellent alternative for those who find it easier to work with forks.

Fishtail on 2 machines

If you want to be original and weave a triple bracelet from rubber bands using a different pattern, then this is the place for you! For this weaving you will need:

2 machines;
Hook;
S-shaped clasp;
Elastic bands – 25 black, 11 light green and 6 pieces of other colors in 11 shades.

Making a fishtail this way will be very difficult for beginners; weaving it takes about 15 minutes.

Here we start not by throwing on the main rubber bands, but by throwing colored rubber bands on all the posts, and we do not disassemble the machine.

2 machines are used to make the required length. Therefore, we attach one to the other, attaching the columns of the second to the base of the first.

Then we pull elastic bands of the main color - black - on top of the triangle. After which we turn the machine away from us and begin to throw the colored ones.

At the end of weaving, we carefully remove all the elastic bands at the beginning and end, fasten them, put on the clasp and remove the entire structure.