Knitted vest with buttons on the sides. Women's vest with knitting needles: creative models, diagram with description, patterns, photos. How to knit a women's vest for beginners? Knitting patterns for women's vests. Women's knitted vest

Size: 40.

Materials:

100 g green yarn, 100 g white yarn (100% acrylic, 400 m/100 g),
knitting needles No. 4,
buttons - 8 pcs.

Facial surface: facial rows - faces. p., purl rows. P.

Garter stitch: front and back rows - front loops.

Description of knitting sleeveless vests

Back:

Using two ply yarn (1 green thread, 1 white thread), cast on 62 stitches and knit 2 rows in garter stitch. Then knit in stockinette stitch. At a height of 11 cm from the cast-on edge, for narrowing, on both sides of the piece, in every 4th row, cast off 4 times, 1 p. Then knit 4 cm straight. To expand, on both sides of the part, in every 4th row, add 1 st 4 times. At a height of 27 cm from the cast-on edge, for armholes, on both sides of the part, close 4 sts and in every 2nd row bind off 1 time 2 stitches, 1 time 1 stitch. At a height of 43 cm from the cast-on edge, for the neckline, bind off the middle 14 stitches and knit both sides separately. To round, from the neck side, in every 2nd row, cast off 3 stitches once, 2 stitches once, 1 stitch once. At a height of 46 cm from the cast-on edge, bind off all loops.

Before:

Consists of two shelves. For the right front, cast on 30 stitches and knit 2 rows in garter stitch. Then knit in stockinette stitch. At a height of 11 cm from the cast-on edge, for narrowing, on the left side of the part, in every 4th row, close off the 1st stitch. Then knit 4 cm straight. To expand, on the left side of the part, in every 4th row, add 1 p. 4 times. At a height of 27 cm from the cast-on edge, for the armhole, on the left side of the part, close off 4 p., and in every 2nd row, close off 1 times 2 p., 1 time 1 p. At a height of 39 cm from the cast-on edge, for the neckline, on the right side of the part close 1 time 5 p., 1 time 4 p., 1 time 2 p., 1 time 1 p. Then knit straight without changes. At a height of 46 cm from the cast-on edge, bind off all the loops. Knit the left front in the same way, but in a mirror image.

Assembly:

Sew shoulder and side seams. Along the side edge of the shelves, cast on loops on the knitting needles and knit the strips in garter stitch (knit 4 rows for each strip). While knitting the placket, make holes for buttons on the right shelf. Sew buttons on the left shelf. Crochet the armholes st. b/n., perform 4 rows.

Vests allow modern fashionistas to successfully combine different looks; just add a stylish vest to an ordinary blouse or shirt, and your look will immediately be transformed. To have such an amazing thing in your wardrobe, you don’t have to run to the nearest stores; you can quite easily knit such a thing yourself. Difficult? Not a bit! It is in this article that we invite you to consider several options for how to knit a women’s vest.

Preparing for work

Before you get started, you need:

Pattern. If you want your product to fit you perfectly, then do not neglect creating a pattern, since each figure has its own characteristics. To do this, you need to take several measurements:

neck girth;
chest girth;
length of the product;
armhole depth.

Having all this data, you can safely start creating a pattern with a description. If this is too difficult for you, then you can use special programs that will create a pattern according to your parameters and even calculate the required number of loops.

Selecting a suitable model. If you are not particularly proficient with knitting needles, then you can opt for simpler models, with a simple pattern and cut. If you are confident in yourself, then you can take on complex patterns using patterns such as “arana”, “braid” and so on.
Well, the last thing is the choice of yarn and knitting needles. This point should also not be omitted, since correctly selected yarn and knitting needle size play a very significant role. For example, there are models that will look good if knitted from thick yarn and on large knitting needles, but if you want to knit, on the contrary, a light lace product, then thin knitting needles and yarn will suit you.

We bring to your attention several models for both beginners and experienced craftswomen.

Simple cut

Despite the fact that this cut is very simple, nevertheless, it looks very stylish and beautiful. It will go perfectly with an office shirt or on its own.

This option is incredibly simple to knit; just knit a rectangle with knit or purl stitches and with slits for the arms.

The main decor in this model is stylish buttons.

Extended model

This option is also suitable for beginner craftswomen, since it does not contain a complex pattern or cut.

For those with curvy figures

Another advantage of a vest is the ability to hide figure flaws. If you have some complexes about your figure, then we offer you several detailed diagrams for obese women.

option 1:

option 2:

option 3:

Light and delicate

This vest will complement your basic summer dress, adding elegance and romance to your look. Perfect for a cool summer evening.

Warm new thing

The beauty of this vest is in the voluminous warm collar, which is made with 3*3 elastic.

This model with buttons is quite elegant, perfect for office style.

As you can see, there is nothing complicated about knitting a vest with your own hands; perhaps this is even one of the simplest types of product that even a schoolchild can handle. It is enough just to be able to hold the knitting needles correctly and know how to perform the basic loops.

Video on the topic of the article

Sizes: 32/34 (36/38, 40/42, 44/46 and 48/50).

You will need: 300 (350/400/ 450/450) g of green (col. 00570) yarn Schachenmayr MERINO EXTRAFINE SILKY SOFT 120 (68% wool, 32% lyocell, 120 m/50 g); knitting needles No. 3.75 and No. 4; 1 button.

Garter stitch: knit. and out. R. - persons n. In circular rows, knit alternately 1 circular r. p., 1 circular r. persons

Facial surface: faces. R. - persons p., out. R. - purl P.

Openwork pattern A and B: knit according to the patterns on which the faces are shown. and out. R. Read faces. R. from right to left, purl. R. - from left to right. Repeat from 1st to 8th row.

Knitting density, knits. satin stitch and openwork pattern, knitting needles No. 4: 22 sts and 30 r. = 10 x 10 cm.

Back: on knitting needles No. 3.75, cast on 96 (106, 116, 126, 136) sts and knit 5 r. garter stitch, starting from purl. R. Switch to needles No. 4 and continue knitting. satin stitch After 6 cm, decrease 1 x 1 p. on both sides, then in every 8th r. 3 x 1 p. as follows: knit chrome. and k1, then k2 together; knit until the last 4 stitches of the row, 1 stretch (= remove 1 stitch as knit, 1 knit and stretch it through the removed loop), k1, chrome. = 88 (98, 108, 118, 128) p. Knit another 8 p., then add 1 x 1 p. on both sides, then in every 8th p. 3 x 1 p. as follows: knit 1 person. cross. from a transverse thread at a distance of 3 p. from each edge = 96 (106, 116, 126, 136) p. For armholes after 35 (35, 34, 33, 32) cm, close on both sides 1 x 3 (4, 6, 8, 10) p., in the next 2nd p. 1 x 2 p., then decrease on both sides in every 2nd p. 5 x 1 p. as follows: cro., k1, then 2 p. together knit., knit until the last 4 p. of the row, 1 stretch, 1 knit., cro. = 76 (84, 90, 96, 102) p. To form a shoulder bevel, after 44 (46, 47, 48, 48) cm, add 1 x 1 p. on both sides, then in every 6th p. 3 x 1 p. as follows: knit 1 person. cross. from a transverse thread at a distance of 2 p. from each edge = 84 (92, 98, 104, 110) p. After 52 (54, 55, 56, 56) cm, close on both sides 1 x 4 (5, 7, 6, 8) p., then in every 2nd p. 3 x 6 (7, 7, 8, 8) sts. To cut the neckline, after 52 (54, 55, 56, 56) cm, bind off the central 26 (26, 28, 30, 32) sts and complete each half separately. From the edge of the neckline close in every 2nd r. 1 x 5 sts and 1 x 2 sts. For the neckline (which is not shown on the pattern), cast on 46 (46, 48, 50, 52) sts along the edge of the neckline using knitting needles No. 3.75 and work 6 p. garter stitch. Close on both sides every 2nd r. 3 x 1 p. Then bind off the remaining 40 (40, 42, 44, 46) p.

Left shelf: On needles No. 3.75, cast on 55 (60, 65, 70, 75) sts and knit 5 rows. garter stitch, starting from purl. R. Switch to needles No. 4 and knit as follows: chrome, 29 (34, 39, 44, 49) sts. satin stitch, 8 p. openwork pattern A, 2 p. knit. satin stitch, then for the placket 14 stitches and edge. garter stitch. Make the fit, armhole and top of the shoulder as on the back, making all increases and decreases from the right edge. To cut the neckline, after 20 cm, decrease 1 x 1 p., then in every 2nd p. 22 (22, 23, 24, 25) x 1 p. as follows: perform 1 stretch at a distance of 4 p. to the openwork pattern. For the shoulder bevel, after 52 (54, 55, 56, 56) cm, close off 1 x 4 (5, 7, 6, 8) sts from the right edge, then in every 2nd r. 3 x 6 (7, 7, 8, 8) sts. Cast off remaining sts. The front shoulder is 2 cm wider than the back shoulder, these 2 cm will be sewn to the back neckline.

Right shelf: knit symmetrically to the left shelf, after the first 5 rows. continue knitting as follows: knit stitch, 14 sts in garter stitch for the placket, then 2 sts. satin stitch, 8 stitches of openwork pattern B, 29 (34, 39, 44, 49) stitches. iron, chrome After 20 cm, make a buttonhole as follows: in knits. R. chrome and 5 sts according to the drawing, then close 3 sts, knit the remaining loops according to the drawing. In the next purl. R. cast on 3 sts over closed loops. For the neckline, sew a hem, 14 stitches in garter stitch, 2 stitches in knit stitch. satin stitch, 8 p. openwork pattern B, 2 p. knit. stitch, then knit 2 stitches together, knit the remaining stitches according to the pattern.

Assembly: make shoulder seams, sew the last e-strips of the front panels to the corresponding side edges of the back neck strip. Using knitting needles No. 3.75, cast on 80 (88, 98, 108, 116) sts along each edge of the armhole, knit 9 r. garter stitch and bind off the stitches. Sew side seams and armhole strap seams. Sew a button.

36/38 (40/42)

You will need

Yarn (70% wool, 30% alpaca wool; 140 m/50 g) - 500 (550) g anthracite and 350 (400) g burgundy; knitting needles No. 3.5 and 4.5; stocking needles No. 3.5; 8 silver metal buttons with a diameter of 23 mm.

Patterns and schemes

Rubber

Alternately 1 knit, 1 purl

Basic pattern

Knit according to the given pattern. In purl rows, knit loops according to the pattern, knit yarn overs purl. Constantly repeat in height from the 1st to the 20th row. When decreasing incomplete repeats, knit in stockinette stitch.

Button loops

From the right edge = edge, knit 3, close 1 stitch. From the left edge = 1 p. bind off, knit 3, chrome. In place of the closed loop in the next row, cast on 1 new loop.

Knitting density

21 p. x 30 r. = 10 x 10 cm, knitted with the main pattern on knitting needles No. 4.5.

Pattern

Completing of the work

Back

With anthracite thread on knitting needles No. 3.5, cast on 102 (112) sts and for the bottom bar knit 5 cm = 17 r. with an elastic band, starting from the purl row.

For the fastener strap, add on both sides in the 3rd and every 2nd r. 30 times 1 p.: knit the first 9 added loops on both sides with an elastic band, knit all other loops with stockinette stitch = 162 (172) p.

After 4 r. From the last increase, make holes for buttons on both sides.

After 26 r. = 9 cm from the button holes, make 1 more button hole on both sides.

After 4 r. From the last button holes, close 1 stitch on both sides, then bind off in each row 29 more times, 1 stitch = 102 (112) stitches.

After 23.5 cm = 70 rub. from the last decrease, close on both sides for shoulder bevels 1 time, 5 (4) p., then in every 2nd r. close 4 more times, 5 (6) p.

Simultaneously with the beginning of the shoulder bevels, close the middle 18 (20) stitches of the neckline and finish the left side first.

To round the neckline, close every 2nd r. along the inner edge 6 times 2 p.

After 4 cm = 12 r. All loops must be closed from the beginning of the cutout.

Finish the second side symmetrically.

Before

On knitting needles No. 3.5 with burgundy thread, cast on 102 (112) sts and for the bottom bar knit 5 cm = 17 r. with an elastic band, starting from the purl row.

After 53 cm = 160 rub. From the bottom bar, close the middle 18 (20) stitches of the neckline and finish the left side first. Along the inner edge in every 2nd r. close to further round the neckline 6 times, 2 stitches each.

After 5 cm = 16 r. From the beginning of the cutout along the outer edge, make shoulder bevels, as on the back: close 5 (4) p. once, then in every 2nd r. close 4 more times, 5 (6) p.

Finish the second side of the part symmetrically.

Assembly

Sew shoulder seams.

For the collar, use stocking needles to cast on 120 (124) stitches along the edge of the neckline, distributing them over 4 needles, and knit 20 rounds. with an elastic band, then bind off all the loops.

Fold the collar in half lengthwise with the wrong side inward and sew.

Sew 4 buttons to the front fastener bar according to the height of the holes for them: the distance from the bottom bar is 13 cm and 23 cm, respectively, the distance from the side seams is 5 cm.

Next to these buttons, sew 1 more decorative button, each of them at a distance of 4 cm from the previous one (see * on the pattern). When buttoned the front is shorter than the back, the gray clasp bar overlaps the burgundy clasp bar, all 8 buttons are visible on the front.

Comfortable extended buttoned vest knitted and is decorated with a beautiful “lace leaves” pattern framed with pearl knitting. Knitted vest Can be worn at any time of the year in cool weather for a walk.

SIZES: 36-38 (40-42) 44-46
For sizes 36-38 the data is given before brackets, for sizes 40-42 - in brackets, for sizes 44-46 - behind brackets. If there is one number, it applies to all sizes.
YOU WILL NEED: yarn (100% sheep wool; 70 m/50 g) - 500 (550) 600 g blue; 5 dark blue buttons; knitting needles No. 5.5; long circular needles No. 5.5.

Pattern 1: knit stitch = knit rows - knit stitches, purl rows - purl loops.

Pattern 2: purl stitch = knit rows - purl loops, purl rows, knit stitches.
Pattern 3: placket pattern = rib: alternately 2 loops in stockinette stitch, 2 loops in purl stitch.

Pattern 4: double pearl pattern = alternately 1 stitch in stockinette stitch, 1 stitch in purl stitch, shift pattern by 1 stitch in every 2nd row.
Pattern 5: openwork “leaves” pattern on 26 loops = knit according to the pattern. The diagram shows only the front rows. In purl rows, knit loops according to the pattern, knit yarn overs purlwise. Constantly repeat rows 1-16 in height.

Knitting density: double pearl pattern - 16 p. x 21 r. = 10 x 10 cm; openwork pattern - 26 p. = 14 cm wide.

Description of knitting a vest:

Knitting the back of the vest: cast on 82 (90) 98 stitches on the knitting needles and knit 4 cm with a strip pattern, while in the last row, evenly distributing, add 3 (1) 1 p. Next, between the edge knit 10 (12) 14 p. with a double pearl pattern (start with 1 purl), 26 p. openwork pattern, 11 (13) 17 p. double pearl pattern (start with 1 front), 26 p. openwork pattern and 10 (12) 14 p. double pearl pattern (start 1 front). After 44 (43) 42 cm from the bar for the armholes on both sides, close 1 x 4 p., then in every 2nd row 1 x 3 p., 1 x 2 p. and 1 x 1 p. After 64 cm from the bar for the neckline, close the middle 31 (33) 37 p. Finish both sides separately, while to round the neckline in the 2nd row, close 1 x 3 p. After 66 cm from the bar, close the remaining loops straight.

Knitting the right front: cast on 42 (42) 46 stitches on the knitting needles and knit 4 cm strips in a pattern, while in the last row, evenly distributing, add 0 (3) 2 p. Next, between the edge knit 4 (5) 6 p. with a double pearl pattern (start with 1 purl (1 knit) 1 purl), then 26 p. openwork pattern and 10 (12) 14 p. double pearl pattern (start with 1 knit). At the same height and in the same way as on the back, make an armhole along the left edge. Simultaneously with the beginning of the armhole for the bevels of the neckline along the right edge, bind off 1 x 1 p., then in every 2nd row, bind off 14 (15) 16x1 p. and in every 4th row, 3 x 1 p. Close off the remaining shoulder loops directly on Same
height as on the back.
Knit the left front symmetrically to the right front.

ASSEMBLY: Lightly moisten the parts, stretch according to the pattern and leave until completely dry. Use a mattress stitch to sew the shoulder seams. Along the straight edges of the shelves and along the neckline, using circular knitting needles, cast on 240 (244) 248 sts and knit 3 cm with a strip pattern, while after 1.5 cm on the right fastener strap, evenly distributed, make 5 holes for buttons - close 2 loops and in the next row in the same place again cast on 2 loops. Close the loops as in purl knitting. Along the edges of the armholes, using circular knitting needles, cast on 74 (78) 82 stitches and knit a 4 cm strip pattern. Close the loops as in purl knitting. Sew side seams. Sew buttons.
Finally, lightly steam all seams.